TI9 will not find my firewire ext HD

Discussion in 'Acronis True Image Product Line' started by whscott, Apr 26, 2006.

Thread Status:
Not open for further replies.
  1. whscott

    whscott Registered Member

    Joined:
    Mar 18, 2005
    Posts:
    15
    I have updated to latest build, and tried the "acpi=off noapic" option. Neither worked.

    Attached sysinfo.txt file.
    The device WD 1600JB is listed a few times in the text below.

    Here is paste of sysinfo.txt:


    $ cat /proc/version
    Linux version 2.4.32-acronis#1 SMP Tue Mar 21 14:12:35 MSK 2006

    $ cat /proc/cmdline
    MBRCRCS=4BE9A84F,FC509B1E,FC89B81B ramdisk_size=27668

    $ cat /proc/interrupts
    CPU0 CPU1
    0: 26698 0 IO-APIC-edge timer
    1: 373 0 IO-APIC-edge keyboard
    6: 7 0 IO-APIC-edge floppy
    9: 0 0 IO-APIC-level acpi
    12: 19 0 IO-APIC-edge PS/2 Mouse
    14: 10 1 IO-APIC-edge ide0
    15: 14 0 IO-APIC-edge ide1
    16: 0 0 IO-APIC-level usb-uhci, usb-uhci
    18: 5355 0 IO-APIC-level ide2, ide3, usb-uhci
    19: 13 0 IO-APIC-level usb-uhci
    20: 215 0 IO-APIC-level ohci1394
    23: 0 0 IO-APIC-level ehci_hcd
    NMI: 0 0
    LOC: 26607 26606
    ERR: 0
    MIS: 2

    $ cat /proc/modules
    md_mod 67852 0 (unused)
    snapapi 21936 0 (unused)
    jfs 142032 0 (unused)
    xfs 443356 0 (unused)
    reiserfs 170256 0 (unused)
    ext3 57164 0 (unused)
    jbd 38116 0 [ext3]
    ext2 32768 0 (unused)
    nls_cp850 3400 0 (unused)
    smbfs 39160 0 (unused)
    af_packet 9036 0 (unused)
    mousedev 3724 1
    input 3008 0 [mousedev]
    ide-scsi 8992 0
    sbp2 15888 0
    e1000 85196 0 (unused)
    ohci1394 22972 0 (unused)
    ieee1394 41124 0 [sbp2 ohci1394]
    usb-uhci 21580 0 (unused)
    ehci-hcd 17060 0 (unused)
    usbcore 57420 1 [usb-uhci ehci-hcd]
    ataraid 6052 0
    ide-disk 13608 0
    pcmcia_core 40868 0
    ide-detect 144 0 (unused)
    piix 8480 2
    ide-core 96084 0 [md_mod ide-scsi ide-disk ide-detect piix]
    pci_hotplug 14924 0
    nls_utf8 544 2
    udf 82240 0 (unused)
    isofs 17716 0 (unused)
    vfat 9560 1
    fat 30168 0 [vfat]
    sg 26112 0 (unused)
    sr_mod 13372 0 (unused)
    cdrom 26240 0 [sr_mod]
    sd_mod 10268 0
    scsi_mod 55000 5 [ide-scsi sbp2 sg sr_mod sd_mod]
    floppy 47960 2

    $ cat /proc/pci
    PCI devices found:
    Bus 0, device 0, function 0:
    Class 0600: PCI device 8086:2578 (rev 2).
    Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
    Bus 0, device 1, function 0:
    Class 0604: PCI device 8086:2579 (rev 2).
    Master Capable. Latency=64. Min Gnt=8.
    Bus 0, device 3, function 0:
    Class 0604: PCI device 8086:257b (rev 2).
    Master Capable. Latency=64. Min Gnt=2.
    Bus 0, device 29, function 0:
    Class 0c03: PCI device 8086:24d2 (rev 2).
    IRQ 16.
    I/O at 0xeec0 [0xeedf].
    Bus 0, device 29, function 1:
    Class 0c03: PCI device 8086:24d4 (rev 2).
    IRQ 19.
    I/O at 0xef00 [0xef1f].
    Bus 0, device 29, function 2:
    Class 0c03: PCI device 8086:24d7 (rev 2).
    IRQ 18.
    I/O at 0xef20 [0xef3f].
    Bus 0, device 29, function 3:
    Class 0c03: PCI device 8086:24de (rev 2).
    IRQ 16.
    I/O at 0xef40 [0xef5f].
    Bus 0, device 29, function 7:
    Class 0c03: PCI device 8086:24dd (rev 2).
    IRQ 23.
    Non-prefetchable 32 bit memory at 0xfebff800 [0xfebffbff].
    Bus 0, device 30, function 0:
    Class 0604: PCI device 8086:244e (rev 194).
    Master Capable. No bursts. Min Gnt=2.
    Bus 0, device 31, function 0:
    Class 0601: PCI device 8086:24d0 (rev 2).
    Bus 0, device 31, function 1:
    Class 0101: PCI device 8086:24db (rev 2).
    IRQ 18.
    I/O at 0xfc00 [0xfc0f].
    Non-prefetchable 32 bit memory at 0x40000000 [0x400003ff].
    Bus 0, device 31, function 2:
    Class 0101: PCI device 8086:24d1 (rev 2).
    IRQ 18.
    I/O at 0xefe0 [0xefe7].
    I/O at 0xefac [0xefaf].
    I/O at 0xefa0 [0xefa7].
    I/O at 0xefa8 [0xefab].
    I/O at 0xef90 [0xef9f].
    Bus 0, device 31, function 3:
    Class 0c05: PCI device 8086:24d3 (rev 2).
    IRQ 17.
    I/O at 0x400 [0x41f].
    Bus 1, device 0, function 0:
    Class 0300: PCI device 1002:4a49 (rev 0).
    IRQ 16.
    Master Capable. Latency=64. Min Gnt=8.
    Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
    I/O at 0xb000 [0xb0ff].
    Non-prefetchable 32 bit memory at 0xfe8f0000 [0xfe8fffff].
    Bus 1, device 0, function 1:
    Class 0380: PCI device 1002:4a69 (rev 0).
    Master Capable. Latency=64. Min Gnt=8.
    Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
    Non-prefetchable 32 bit memory at 0xfe8e0000 [0xfe8effff].
    Bus 2, device 1, function 0:
    Class 0200: PCI device 8086:1019 (rev 0).
    IRQ 18.
    Master Capable. No bursts. Min Gnt=255.
    Non-prefetchable 32 bit memory at 0xfe9e0000 [0xfe9fffff].
    I/O at 0xcf80 [0xcf9f].
    Bus 3, device 3, function 0:
    Class 0c00: PCI device 1106:3044 (rev 70).
    IRQ 20.
    Master Capable. Latency=64. Max Lat=32.
    Non-prefetchable 32 bit memory at 0xfeaff800 [0xfeafffff].
    I/O at 0xdc00 [0xdc7f].
    Bus 3, device 11, function 0:
    Class 0401: PCI device 1102:0002 (rev 7).
    IRQ 23.
    Master Capable. Latency=64. Min Gnt=2.Max Lat=20.
    I/O at 0xdf80 [0xdf9f].
    Bus 3, device 11, function 1:
    Class 0980: PCI device 1102:7002 (rev 7).
    Master Capable. Latency=64.
    I/O at 0xdfe0 [0xdfe7].
    Bus 3, device 12, function 0:
    Class 0280: PCI device 14e4:4320 (rev 3).
    IRQ 20.
    Master Capable. Latency=64.
    Non-prefetchable 32 bit memory at 0xfeafc000 [0xfeafdfff].

    $ cat /proc/bus/pci/devices
    0000 80862578 0 f8000008 00000000 00000000 00000000 00000000 00000000 00000000 04000000 00000000 00000000 00000000 00000000 00000000 00000000
    0008 80862579 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 PCI Bridge
    0018 8086257b 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 PCI Bridge
    00e8 808624d2 10 00000000 00000000 00000000 00000000 0000eec1 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    00e9 808624d4 13 00000000 00000000 00000000 00000000 0000ef01 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    00ea 808624d7 12 00000000 00000000 00000000 00000000 0000ef21 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    00eb 808624de 10 00000000 00000000 00000000 00000000 0000ef41 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    00ef 808624dd 17 febff800 00000000 00000000 00000000 00000000 00000000 00000000 00000400 00000000 00000000 00000000 00000000 00000000 00000000 ehci_hcd
    00f0 8086244e 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 PCI Bridge
    00f8 808624d0 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    00f9 808624db 12 00000000 00000000 00000000 00000000 0000fc01 40000000 00000000 00000000 00000000 00000000 00000000 00000010 00000400 00000000 PIIX IDE
    00fa 808624d1 12 0000efe1 0000efad 0000efa1 0000efa9 0000ef91 00000000 00000000 00000008 00000004 00000008 00000004 00000010 00000000 00000000 PIIX IDE
    00fb 808624d3 11 00000000 00000000 00000000 00000000 00000401 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000
    0100 10024a49 10 e8000008 0000b001 fe8f0000 00000000 00000000 00000000 fe8c0000 08000000 00000100 00010000 00000000 00000000 00000000 00020000
    0101 10024a69 0 e0000008 fe8e0000 00000000 00000000 00000000 00000000 00000000 08000000 00010000 00000000 00000000 00000000 00000000 00000000
    0208 80861019 12 fe9e0000 00000000 0000cf81 00000000 00000000 00000000 00000000 00020000 00000000 00000020 00000000 00000000 00000000 00000000 e1000
    0318 11063044 14 feaff800 0000dc01 00000000 00000000 00000000 00000000 00000000 00000800 00000080 00000000 00000000 00000000 00000000 00000000 ohci1394
    0358 11020002 17 0000df81 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 00000000 00000000 00000000 00000000
    0359 11027002 0 0000dfe1 00000000 00000000 00000000 00000000 00000000 00000000 00000008 00000000 00000000 00000000 00000000 00000000 00000000
    0360 14e44320 14 feafc000 00000000 00000000 00000000 00000000 00000000 00000000 00002000 00000000 00000000 00000000 00000000 00000000 00000000

    $ cat /proc/bus/usb/devices
    T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=ef40
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=ef20
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=ef00
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=eec0
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
    B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 2.04
    S: Manufacturer=Linux 2.4.32-acronis ehci_hcd
    S: Product=PCI device 8086:24dd
    S: SerialNumber=00:1d.7
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

    $ cat /proc/bus/ieee1394/devices
    Node[0-01:1023] GUID[00e01800005b39e3]:
    Vendor ID: `Linux OHCI-1394' [0x004063]
    Capabilities: 0x0083c0
    Bus Options:
    IRMC(1) CMC(1) ISC(1) BMC(0) PMC(0) GEN(0)
    LSPD(2) MAX_REC(204:cool: CYC_CLK_ACC(0)
    Host Node Status:
    Host Driver : ohci1394
    Nodes connected : 2
    Nodes active : 2
    SelfIDs received: 2
    Irm ID : [0-01:1023]
    BusMgr ID : [0-63:1023]
    In Bus Reset : no
    Root : yes
    Cycle Master : yes
    IRM : yes
    Bus Manager : no
    Node[0-00:1023] GUID[0090a95000026463]:
    Vendor ID: `WD ' [0x0090a9]
    Capabilities: 0x0083c0
    Bus Options:
    IRMC(0) CMC(0) ISC(0) BMC(0) PMC(0) GEN(0)
    LSPD(2) MAX_REC(204:cool: CYC_CLK_ACC(255)
    Unit Directory 0:
    Vendor/Model ID: WD [0090a9] / 1600JB External [000000]
    Software Specifier ID: 00609e
    Software Version: 010483
    Driver: SBP2 Driver
    Length (in quads): 7
    Unit Directory 1:
    Vendor/Model ID: WD [0090a9] / HID [000001]
    Software Specifier ID: 001101
    Software Version: 001430
    Length (in quads): 7

    $ cat /proc/partitions
    major minor #blocks name

    8 0 156290904 scsi/host0/bus0/target0/lun0/disc
    8 1 156288321 scsi/host0/bus0/target0/lun0/part1
    34 0 72613056 ide/host2/bus1/target0/lun0/disc
    34 1 72605736 ide/host2/bus1/target0/lun0/part1
    33 0 78150744 ide/host2/bus0/target0/lun0/disc
    33 1 78148161 ide/host2/bus0/target0/lun0/part1
    3 64 117220824 ide/host0/bus0/target1/lun0/disc
    3 65 113153796 ide/host0/bus0/target1/lun0/part1
    3 66 1 ide/host0/bus0/target1/lun0/part2
    3 69 4064413 ide/host0/bus0/target1/lun0/part5

    $ cat /proc/scsi/scsi
    Attached devices:
    Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: WD Model: 1600JB External Rev: 2.21
    Type: Direct-Access ANSI SCSI revision: 06
    Host: scsi1 Channel: 00 Id: 00 Lun: 00
    Vendor: Seagate Model: STT8000A Rev: 5.51
    Type: Sequential-Access ANSI SCSI revision: 02
    Host: scsi1 Channel: 00 Id: 01 Lun: 00
    Vendor: PLEXTOR Model: DVDR PX-708A Rev: 1.08
    Type: CD-ROM ANSI SCSI revision: 02
    $ dmesg
    <4>Linux version 2.4.32-acronis#1 SMP Tue Mar 21 14:12:35 MSK 2006
    <6>BIOS-provided physical RAM map:
    <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
    <4> BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
    <4> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
    <4> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
    <4> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
    <4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    <4>Warning only 896MB will be used.
    <4>Use a HIGHMEM enabled kernel.
    <5>896MB LOWMEM available.
    <4>found SMP MP-table at 000ff780
    <4>hm, page 000ff000 reserved twice.
    <4>hm, page 00100000 reserved twice.
    <4>hm, page 000f1000 reserved twice.
    <4>hm, page 000f2000 reserved twice.
    <4>On node 0 totalpages: 229376
    <4>zone(0): 4096 pages.
    <4>zone(1): 225280 pages.
    <4>zone(2): 0 pages.
    <6>DMI 2.3 present.
    <6>60 structures occupying 1920 bytes.
    <6>DMI table at 0x000F04B0.
    <4>BIOS Vendor: American Megatrends Inc.
    <4>BIOS Version: 1023.001
    <4>BIOS Release: 06/20/2005
    <4>System Vendor: To Be Filled By O.E.M.
    <4>Product Name: To Be Filled By O.E.M.
    <4>Version: To Be Filled By O.E.M.
    <4>Serial Number: To Be Filled By O.E.M.
    <4>Board Vendor: ASUSTeK Computer Inc.
    <4>Board Name: P4C800-E
    <4>Board Version: Rev 1.xx
    <6>ACPI: RSDP (v002 ACPIAM ) @ 0x000f9d90
    <6>ACPI: XSDT (v001 A M I OEMXSDT 0x06000520 MSFT 0x00000097) @ 0x3ff30100
    <6>ACPI: FADT (v003 A M I OEMFACP 0x06000520 MSFT 0x00000097) @ 0x3ff30290
    <6>ACPI: MADT (v001 A M I OEMAPIC 0x06000520 MSFT 0x00000097) @ 0x3ff30390
    <6>ACPI: OEMB (v001 A M I OEMBIOS 0x06000520 MSFT 0x00000097) @ 0x3ff40040
    <6>ACPI: DSDT (v001 P4CED P4CED106 0x00000106 INTL 0x02002026) @ 0x00000000
    <6>ACPI: Local APIC address 0xfee00000
    <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    <4>Processor #0 Unknown CPU [15:3] APIC version 20
    <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    <4>Processor #1 Unknown CPU [15:3] APIC version 20
    <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
    <6>IOAPIC[0]: Assigned apic_id 2
    <4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    <6>Using ACPI (MADT) for SMP configuration information
    <4>Kernel command line: MBRCRCS=4BE9A84F,FC509B1E,FC89B81B ramdisk_size=27668
    <6>Initializing CPU#0
    <4>Detected 3361.051 MHz processor.
    <4>Console: colour dummy device 80x25
    <4>Calibrating delay loop... 6710.88 BogoMIPS
    <6>Memory: 892316k/917504k available (1091k kernel code, 24800k reserved, 231k data, 120k init, 0k highmem)
    <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    <6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
    <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    <6>Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
    <4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
    <6>CPU: Trace cache: 12K uops, L1 D cache: 16K
    <6>CPU: L2 cache: 1024K
    <6>CPU: Physical Processor ID: 0
    <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
    <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
    <6>Enabling fast FPU save and restore... done.
    <6>Enabling unmasked SIMD FPU exception support... done.
    <6>Checking 'hlt' instruction... OK.
    <4>POSIX conformance testing by UNIFIX
    <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    <4>mtrr: detected mtrr type: Intel
    <6>CPU: Trace cache: 12K uops, L1 D cache: 16K
    <6>CPU: L2 cache: 1024K
    <6>CPU: Physical Processor ID: 0
    <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
    <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
    <4>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
    <4>per-CPU timeslice cutoff: 2925.51 usecs.
    <4>enabled ExtINT on CPU#0
    <4>ESR value before enabling vector: 00000000
    <4>ESR value after enabling vector: 00000000
    <4>Booting processor 1/1 eip 3000
    <6>Initializing CPU#1
    <4>masked ExtINT on CPU#1
    <4>ESR value before enabling vector: 00000000
    <4>ESR value after enabling vector: 00000000
    <4>Calibrating delay loop... 6710.88 BogoMIPS
    <6>CPU: Trace cache: 12K uops, L1 D cache: 16K
    <6>CPU: L2 cache: 1024K
    <6>CPU: Physical Processor ID: 0
    <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
    <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
    <4>CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
    <6>Total of 2 processors activated (13421.77 BogoMIPS).
    <4>cpu_sibling_map[0] = 1
    <4>cpu_sibling_map[1] = 0
    <4>ENABLING IO-APIC IRQs
    <7>init IO_APIC IRQs
    <7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
    <6>..TIMER: vector=0x31 pin1=2 pin2=-1
    <4>Using local APIC timer interrupts.
    <4>calibrating APIC timer ...
    <4>..... CPU clock speed is 3361.1288 MHz.
    <4>..... host bus clock speed is 240.0803 MHz.
    <4>cpu: 0, clocks: 2400803, slice: 800267
    <4>CPU0<T0:2400800,T1:1600528,D:5,S:800267,C:2400803>
    <4>cpu: 1, clocks: 2400803, slice: 800267
    <4>CPU1<T0:2400800,T1:800256,D:10,S:800267,C:2400803>
    <4>checking TSC synchronization across CPUs: passed.
    <4>Waiting on wait_init_idle (map = 0x2)
    <4>All processors have done init_idle
    <6>ACPI: Subsystem revision 20040326
    <6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
    <6>PCI: Using configuration type 1
    <6>ACPI: Interpreter enabled
    <6>ACPI: Using IOAPIC for interrupt routing
    <6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
    <6>ACPI: PCI Root Bridge [PCI0] (00:00)
    <4>PCI: Probing PCI hardware (bus 00)
    <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
    <4>Transparent bridge - PCI device 8086:244e
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    <6>PCI: Probing PCI hardware
    <7>00:00:01[A] -> 2-16 -> IRQ 16 level low
    <7>00:00:01 -> 2-17 -> IRQ 17 level low
    <7>00:00:1f[A] -> 2-18 -> IRQ 18 level low
    <7>00:00:1d -> 2-19 -> IRQ 19 level low
    <7>00:00:1d[D] -> 2-23 -> IRQ 23 level low
    <7>00:03:08[A] -> 2-20 -> IRQ 20 level low
    <7>00:03:09[A] -> 2-21 -> IRQ 21 level low
    <7>00:03:09 -> 2-22 -> IRQ 22 level low
    <7>number of MP IRQ sources: 15.
    <7>number of IO-APIC #2 registers: 24.
    <6>testing the IO APIC.......................
    <4>
    <7>IO APIC #2......
    <7>.... register #00: 02000000
    <7>....... : physical APIC id: 02
    <7>....... : Delivery Type: 0
    <7>....... : LTS : 0
    <7>.... register #01: 00178020
    <7>....... : max redirection entries: 0017
    <7>....... : PRQ implemented: 1
    <7>....... : IO APIC version: 0020
    <7>.... IRQ redirection table:
    <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    <7> 00 000 00 1 0 0 0 0 0 0 00
    <7> 01 003 03 0 0 0 0 0 1 1 39
    <7> 02 003 03 0 0 0 0 0 1 1 31
    <7> 03 003 03 0 0 0 0 0 1 1 41
    <7> 04 003 03 0 0 0 0 0 1 1 49
    <7> 05 003 03 0 0 0 0 0 1 1 51
    <7> 06 003 03 0 0 0 0 0 1 1 59
    <7> 07 003 03 0 0 0 0 0 1 1 61
    <7> 08 003 03 0 0 0 0 0 1 1 69
    <7> 09 003 03 0 1 0 0 0 1 1 71
    <7> 0a 003 03 0 0 0 0 0 1 1 79
    <7> 0b 003 03 0 0 0 0 0 1 1 81
    <7> 0c 003 03 0 0 0 0 0 1 1 89
    <7> 0d 003 03 0 0 0 0 0 1 1 91
    <7> 0e 003 03 0 0 0 0 0 1 1 99
    <7> 0f 003 03 0 0 0 0 0 1 1 A1
    <7> 10 003 03 1 1 0 1 0 1 1 A9
    <7> 11 003 03 1 1 0 1 0 1 1 B1
    <7> 12 003 03 1 1 0 1 0 1 1 B9
    <7> 13 003 03 1 1 0 1 0 1 1 C1
    <7> 14 003 03 1 1 0 1 0 1 1 D1
    <7> 15 003 03 1 1 0 1 0 1 1 D9
    <7> 16 003 03 1 1 0 1 0 1 1 E1
    <7> 17 003 03 1 1 0 1 0 1 1 C9
    <7>IRQ to pin mappings:
    <7>IRQ0 -> 0:2
    <7>IRQ1 -> 0:1
    <7>IRQ3 -> 0:3
    <7>IRQ4 -> 0:4
    <7>IRQ5 -> 0:5
    <7>IRQ6 -> 0:6
    <7>IRQ7 -> 0:7
    <7>IRQ8 -> 0:8
    <7>IRQ9 -> 0:9
    <7>IRQ10 -> 0:10
    <7>IRQ11 -> 0:11
    <7>IRQ12 -> 0:12
    <7>IRQ13 -> 0:13
    <7>IRQ14 -> 0:14
    <7>IRQ15 -> 0:15
    <7>IRQ16 -> 0:16
    <7>IRQ17 -> 0:17
    <7>IRQ18 -> 0:18
    <7>IRQ19 -> 0:19
    <7>IRQ20 -> 0:20
    <7>IRQ21 -> 0:21
    <7>IRQ22 -> 0:22
    <7>IRQ23 -> 0:23
    <6>.................................... done.
    <6>PCI: Using ACPI for IRQ routing
    <6>isapnp: Scanning for PnP cards...
    <6>isapnp: No Plug & Play device found
    <6>Linux NET4.0 for Linux 2.4
    <6>Based upon Swansea University Computer Society NET3.039
    <4>Initializing RT netlink socket
    <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
    <5>apm: overridden by ACPI.
    <4>Starting kswapd
    <6>devfs: v1.12c (2002081:cool: Richard Gooch (rgooch@atnf.csiro.au)
    <6>devfs: boot_options: 0x0
    <6>ACPI: Processor [CPU1] (supports C1)
    <6>ACPI: Processor [CPU2] (supports C1)
    <3>Loading, please wait...
    <6>vesafb: framebuffer at 0xe8000000, mapped to 0xf8809000, size 1875k
    <6>vesafb: mode is 800x600x16, linelength=1600, pages=16
    <6>vesafb: protected mode interface info at c000:a858
    <6>vesafb: scrolling: redraw
    <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
    <6>Looking for splash picture... no good signature found.
    <4>Console: switching to colour frame buffer device 100x37
    <6>fb0: VESA VGA frame buffer device
    <6>Serial driver version 5.05c (2001-07-0:cool: with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
    <6>ttyS0 at 0x03f8 (irq = 4) is a 16550A
    <6>ttyS1 at 0x02f8 (irq = 3) is a 16550A
    <4>RAMDISK driver initialized: 16 RAM disks of 27668K size 1024 blocksize
    <6>NET4: Linux TCP/IP 1.0 for NET4.0
    <6>IP Protocols: ICMP, UDP, TCP, IGMP
    <6>IP: routing cache hash table of 8192 buckets, 64Kbytes
    <6>TCP: Hash tables configured (established 262144 bind 65536)
    <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    <5>RAMDISK: Compressed image found at block 0
    <6>Freeing initrd memory: 13172k freed
    <4>VFS: Mounted root (romfs filesystem) readonly.
    <6>Freeing unused kernel memory: 120k freed
    <4>$ /bin/mount -t proc proc /proc
    <4>$ /bin/mount -t devfs devfs /devfs
    <4>$ /bin/insmod floppy
    <4>Using /lib/modules/floppy.o
    <6>inserting floppy driver for 2.4.32-acronis
    <6>Floppy drive(s): fd0 is 1.44M
    <6>FDC 0 is a post-1991 82077
    <4>$ /bin/insmod scsi_mod
    <4>Using /lib/modules/scsi_mod.o
    <6>SCSI subsystem driver Revision: 1.00
    <4>$ /bin/insmod sd_mod
    <4>Using /lib/modules/sd_mod.o
    <4>$ /bin/insmod cdrom
    <4>Using /lib/modules/cdrom.o
    <4>$ /bin/insmod sr_mod
    <4>Using /lib/modules/sr_mod.o
    <4>$ /bin/insmod st
    <4>st.o: no module by that name found
    <4>$ /bin/insmod sg
    <4>Using /lib/modules/sg.o
    <4>$ /bin/insmod fat
    <4>Using /lib/modules/fat.o
    <4>$ /bin/insmod vfat
    <4>Using /lib/modules/vfat.o
    <4>$ /bin/insmod ntfs
    <4>ntfs.o: no module by that name found
    <4>$ /bin/insmod isofs
    <4>Using /lib/modules/isofs.o
    <4>$ /bin/insmod udf
    <4>Using /lib/modules/udf.o
    <5>udf: registering filesystem
    <4>$ /bin/insmod nls_utf8
    <4>Using /lib/modules/nls_utf8.o
    <4>$ /bin/insmod pci_hotplug
    <4>Using /lib/modules/pci_hotplug.o
    <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    <4>$ /bin/insmod acpiphp
    <4>Using /lib/modules/acpiphp.o
    <6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
    <4>init_module: acpiphp
    <4>: No such device
    <4>$ /bin/insmod ide-core
    <4>Using /lib/modules/ide-core.o
    <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    <4>$ /bin/insmod piix
    <4>Using /lib/modules/piix.o
    <6>ICH5: IDE controller at PCI slot 00:1f.1
    <4>PCI: Enabling device 00:1f.1 (0005 -> 0007)
    <6>ICH5: chipset revision 2
    <6>ICH5: not 100% native mode: will probe irqs later
    <6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:DMA
    <6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
    <6>ICH5-SATA: IDE controller at PCI slot 00:1f.2
    <6>ICH5-SATA: chipset revision 2
    <6>ICH5-SATA: 100% native mode on irq 18
    <6> ide2: BM-DMA at 0xef90-0xef97, BIOS settings: hde:DMA, hdf:pio
    <6> ide3: BM-DMA at 0xef98-0xef9f, BIOS settings: hdg:DMA, hdh:pio
    <4>$ /bin/insmod ide-detect
    <4>Using /lib/modules/ide-detect.o
    <4>hdb: WDC WD1200JB-00DUA3, ATA DISK drive
    <4>blk: queue f8a58c48, I/O limit 4095Mb (mask 0xffffffff)
    <4>hdc: PLEXTOR DVDR PX-708A, ATAPI CD/DVD-ROM drive
    <4>hdd: Seagate STT8000A, ATAPI TAPE drive
    <4>hde: ST380013AS, ATA DISK drive
    <4>blk: queue f8a593d8, I/O limit 4095Mb (mask 0xffffffff)
    <4>hdg: WDC WD740GD-00FLA0, ATA DISK drive
    <6>hdh: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
    <6>hdh: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
    <4>blk: queue f8a59844, I/O limit 4095Mb (mask 0xffffffff)
    <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    <4>ide1 at 0x170-0x177,0x376 on irq 15
    <4>ide2 at 0xefe0-0xefe7,0xefae on irq 18
    <4>ide3 at 0xefa0-0xefa7,0xefaa on irq 18
    <4>$ /bin/insmod pcmcia_core
    <4>Using /lib/modules/pcmcia_core.o
    <6>Linux Kernel Card Services 3.1.22
    <6> options: [pci] [cardbus] [pm]
    <4>$ /bin/insmod i82365
    <4>Using /lib/modules/i82365.o
    <6>Intel ISA PCIC probe: not found.
    <4>init_module: i82365
    <4>: No such device
    <4>$ /bin/insmod ide-disk
    <4>Using /lib/modules/ide-disk.o
    <4>hdb: attached ide-disk driver.
    <4>hdb: host protected area => 1
    <6>hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100)
    <6>Partition check:
    <6> /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
    <4>hde: attached ide-disk driver.
    <4>hde: host protected area => 1
    <6>hde: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(100)
    <6> /dev/ide/host2/bus0/target0/lun0: p1
    <4>hdg: attached ide-disk driver.
    <4>hdg: host protected area => 1
    <6>hdg: 145226112 sectors (74356 MB) w/8192KiB Cache, CHS=9039/255/63, UDMA(100)
    <6> /dev/ide/host2/bus1/target0/lun0: p1
    <4>$ /bin/insmod ataraid
    <4>Using /lib/modules/ataraid.o
    <4>$ /bin/insmod iswraid
    <4>Using /lib/modules/iswraid.o
    <6>iswraid: Intel(tm) Software RAID driver Version 0.1.5
    <6>iswraid: Options: iswraid_halt_degraded=0, iswraid_resist_failing=1, iswraid_error_threshold=10
    <6>iswraid: Probed 0 SCSI disks, found 0 ISWRAID disks
    <4>init_module: iswraid
    <4>: No such device
    <4>$ /bin/insmod usbcore
    <4>Using /lib/modules/usbcore.o
    <6>usb.c: registered new driver usbdevfs
    <6>usb.c: registered new driver hub
    <4>$ /bin/insmod usb-ohci
    <4>Using /lib/modules/usb-ohci.o
    <4>init_module: usb-ohci
    <4>: No such device
    <4>$ /bin/insmod ehci-hcd
    <4>Using /lib/modules/ehci-hcd.o
    <7>PCI: Setting latency timer of device 00:1d.7 to 64
    <6>ehci_hcd 00:1d.7: PCI device 8086:24dd
    <6>ehci_hcd 00:1d.7: irq 23, pci mem f8a90800
    <6>usb.c: new USB bus registered, assigned bus number 1
    <6>ehci_hcd 00:1d.7: enabled 64bit PCI DMA
    <7>PCI: cache line size of 128 is not supported by device 00:1d.7
    <6>ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    <6>hub.c: USB hub found
    <6>hub.c: 8 ports detected
    <4>$ /bin/insmod usb-uhci
    <4>Using /lib/modules/usb-uhci.o
    <6>usb-uhci.c: $Revision: 1.275 $ time 16:04:55 Mar 24 2006
    <6>usb-uhci.c: High bandwidth mode enabled
    <7>PCI: Setting latency timer of device 00:1d.0 to 64
    <6>usb-uhci.c: USB UHCI at I/O 0xeec0, IRQ 16
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 2
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <7>PCI: Setting latency timer of device 00:1d.1 to 64
    <6>usb-uhci.c: USB UHCI at I/O 0xef00, IRQ 19
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 3
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <7>PCI: Setting latency timer of device 00:1d.2 to 64
    <6>usb-uhci.c: USB UHCI at I/O 0xef20, IRQ 18
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 4
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <7>PCI: Setting latency timer of device 00:1d.3 to 64
    <6>usb-uhci.c: USB UHCI at I/O 0xef40, IRQ 16
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 5
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    <4>$ /bin/insmod ieee1394
    <4>Using /lib/modules/ieee1394.o
    <4>$ /bin/insmod ohci1394
    <4>Using /lib/modules/ohci1394.o
    <6>ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
    <6>ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max Packet=[2048]
    <4>$ /bin/insmod e1000
    <4>Using /lib/modules/e1000.o
    <6>Intel(R) PRO/1000 Network Driver - version 6.3.9
    <6>Copyright (c) 1999-2005 Intel Corporation.
    <7>PCI: Setting latency timer of device 02:01.0 to 64
    <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800005b39e3]
    <6>e1000: 02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:a6:54:f5:06
    <6>hub.c: new USB device 00:1d.1-1, assigned address 2
    <4>usb.c: USB device 2 (vend/prod 0xd9f/0x1) is not claimed by any active driver.
    <6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    <4>Waiting for USB/IEEE1394 devices arrival...
    <3>ieee1394: ConfigROM quadlet transaction error for node 0-01:1023
    <7>ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
    <3>ieee1394: ConfigROM quadlet transaction error for node 0-00:1023
    <3>ieee1394: ConfigROM quadlet transaction error for node 0-01:1023
    <7>ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
    <7>ieee1394: NodeMgr: hotplug policy returned -2
    <7>ieee1394: NodeMgr: hotplug policy returned -2
    <7>ieee1394: Node added: ID:BUS[0-00:1023] GUID[0090a95000026463]
    <7>ieee1394: Node changed: 0-00:1023 -> 0-01:1023
    <4>$ /bin/mount -t usbdevfs usbdevfs /proc/bus/usb
    <4>usb_control/bulk_msg: timeout
    <4>usb_control/bulk_msg: timeout
    <4>usb_control/bulk_msg: timeout
    <6>usb.c: USB disconnect on device 00:1d.1-1 address 2
    <4>$ /bin/insmod sbp2
    <4>Using /lib/modules/sbp2.o
    <6>sbp2: $Rev: 1074 $ Ben Collins <bcollins@debian.org>
    <6>scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
    <4>ieee1394: sbp2: Node 0-00:1023: Using 36byte inquiry workaround
    <6>ieee1394: sbp2: Logged into SBP-2 device
    <4>ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
    <4> Vendor: WD Model: 1600JB External Rev: 2.21
    <4> Type: Direct-Access ANSI SCSI revision: 06
    <4>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    <4>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
    <6> /dev/scsi/host0/bus0/target0/lun0: p1
    <4>$ /bin/insmod ide-scsi
    <4>Using /lib/modules/ide-scsi.o
    <4>hdd: attached ide-scsi driver.
    <6>hdd: DMA disabled
    <4>hdc: attached ide-scsi driver.
    <6>hdc: DMA disabled
    <6>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
    <4> Vendor: Seagate Model: STT8000A Rev: 5.51
    <4> Type: Sequential-Access ANSI SCSI revision: 02
    <4> Vendor: PLEXTOR Model: DVDR PX-708A Rev: 1.08
    <4> Type: CD-ROM ANSI SCSI revision: 02
    <4>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 1, lun 0
    <4>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    <6>Uniform CD-ROM driver Revision: 3.12
    <4>Checking for graphic mode...
    <4>$ /bin/insmod input
    <4>Using /lib/modules/input.o
    <4>$ /bin/insmod mousedev
    <4>Using /lib/modules/mousedev.o
    <6>mice: PS/2 mouse device common for all mice
    <4>Detecting mouse...
    <4>$ /bin/gpm -R -m /devfs/input/mice -t imps2 -M -m /devfs/misc/psaux -t imps2
    <4>Checking for network adapter...
    <4>$ /bin/insmod af_packet
    <4>Using /lib/modules/af_packet.o
    <4>$ /bin/insmod smbfs
    <4>Using /lib/modules/smbfs.o
    <4>$ /bin/ifconfig lo 127.0.0.1
    <4>$ /bin/ifconfig lo up
    <4>$ /bin/insmod nls_cp850
    <4>Using /lib/modules/nls_cp850.o
    <4>$ /bin/insmod ext2
    <4>Using /lib/modules/ext2.o
    <4>$ /bin/insmod jbd
    <4>Using /lib/modules/jbd.o
    <6>Journalled Block Device driver loaded
    <4>$ /bin/insmod ext3
    <4>Using /lib/modules/ext3.o
    <4>$ /bin/insmod reiserfs
    <4>Using /lib/modules/reiserfs.o
    <4>$ /bin/insmod xfs
    <4>Using /lib/modules/xfs.o
    <6>SGI XFS with no debug enabled
    <4>$ /bin/insmod jfs
    <4>Using /lib/modules/jfs.o
    <4>$ /bin/insmod sunrpc
    <4>sunrpc.o: no module by that name found
    <4>$ /bin/insmod snapapi
    <4>Using /lib/modules/snapapi.o
    <6>snapapi_init: Snapapi(v.0.7.0) init OK. Session size 6700.
    <4>$ /bin/insmod md_mod
    <4>Using /lib/modules/md_mod.o
    <6>md: md driver 0.90.0, Adaptec md 0.1.0, MAX_MD_DEVS=256, MD_SB_DISKS=27
    <6>md: Autodetecting RAID arrays.
    <6>md: autorun ...
    <6>md: ... autorun DONE.
    <4>$ /bin/rm -rf /etc/codepage /etc/pcmcia
    <4>$ /bin/sh
    <4>/tmp/mntdir/mntdir
    <4>: No such file or directory

    $ lspci
    03:0c.0 14e4:4320 1737:0015 02:80:00
    03:0b.1 1102:7002 1102:0020 09:80:00
    03:0b.0 1102:0002 1102:8061 04:01:00
    03:03.0 1106:3044 1043:808a 0c:00:10 ohci1394
    02:01.0 8086:1019 1043:80f7 02:00:00 e1000
    01:00.1 1002:4a69 1002:0003 03:80:00
    01:00.0 1002:4a49 1002:0002 03:00:00
    00:1f.3 8086:24d3 1043:80a6 0c:05:00
    00:1f.2 8086:24d1 1043:80a6 01:01:8f piix [PIIX IDE]
    00:1f.1 8086:24db 1043:80a6 01:01:8a piix [PIIX IDE]
    00:1f.0 8086:24d0 0000:0000 06:01:00
    00:1e.0 8086:244e 0000:0000 06:04:00 [PCI Bridge]
    00:1d.7 8086:24dd 1043:80a6 0c:03:20 ehci-hcd [ehci_hcd]
    00:1d.3 8086:24de 1043:80a6 0c:03:00 usb-uhci
    00:1d.2 8086:24d7 1043:80a6 0c:03:00 usb-uhci
    00:1d.1 8086:24d4 1043:80a6 0c:03:00 usb-uhci
    00:1d.0 8086:24d2 1043:80a6 0c:03:00 usb-uhci
    00:03.0 8086:257b 0000:0000 06:04:00 [PCI Bridge]
    00:01.0 8086:2579 0000:0000 06:04:00 [PCI Bridge]
    00:00.0 8086:2578 1043:80f6 06:00:00
    Modules: ataraid ide-detect ide-disk pcmcia_core floppy ide-scsi sd_mod sg sr_mod sbp2 mousedev af_packet ext2 ext3 isofs jfs md_mod nls_cp850 nls_utf8 pci_hotplug reiserfs smbfs snapapi udf vfat xfs


    Thanks
     

    Attached Files:

  2. x=y+z

    x=y+z Registered Member

    Joined:
    Mar 19, 2006
    Posts:
    13
    Location:
    USA
    Try this:

    1) Turn the PC off (power down)
    2) Turn on the external firewire HD that has already been connected to the PC.
    3) Turn on the PC to start TI9 from the recovery CD.

    I found that if I turned on the PC before turning on the external firewire HD, TI9 would not see the drive in the recovery (Linux) environment.
     
  3. Acronis Support

    Acronis Support Acronis Support Staff

    Joined:
    Apr 28, 2004
    Posts:
    25,885
    Hello whscott,

    Thank you for choosing Acronis Disk Backup Software.

    We are very sorry for such a big delay with the response.

    I'm afraid that the issue with your external FireWire hard drive being not recognized in Acronis Rescue Mode requires a deeper investigation.

    Could you please submit a request for technical support containing the following files and information?

    - The exact vendor and model of your external FireWire hard drive;

    - Acronis Report created in the way described in Acronis Help Post;

    Please keep your external FireWire hard drive connected while creating Acronis Report;

    - Already collected Linux system information (sysinfo.txt file);

    - Step-by-step description of the actions taken before the problem appears.

    We will investigate the problem and try to provide you with the most suitable solution as soon as possible.

    Thank you.
    --
    Alexey Popov
     
Thread Status:
Not open for further replies.