Thanks for all data lose…

Discussion in 'Paragon Partition Manager Product Line' started by Joe090, Jun 18, 2012.

Thread Status:
Not open for further replies.
  1. Joe090

    Joe090 Registered Member

    Joined:
    Jun 18, 2012
    Posts:
    5
    Location:
    USA
    Before I use Paragon Hard Disk Manager 11 Server
    All below hard disk have data.

    C:\ OCZ SSD 120 GB (Boot hard disk)
    D:\ RAID0 Marvell 500 GB (D+E)
    E:\ RAID0 Marvell 500 GB (D+E)
    F:\ Split in two 500 GB - Western Digital 1 TB (F+G)
    G:\ Split in two 500 GB - Western Digital 1 TB (F+G)

    After I use Paragon Hard Disk Manager 11 Server

    C:\ OCZ SSD 120 GB (Boot hard disk)
    D:\ RAID0 Marvell 500 GB (D+E)
    E:\ RAID0 Marvell 500 GB (D+E)

    So I lose all data on F:\ and G:\ now.
    Your program writes:
    Basic GPT Hard Disk 1 (WDC WD1002FAEX-00Z3A0 ATA Device)
    (Unallocated)
    111.7 GB (Volume size 1 TB - 931.5 GB)

    Can I say I don’t like your program now?
    I try it not to lose data but to make backup.

    Thanks a lot to all my lose data!

    ----------
    Windows 7 Ultimate 64-bit (English)
     
  2. Joe090

    Joe090 Registered Member

    Joined:
    Jun 18, 2012
    Posts:
    5
    Location:
    USA
    To resolve the "error" (lost F:\ and G:\) I press on "Basic GPT..." (see below)

    *-*Begin-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
    Basic GPT Hard Disk 1 (WDC WD1002FAEX-00Z3A0 ATA Device)
    (Unallocated)
    111.7 GB (Volume size 1 TB - 931.5 GB)
    *-*End-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

    and ask to undelete the partition.
    After that and need to wait more or less one hour, I see another partition:

    *-*Begin-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
    Basic MBR Hard Disk 1 (WDC WD1002FAEX-00Z3A0 ATA Device)
    Name File System Volume Size
    Local Disk Invalid 512 Bytes
    (Unallocated) 931.5 GB
    *-*End-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

    After that I press on "Basic MBR..." (see above)
    and ask to undelete the partition.

    This time my both disk (1TB Hard Disk split in two 500GB each) F;\ and G:\
    was there and with all my data.

    I really don't know what happen but I lose nothing finally.

    So I think your product is great but they have just some "bugs".
     
  3. Joe090

    Joe090 Registered Member

    Joined:
    Jun 18, 2012
    Posts:
    5
    Location:
    USA
    Hum,

    Each time I reboot my hard disk F:\ and G:\ don't appear.
    I need to open "Disk Management" of Windows to activated them (give one letter).

    And if I reboot these letters disappear and I need to do that again.

    Somebody can help?

    I think some driver that "Hard Disk Manager 2011 Server" use, make Windows work bad.
     
  4. Joe090

    Joe090 Registered Member

    Joined:
    Jun 18, 2012
    Posts:
    5
    Location:
    USA
    After to install "Paragon Hard Disk Manager 2011 Server",Windows loses drive letter assigment on reboot.

    Now I need all time run "Disk Management" (from Windows) to choose letter F:\ and G:\ for one of my hard disk (split in two part of 500 GB).

    So I don't suggest to people to use "Paragon Hard Disk Manager 2011 Server" because it's clear it have a driver problem.
     
  5. Zacrux

    Zacrux Registered Member

    Joined:
    Aug 25, 2011
    Posts:
    6
    If you are assigning a drive letter in windows and the letters are not saving on reboot... this looks like a windows problem.
     
  6. Paragon_MA

    Paragon_MA Paragon Moderator

    Joined:
    Aug 17, 2009
    Posts:
    165
    Agree with the last. This more looks like windows problem. Please try to fix system registry with some advanced tools e.g CCleaner.
     
Thread Status:
Not open for further replies.