BartPE Plugin Paragon Backup & Recovery 10

SIW2,

I decided to try to create a disk containing both PM10 and BR10 manually as per your previous updated instructions.

Although I modified this command -

imagex /boot /compress max /capture E:\TEST\1 E:\boot.wim "Paragon Winpe"

...to this -

imagex /boot /compress max /capture H:\TEST\2 H:\boot.wim "Paragon Winpe"

....to suit my setup.


I then created the iso image using ImgBurn (used the Win7 x86 boot image again).
Everything seemed to go ok...........but

When run in Virtualbox I now get this error message -

CD BOOT: Cannot boot from CD - Code: 5

Unfortunately I'm struggling with all this especially considering I'm new to Virtualbox and ImgBurn

 

Hi Sope,

Thanks for the feedback.

Please try this instead :

http://cid-b0a22789320e3247.skydrive.live.com/self.aspx/pe/7pecreatorV3.7z

(You need to delete or rename the existing PARFILES folder you already have, as this will create another and hopefully do the whole job successfully).

 

Hi SIW2,

Brilliant! You're a star!
7pecreatorV3 works perfectly!

It ran all the way through, including burning the CD, without a hitch.
The instructions and messages it gives along the way are great too, clear and simple and easy to follow.

The created CD boots and works beautifully on my system.
I've also tested the iso image within a Virtualbox VM and it works exactly as expected.

Thanks very much for all your efforts and for persevering with this. It is exactly what I was looking for, and more than I expected.
I really am very grateful.

Best regards,
Sope

 

Hi Sope,

You're welcome.

I am delighted it worked for you.

 

the link doesn't work

the link doesn't work again

 

Fixed

 

thanks

 

New versions here:

To create Winpe2.1 or WinPE 3cd/flash including your installed Paragon apps.

If you are booted into Vista/XP use this version:

http://cid-b0a22789320e3247.skydrive.live.com/self.aspx/pe/ParpeMakerVXP.exe

If you are booted into Win 7, use this version:

http://cid-b0a22789320e3247.skydrive.live.com/self.aspx/pe/Parpecreator7v5.exe




Instructions are the same for both versions:

1. Copy the contents of the 32 BIT Vista/7 install dvd , OR 32 BIT Win7 repair disc onto your boot partition ( the one you are currently booted into, usually C ).


2. Rt click and run as admin on the ParPeMakerVistaXP.cmd,

or if you are using the Win 7 version, rt click and run as admin on Parpecreatror7.cmd


3. You will be asked to browse to boot.wim inside the "sources " folder of the windows install/repair disc files you have just copied onto your partition.


4. Then you will be asked to browse to the launcher.exe of the Paragon product you wish to include.



Note the Paragon product must be installed already.

You can include Paragon PM 2010 Free, or PM10 Personal, or PM9.5. You can include as well , or instead , B&R10 Free, or B&R10 Compact.


The windows 7 version ( parpecreator7 - which you can only run from within Windows 7 ) also offers to add 32 BIT drivers to the WinPE 3.0 media.

IF you don't have the install/repair disc to hand, The 32 BIT Win 7 ( WinPe 3.0 ) Repair disc is available for download from here:

http://neosmart.net/blog/2009/windows-7-system-repair-discs/

 

Hi,

I can not get the wnaspi32.dll in the system32 folder.

I search in my C drive and found a lot of them, all different sizes.

May I use any of them?

Regards,

 

Are you making Bartpe cd?

You should find it in the Paragon "program" folder

E.G "C:\Program Files (x86)\Paragon_Software\Hard_Disk_Manager_2010\program\wnaspi32.dll"

 

I just joined the forum and pls help me fix my PC.

In short,

I have been using Paragon Drive Backup 8.5 Special Edition for a long time.
Recently my Windows crashed, luckily I have a backup of Drive C: from not so long ago. I tried to restore from external USB to Drive C: but it won't let me restore because of drive is being used by the system.

Now I think BartPE can help me do the restoring. I created BartPE CD but could not find Paragon Drive Backup 8.5 SE plugin anywhere. Even the company's website rejects my registration email.

Can someone guide me please?? I just want to download Bart plugin at this stage and see how I go.

 

Teken,

Use the following link for the plugin:

http://ftp.paragon.eu.com/US/DB/PSG_BartPE.zip

 

thanks

sorry copy the contents of the 32 BIT Vista/7 install dvd ?
what exactly?
i mean which folder? files..

thanks

and i can install many paragon programs inside them , i mean wimpe cd?

 

Re: thanks

Yes you can install many paragon inside - no point in putting too much in there as it will get quite big.


To do this :

1. Put the Vista/Win 7 recovery cd in the dvd drive.

2. Rt click the dvd drive and Select COPY.

3. RT click your hard drive ( e.g. C ) and PASTE.

You will need a specially adapted version of my little app. if you want to add Alignment tool . Will post it up when I get time.

 

Re: thanks

i have to copy all the dvd on my pc? can't read directly from my dvd

it could be really great a program that can create winpe ,and add software not only paragon for example
a on demand anti spy scanner or a program like total commander

thanks

 

Re: thanks

Hi Mantra,

1. Put the Vista/Win 7 32 bit recovery cd in the dvd drive.

2. Rt click the dvd drive and Select COPY.

3. RT click your hard drive ( e.g. C ) and PASTE.

4. D/L this http://cid-b0a22789320e3247.skydrive.live.com/self.aspx/pe/HDMaddPAT.zip

unzip it and run the self extractor - you will get a folder calld HDMaddPAT.

Inside that you will see this - run the HDMaddPAT.cmd.








( do not run the MakeDBProWinPe.cmd - that is for someone else )

 

Re: thanks

New versions to make WinPe 3 boot media . From within windows 7 ( rt click and run as admin on 7pecreator.cmd), or from within Vista/XP ( rt click and run as admin on XPVpecreator.cmd).

Parpecreators2.zip

 

Re: thanks

Thanks, must have been a Skydrive glitch as your files have become available again. Good job!!

 

Re: thanks

Glad it worked for you.

Couple of minor improvements in this version: Parpecreators2.zip

 

i am having troubles getting launcher to run from within a batch file.

SIW2 at the time of this writing i was unable to download your parpecreators as the site told me that the bandwith limit was exceeded.


For those who are interested, I have a made plugin that will autorun the command to delete the registry key after the PE
enviornment is loaded. I found it a real pain to delete it manually every time.
And by the way, thanks to ParagonTommy for taking the time to write the plugin for BART PE. And thanks to SIW2 for all of his efforts and making his parpecreators.


This works on XP only.

1.
Create a new Directory in the PLUGIN Folder named fixdb9x

by default it will look like this:

C:\pebuilder3110a\plugin\fixdb9x

2.
copy View attachment fixdrivebackup9x.inf.txt and View attachment autorun1fixdb9x.cmd.txt
onto the fixdb9x folder and remove the .txt extension.

3.
make sure autorun is enabled. open the ..\plugin\autorun\autorun.inf
with notpad and make sure Enable=1

it looks like this :

[Version]
Signature= "$Windows NT$"

[PEBuilder]
Name="Startup Group"
Enable=1
Help="autorun.htm"
Version=1.0.5

This plugin uses autorun to execute the batch file automaticly as soon as
the BART PE is loaded. It is basicly like the startup folder in the Start menu in windows xp.

 

Thanks for posting that Jason. I am sure it will be helpful for those making BartPe discs.

It's not clear to me what the bandwidth limits are on skydrive.

Since those apps. are under 20mb - looks like a lot of people are trying to d/l them.

 

Plugin Download Link is not longer working. Haven't been able to find an alternate download location.

 

Plugin link fixed:

http://ftp.paragon.eu.com/US/DB/PSG_BartPE.zip

 

Hi

Don´t work
Error 404

Regards