SSD monitering programs

Discussion in 'other software & services' started by trott3r, Jul 11, 2014.

Thread Status:
Not open for further replies.
  1. trott3r

    trott3r Registered Member

    Joined:
    Jan 21, 2010
    Posts:
    829
    Location:
    UK
    Hello,

    I have used hdsentinel for years on my hard drives with some success but i do not know how reliable it is for picking up failures on SSDs.

    Does anyone have experience with the program with SSDs?

    Or are there any recommendations for SSD health monitoring programs?
     
  2. mantra

    mantra Registered Member

    Joined:
    Jan 25, 2005
    Posts:
    5,120
    hi
    i will try hard disk sentinel , there is a portable version too
    i asked some question , they reply very quickly

    i quoted what they did answer , maybe could usefull for you

     
  3. trott3r

    trott3r Registered Member

    Joined:
    Jan 21, 2010
    Posts:
    829
    Location:
    UK
    Thanks for the reply.

    I cant see alignement when going through the details.
    Maybe they show it as an error if it wrong.
     
  4. mantra

    mantra Registered Member

    Joined:
    Jan 25, 2005
    Posts:
    5,120
  5. ratchet

    ratchet Registered Member

    Joined:
    Feb 20, 2006
    Posts:
    1,906
    Doesn't your manufacturer provide something? Here is what you get with Kingston and can't imagine what else one would need. Toward bottom is SMART READ DATA. Drive is over three years old.

    Code:
    Drive Name = [\\.\PHYSICALDRIVE1]
      Display Name = [Drive1]
      Drive Number = [1]
      Model Number = [KINGSTON SH100S3120G]
      WorldwideName = [00-26-b7 21c061662]
      Capacity = [120GB]
      Serial Number = [5xxx  ]
      Fw Revision = [503ABBF0]
      Config ID = [22756]
      Customer ID = []
      OEM ID = [Š]
      Drive Size = [120034123776] (111 GB)
    Raw Capacity (# of sectors) = [268435456]
    <IDENTIFY DEVICE DATA>
      Note:  All references are to ACS-2 Specification
      Legend:  F/V/X  - Fixed/variable/undefined Content
      (O)/(M)  - Mandatory/optional requirement
    Word  00: (M)  0c5ah  General configuration
      F  0b  15 0 = ATA device
      X  0001100b  14:8 Retired
      F  01b  7:6 Obsolete
      X  011b  5:3 Retired
      V  0b  2 Response incomplete
      X  1b  1 Retired
      0b  0 Reserved
    Word  01:  3fffh  Obsolete
    Word  02: (O)  c837h  Specific configuration
    Word  03: (X)  0010h  Obsolete
    Word  04: (X)  0000h 0000h  Retired
    Word  06: (X)  003fh  Obsolete
    Word  07:  0000h 0000h  Reserved for assignment by the CompactFlashTM Association
    Word  09: (X)  0000h  Retired
    Word  10: (M)  Serial number (20 ASCII characters)
      F  3530h xxxxx
    Word  20:  X  0000h 0000h  Retired
    Word  22:  X  0004h  Obsolete
    Word  23: (M)  Firmware revision (8 ASCII characters)
      F  3530h 3341h 4242h 4630h
      503ABBF0
    Word  27: (M)  Model number (40 ASCII characters)
      F  4b49h 4e47h 5354h 4f4eh 2053h 4831h 3030h 5333h 3132h 3047h
      2020h 2020h 2020h 2020h 2020h 2020h 2020h 2020h 2020h 2020h
      KINGSTON SH100S3120G
    Word  47: (M)  8010h
      F  15:8 80h
      F  7:0 00h  = Reserved
      01h-FFh = Maximum number of logical sectors that shall be transferred per DRQ data block on READ/WRITE MULTIPLE commands
    Word  48: (0)  4000h  Trusted Computing feature set options
      F  15 Shall be cleared to zero
      F  14 Shall be set to zero
      13:1 Reserved for the Trusted Computing Group
      F  0 1=Trusted Computing feature set is supported
    Word  49: (M)  2f00h  Capabilities
      F  15:14 Reserved for the IDENTIFY PACKET DEVICE command.
      F  1b  13 1 = Standby timer values as specified in this standard are supported
      0 = Standby timer values shall be managed by the device
      F  0b  12 Reserved for the IDENTIFY PACKET DEVICE command.
      F  1b  11 1 = IORDY supported
      0 = IORDY may be supported
      F  1b  10 1 = IORDY may be disabled
      F  1b  9 1 = LBA supported
      F  1b  8 1 = DMA supported
      X  00000000b  7:0 Retired
    Word  50: (M)  4000  Capabilities
      F  0b  15 Shall be cleared to zero.
      F  1b  14 Shall be set to one.
      F  000000000000b  13:2  Reserved.
      X  0b  1 Obsolete
      F  0b  0 Shall be set to one to indicate a device specific Standby timer value
    Word  51:  X  0200h 0200h  Obsolete
    Word  53: (M)  0007h
      F  0000000000000b  15:3  Reserved
      F  1b  2  1 = the fields reported in word 88 are valid
      0 = the fields reported in word 88 are not valid
      F  1b  1  1 = the fields reported in words (70:64) are valid
      0 = the fields reported in words (70:64) are not valid
      X  1b  0  Obsolete
    Word  54:  Obsolete
      X  3fffh 0010h 003fh fc10h
    Word  59: (M)  0110h
      F  0000000b  15:9 Reserved
      V  1b  8 1 = Multiple sector setting is valid
      V  10h  7:0 xxh = Current setting for number of logical sectors that shall be transferred per DRQ data block on READ/WRITE Multiple commands
    Word  60: (M)  4bb0h 0df9h  Total number of user addressable logical sectors (DWord)
    Word  62:  X  0000h  Obsolete
    Word  63: (M)  0007h
      F  00000b  15-11 Reserved
      V  0b  10 1 = Multiword DMA mode 2 is selected
      0 = Multiword DMA mode 2 is not selected
      V  0b  9 1 = Multiword DMA mode 1 is selected
      0 = Multiword DMA mode 1 is not selected
      V  0b  8 1 = Multiword DMA mode 0 is selected
      0 = Multiword DMA mode 0 is not selected
      F  00000b  7:3 Reserved
      F  1b  2 1 = Multiword DMA mode 2 and below are supported
      F  1b  1 1 = Multiword DMA mode 1 and below are supported
      F  1b  0 1 = Multiword DMA mode 0 is supported
    Word  64: (M)  0003h
      F  15:8  Reserved
      F  7:0  PIO modes supported
    Word  65: (M)  0078h  Minimum Multiword DMA transfer cycle time per word
      F  15:0  Cycle time in nanoseconds
    Word  66: (M)  0078h  Manufacturer's recommended Multiword DMA cycle time
      F  15:0  Cycle time in nanoseconds
    Word  67: (M)  0078h  Minimum PIO transfer cycle time without flow control
      F  15:0  Cycle time in nanoseconds
    Word  68: (M)  0078h  Minimum PIO transfer cycle time with IORDY flow control
      F  15:0  Cycle time in nanoseconds
    Word  69: (O)  4200h  Additional Supported
      F  0b  15 1 = CFast Specification Support
      F  1b  14 1 = Deterministic read after TRIM is supported
      F  0b  13 1 = Long Physical Sector Alignment Error Reporting Control is supported
      F  0b  12 1 = DEVICE CONFIGURATION IDENTIFY DMA and
      DEVICE CONFIGURATION SET DMA are supported
      F  0b  11 1 = READ BUFFER DMA is supported
      F  0b  10 1 = WRITE BUFFER DMA is supported
      F  1b  9 1 = SET MAX SET PASSWORD DMA and
      SET MAX UNLOCK DMA are supported
      F  0b  8 1 = DOWNLOAD MICROCODE DMA is supported
      F  00000000b  7:0 Reserved
    Word  70:  X  0000h  Reserved
    Word  71:  Reserved for IDENTIFY PACKET DEVICE command.
      0000h 0000h 0000h 0000h
    Word  75: (O)  001fh  Queue depth
      00000000000b  15:5 Reserved
      F  11111b  4:0 Maximum queue depth - 1
    Word  76: (O)  c70eh  Serial ATA capabilities
      110b  15:13 Reserved
      F  0b  12 Supports Native Command Queuing priority information
      F  0b  11 Supports Unload while NCQ commands outstanding
      F  1b  10 Supports Phy event counters
      F  1b  9 Supports receipt of host initiated power management requests
      F  1b  8 Supports native command queuing
      00001b  7:3 Reserved for Serial ATA
      F  1b  2 1 = Supports Serial ATA Gen-2 speed (3.0Gbps)
      F  1b  1 1 = Supports Serial ATA Gen-1 speed (1.5Gbps)
      F  0b  0 Shall be cleared to zero
    Word  77:  0006h  Reserved for Serial ATA future definition
    Word  78: (O)  004ch  Serial ATA features supported
      000000000b  15:7 Reserved
      F  1b  6 1 = supports software settings preservation
      F  0b  5 1 = supports Asynchronous notification
      F  0b  4 1 = supports in-order data delivery
      F  1b  3 1 = supports dev initiate interface power management
      F  1b  2 1 = supports DMA Setup Auto-Activate optimization
      F  0b  1 1 = supports non-zero buffer offsets in DMA Setup FIS
      F  0b  0 Reserved (set to 0)
    Word  79: (0)  0040h  Serial ATA features enabled
      000000000b  15:7 Reserved
      V  1b  6 1 = software settings preservation enabled
      V  0b  5 1 = Asynchronous notification enabled
      V  0b  4 1 = in-order data delivery enabled
      V  0b  3 1 = device initiating interface power management enabled
      V  0b  2 1 = DMA Setup Auto-Activate optimization enabled
      V  0b  1 1 = non-zero buffer offsets in DMA Setup FIS enabled
      F  0b  0 Reserved (set to 0)
    Word  80: (M)  01fch  Major version number
      0000h or FFFFh = device does not report version
      0000000b  15:9 Reserved
      F  1b  8 1 = supports ATA8-ACS
      F  1b  7 1 = supports ATA/ATAPI-7
      F  1b  6 1 = supports ATA/ATAPI-6
      F  1b  5 1 = supports ATA/ATAPI-5
      F  1b  4 1 = supports ATA/ATAPI-4
      X  1b  3 Obsolete
      X  1b  2 Obsolete
      X  0b  1 Obsolete
      0b  0 Reserved
    Word  81: (M)  0110h  Minor revision number
      F  0000h or FFFFh = device does not report version
      F  0001h-000Ch = Obsolete
      F  000Dh = ATA/ATAPI-4 X3T13 1153D revision 6
      F  000Eh = ATA/ATAPI-4 T13 1153D revision 13
      F  000Fh = ATA/ATAPI-4 X3T13 1153D revision 7
      F  0010h = ATA/ATAPI-4 T13 1153D revision 18
      F  0011h = ATA/ATAPI-4 T13 1153D revision 15
      F  0012h = ATA/ATAPI-4 published ANSI NCITS 317-1998
      F  0013h = ATA/ATAPI-5 T13 1321D revision 3
      F  0014h = ATA/ATAPI-4 T13 1153D revision 14
      F  0015h = ATA/ATAPI-5 T13 1321D revision 1
      F  0016h = ATA/ATAPI-5 published ANSI NCITS 340-2000
      F  0017h = ATA/ATAPI-4 T13 1153D revision 17
      F  0018h = ATA/ATAPI-6 T13 1410D revision 0
      F  0019h = ATA/ATAPI-6 T13 1410D revision 3a
      F  001Ah = ATA/ATAPI-7 T13 1532D revision 1
      F  001Bh = ATA/ATAPI-6 T13 1410D revision 2
      F  001Ch = ATA/ATAPI-6 T13 1410D revision 1
      001Dh Reserved
      F  001Eh = ATA/ATAPI-7 T13 1532D revision 0
      F  001Fh-0020h = Reserved
      F  0021h = ATA/ATAPI-7 T13 1532D revision 4a
      F  0022h = ATA/ATAPI-6 published, ANSI INCITS 361-2002
      F  0023h-FFFFh Reserved
    Word  82: (M)  746bh  Commands and feature sets supported
      X  0b  15 Obsolete
      F  1b  14 1 = NOP command supported
      F  1b  13 1 = READ BUFFER command supported
      F  1b  12 1 = WRITE BUFFER command supported
      X  0b  11 Obsolete
      F  1b  10 1 = Host Protected Area feature set supported
      F  0b  9 1 = DEVICE RESET command supported
      F  0b  8 1 = SERVICE interrupt supported
      F  0b  7 1 = release interrupt supported
      F  1b  6 1 = look-ahead supported
      F  1b  5 1 = write cache supported
      F  0b  4 Shall be cleared to zero to indicate that the PACKET feature set is not
      supported
      F  1b  3 1 = mandatory Power Management feature set supported
      F  0b  2 Obsolete
      F  1b  1 1 = Security Mode feature set supported
      F  1b  0 1 = SMART feature set supported
    Word  83: (M)  7469h  Commands and feature sets supported
      F  0b  15 Shall be cleared to zero
      F  1b  14 Shall be set to one
      F  1b  13 1 = FLUSH CACHE EXT command supported
      F  1b  12 1 = mandatory FLUSH CACHE command supported
      F  0b  11 1 = Device Configuration Overlay feature set supported
      F  1b  10 1 = 48-bit Address feature set supported
      F  0b  9 1 = Automatic Acoustic Management feature set supported
      F  0b  8 1 = SET MAX security extension supported
      F  0b  7 See Address Offset Reserved Area Boot NCITS TR27:2001
      F  1b  6 1 = SET FEATURES subcommand required to spin-up after power-up
      F  1b  5 1 = Power-Up In Standby features set supported
      X  0b  4 Obsolete
      F  1b  3 1 = Advanced Power Management feature set supported
      F  0b  2 1 = CFA feature set supported
      F  0b  1 1 = READ/WRITE DMA QUEUED supported
      F  1b  0 1 = DOWNLOAD MICROCODE command supported
    Word  84: (M)  6163h  Commands and feature sets supported
      F  0b  15 Shall be cleared to zero
      F  1b  14 Shall be set to one
      F  1b  13 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported
      F  0b  12 Reserved for technical report INCITS TR-37-2004 (TLC)
      F  0b  11 Reserved for technical report INCITS TR-37-2004 (TLC)
      X  00b  10:9 1 = Obsolete
      F  1b  8 1 = 64-bit Word wide name supported
      F  0b  7 1 = WRITE DMA QUEUEDFUA EXT command supported
      F  1b  6 1 = WRITE DMA FUA EXT and WRITE MULTI FUA EXT commands supported
      F  1b  5 1 = General Purpose Logging feature set supported
      F  0b  4 1 = Streaming feature set supported
      F  0b  3 1 = Media Card Pass Through Command feature set supported
      F  0b  2 1 = Media serial number supported
      F  1b  1 1 = SMART self-test supported
      F  1b  0 1 = SMART error logging supported
    Word  85: (M)  7429h  Commands and feature sets supported or enabled
      X  0b  15 Obsolete
      F  1b  14 1 = NOP command supported
      F  1b  13 1 = READ BUFFER command supported
      F  1b  12 1 = WRITE BUFFER command supported
      X  0b  11 Obsolete
      V  1b  10 1 = Host Protected Area feature set enabled
      F  0b  9 1 = DEVICE RESET command supported
      V  0b  8 1 = SERVICE interrupt enabled
      V  0b  7 1 = release interrupt enabled
      V  0b  6 1 = look-ahead enabled
      V  1b  5 1 = write cache enabled
      F  0b  4 Shall be cleared to zero to indicate that the PACKET feature set is not supported.
      F  1b  3 1 = Power Management feature set enabled
      X  0b  2 Obsolete
      V  0b  1 1 = Security Mode feature set enabled
      V  1b  0 1 = SMART feature set enabled
    Word  86: (M)  b449h  Commands and feature sets supported or enabled
      F  1b  15 1 = Words 120-119 are valid
      0b  14 1 = Reserved
      F  1b  13 1 = FLUSH CACHE EXT command supported
      F  1b  12 1 = FLUSH CACHE command supported
      F  0b  11 1 = DCO feature set is supported
      F  1b  10 1 = 48-bit Address features set supported
      V  0b  9 1 = Automatic Acoustic Management feature set enabled
      V  0b  8 1 = SET MAX security enabled by SET MAX SET PASSWORD
      0b  7 Reserved for address Offset Reserved Area Boot,INCITS TR27:2001
      F  1b  6 1 = SET FEATURES subcommand required to spin-up after power-up
      V  0b  5 1 = Power-Up In Standby features set enabled
      X  0b  4 Obsolete
      V  1b  3 1 = Advanced Power Management feature set enabled
      F  0b  2 1 = CFA feature set supported
      F  0b  1 1 = READ/WRITE DMA QUEUED command supported
      F  1b  0 1 = DOWNLOAD MICROCODE command supported
    Word  87: (M)  6163h  Commands and feature sets supported or enabled
      F  0b  15 Shall be cleared to zero
      F  0b  14 Shall be set to one
      F  0b  13 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported
      0b  12 Reserved for technical report- INCITS tr-37-2004 (TLC)
      0b  11 Reserved for technical report- INCITS TR-37-2004 (TLC)
      X  00b  10:9 Obsolete
      F  1b  8 1 = 64 bit Word wide name supported
      F  0b  7 1 = WRITE DMA QUEUED FUA EXT command supported
      F  1b  6 1 = WRITE DMA FUA EXT and WRITE MULTI FUA EXT commands
      supported
      F  1b  5 1 = General Purpose Logging feature set supported
      X  0b  4 Obsolete
      V  0b  3 1 = Media Card Pass Through Command feature set supported
      V  0b  2 1 = Media serial number is valid
      F  1b  1 1 = SMART self-test supported
      F  1b  0 1 = SMART error logging supported
    Word  88: (O)  207fh  Ultra DMA modes
      0b  15 Reserved
      V  0b  14 1 = Ultra DMA mode 6 is selected
      0 = Ultra DMA mode 6 is not selected
      V  1b  13 1 = Ultra DMA mode 5 is selected
      0 = Ultra DMA mode 5 is not selected
      V  0b  12 1 = Ultra DMA mode 4 is selected
      0 = Ultra DMA mode 4 is not selected
      V  0b  11 1 = Ultra DMA mode 3 is selected
      0 = Ultra DMA mode 3 is not selected
      V  0b  10 1 = Ultra DMA mode 2 is selected
      0 = Ultra DMA mode 2 is not selected
      V  0b  9 1 = Ultra DMA mode 1 is selected
      0 = Ultra DMA mode 1 is not selected
      V  0b  8 1 = Ultra DMA mode 0 is selected
      0 = Ultra DMA mode 0 is not selected
      0b  7 Reserved
      F  1b  6 1 = Ultra DMA mode 6 and below are supported
      F  1b  5 1 = Ultra DMA mode 5 and below are supported
      F  1b  4 1 = Ultra DMA mode 4 and below are supported
      F  1b  3 1 = Ultra DMA mode 3 and below are supported
      F  1b  2 1 = Ultra DMA mode 2 and below are supported
      F  1b  1 1 = Ultra DMA mode 1 and below are supported
      F  1b  0 1 = Ultra DMA mode 0 is supported
    Word  89: (O)  0001h  Time required for security erase unit completion
      00h  15:8 Reserved
      F  01h  7:0 Time required for Normal Erase mode SECUIRYT ERASE UNIT command
    Word  90: (O)  0000h  Time required for Enhanced security erase completion
      00h  15:8 Reserved
      F  00h  7:0 Time required for Enhanced Erase mode SECUIRYT ERASE UNIT command
    Word  91: (O)  00feh  Current APM level value (Advanced Power Management)
    Word  92: (O)  fffeh  Master Password Identifier
    Word  93: (M)  0000h  Hardware reset result. The contents of bits (12-0) of this world shall change only during the execution of a hardware reset (7.18.7.47)
      F  0b  15 Shall be cleared to zero.
      F  0b  14 Shall be set to one.
      V  0b  13 1 = dev detected CBLID- above ViHB
      0 = dev detected CBLID- below ViL
      V  00000b  12:8 Device 1 HW reset result. Device 0 shall clear these bits to 0.
      Device 1 shall set these bits as follows:
      12 Reserved.
      11 0 = Device 1 did not assert PDIAG-.
      1 = Device 1 asserted PDIAG-.
      V  00b  10:9 These bits indicate how Dev 1 determined device number:
      00 = Reserved.
      01 = a jumper was used.
      10 = the CSEL signal was used.
      11 = some other method was used or the method is unknown
      0b  8 Shall be set to one.
      7:0 Device 0 hardware reset result. Device 1  shall clear these bits to 0.
      Device 0 shall set these bits as follows:
      0b  7 Reserved.
      F  0b  6 0 = Device 0 not respond when Device 1 is selected.
      1 = Device 0 responds when Device 1 is selected.
      V  0b  5 0 = Device 0 did not detect assertion of DASP-.
      1 = Device 0 detected assertion of DASP-.
      V  0b  4 0 = Device 0 did not detect assertion of PDIAG-.
      1 = Device 0 detected assertion of PDIAG-.
      V  0b  3 0 = Device 0 failed diagnostics.
      1 = Device 0 passed diagnostics.
      V  00b  2:1 These bits indicate how Device 0 determined device number:
      00 = Reserved.
      01 = a jumper was used.
      10 = the CSEL signal was used.
      11 = some other method was used or the method unknown.
      F  0b  0 Shall be set to one.
    Word  94: (O)  0000h  Current AAM value (see 7.18.7.4:cool:
      F  00h  15:8 Vendor's recommended acoustic management value.
      V  00h  7:0 Current automatic acoustic management value.
    Word  95: (O)  0000h  Stream Minimum Request Size
    Word  96: (O)  0000h  Streaming Transfer Time - DMA
    Word  97: (O)  0000h  Streaming Access Latency - DMA and PIO
    Word  98: (O)  0000h 0000h  Streaming Performance Granularity (DWord)
    Word 100: (O)  Total Number of User Addressable Logical Sectors for 48-bit commands (QWord)
      V  b90c32f0h  0111h  18fc30h  18f5c4h
    Word 104: (O)  0000h  Streaming Transfer Time - PIO (see 7.18.7.54)
    Word 105:  0001h  Reserved
    Word 106: (O)  4000h  Physical sector size / Logical Sector Size
      F  0b  15 Shall be cleared to zero
      F  1b  14 Shall be set to one
      F  0b  13 1 = Device has multiple logical sectors per physical sector.
      F  0b  12 1 = Device Logical Sector Longer than 256 Words
      00000000b  11:4 Reserved
      F  0000b  3:0 2^x logical sectors per physical sector
    Word 107: (O)  0000h  Inter-seek delay for ISO-7779 standard acoustic testing in microseconds
    Word 108: (M)  World wide name
      F  00-26-b7 21c061662  IeeeOUI-UniqueID
    Word 112: (O)  Reserved for 128 bit world wide name extension to 128 bits
      0000h  0000h  0000h  0000h
    Word 116: (O)  0000h  Reserved for INCITS TR-37-2004
    Word 117: (O)  0000h 0000h  Logical sector size (DWord) (see 7.18.7.61)
    Word 119: (M)  401ah  Commands and feature sets supported (Continued from words 82..84)
      F  0b  15 Shall be cleared to zero
      F  1b  14 Shall be set to one
      00000000b  13:6 Reserved
      F  0b  5 1 = The Free-fall Control feature set is supported
      F  1b  4 1 = The DOWNLOAD MICROCODE command with mode 3 is supported
      F  1b  3 1 = The READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported
      F  0b  2 1 = The WRITE UNCORRECTABLE EXT command is supported
      F  1b  1 1 = The Write-Read-Verify feature set is supported
      0b  0  Reserved for DDT
    Word 120: (M)  4018h  Commands and feature sets supported or enabled (Continued from words 85..87)
      F  0b  15 Shall be cleared to zero
      F  1b  14 Shall be set to one
      00000000b  13:7 Reserved
      V  0b  6 1 = Extended Status Reporting feature set is supported
      V  0b  5 1 = The Free-fall Control feature set is enabled
      F  1b  4 1 = The DOWNLOAD MICROCODE command with mode 3 is supported
      F  1b  3 1 = The READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported
      F  0b  2 1 = The WRITE UNCORRECTABLE EXT command is supported
      V  0b  1 1 = The Write-Read-Verify feature set is enabled
      0b  0 Reserved for DDT
    Word 121:  Reserved for expanded supported and enable settings
      0000h 0000h 0000h 0000h 0000h 0000h
    Word 127:  0000h  Obsolete
    Word 128: (O)  0009h  Security status
      0000000b  15:9 Reserved
      V  0b  8 Master Password Capability 0 = High, 1 = Maximum
      00b  7:6 Reserved
      F  0b  5 1 = Enhanced security erase supported
      V  0b  4 1 = Security count expired
      V  1b  3 1 = Security frozen
      V  0b  2 1 = Security locked
      V  0b  1 1 = Security enabled
      F  1b  0 1 = Security supported
    Word 129:  Vendor specific
      0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
      0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
      0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
      0000h 0000h 0000h 0000h 0000h 0000h 0000h
    Word 160: (O)  0000h  CFA power mode (see 7.18.7.6:cool:
      F  0b  15 Word 160 supported
      0b  14 Reserved
      F  0b  13 CFA power mode 1 is required for one or more commands
      implemented by the device
      V  0b  12 CFA power mode 1 disabled
      F  000000000000b  11:0 Maximum current in ma
    Word 161:  Reserved for the CompactFlashTM Association
      0000h 0000h 0000h 0000h 0000h 0000h 0000h
    Word 168: (O)  0000h  See 7.18.7.70
      000000000000b  15:4 Reserved
      F  0000b  3:0 Device Nomimal Form Factor
    Word 169: (O)  0001h  DATA SET MANAGEMENT is supported (see 7.18.7.71)
      000000000000000b  15:1 Reserved
      F  1b  0 1 = th Trim bit in the DATA SET MANAGEMENT is supported
    Word 170: (O)  Addtional Product Identify (ATA String) (see 7.18.7.72)
      0000h 0000h 0000h 0000h
    Word 174:  0000h 0000h  Reserved
    Word 176: (O)  Current media serial number (60 ASCII characters)
      0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
      0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
      0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
      0000h 0000h 0000h 0000h 0000h 0000h
    Word 206: (O)  0021h  SCT Command Transport
      X  0000b  15:12 Vender Specific
      000000b  11:6 Reserved
      F  1b  5 SCT Command Transport Data Tables support
      F  0b  4 SCT Command Transport Features Control supported
      F  0b  3 SCT Command Transport Error Recovery control supported
      F  0b  2 SCT Command Transport Write Same supported
      F  0b  1 SCT Command Transport Long Sector Access supported
      F  1b  0 SCT Command Transport supported
    Word 207:  0000h 0000h  Reserved for CE-ATA
    Word 209: (O)  4000h  Alignment of logical blocks within a larger physical block
      0b  15 Shall be cleared to zero
      1b  14 Shall be set to one
      00000000000000b  13:0 Logical sector offset within the first physical sector where the first logical sector is placed
    Word 210: (O)  0000h 0000h  Write-Read-Verify Sector Count Mode 3 Only (DWord)
    Word 212: (O)  0100h 0000h  Write-Read-Verify Sector Count Mode 2 Only (DWord)
    Word 214: (O)  0000h  NV Cache Capabilities
      F  0000b  15:12 NV Cache feature set version
      F  0000b  11:8 NV Cache Power Mode feature set version
      000b  7:5 Reserved
      V  0b  4 1 = NV Cache feature set enabled
      00b  3:2 Reserved
      V  0b  1 1 = NV Cache Power Mode feature set enabled
      F  0b  0 1 = NV Cache Power Mode feature set supported
    Word 215: (O)  0000h  NV Cache Size in Logical Blocks (DWord)
    Word 217: (M)  0001h  Nominal media rotation rate
    Word 218:  0000h  Reserved
    Word 219: (O)  0000h  NV Cache Options
      15:8 Reserved
      F  00h  7:0 Device Estimated Time to Spin Up in Seconds
    Word 220: (O)  0000h  See 7.18.7.84
      15:8 Reserved
      V  00h  7:0 Write-Read-Verify feature set current mode
    Word 221:  0000h  Reserved
    Word 222: (M)  103fh  Transport Major revision number. 0000h or FFFFh = device does not report version
      F  0001b  15:12 Transport Type - 0 = Parallel, 1 = Serial, 2-Fh = Reserved
      00000011b  11:4 Reserved  Reserved
      F  1b  3 Reserved  SATA Rev 2.5
      F  1b  2 Reserved  SATA II: Extensions
      F  1b  1 ATA/ATAPI-7  SATA 1.0a
      F  1b  0 ATA8-APT  ATA8-AST
    Word 223: (M)  0000h  Transport Minor revision number
    Word 224:  Reserved for CE-ATA
      0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
      0000h 0000h
    Word 234: (O)  0000h  Minimum number of 512 byte units per DOWNLOAD MICROCODE command mode 03h
    Word 235: (O)  0000h  Maximum number of 512 byte units per DOWNLOAD MICROCODE command mode 03h
    Word 236:  Reserved
      0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
      0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
      0000h 0000h 0000h
    Word 255: (M)  86a5h  Integrity word
      86h  15:8 Checksum
      a5h  7:0 Signature
      SMART READ DATA
       Revision: 10
       Attributes List
        1: (SSD Raw Read Error Rate)  Normalized Rate: 120  Sectors Read: 0 Read Errors: 0
        5: (SSD Retired Block Count)  Spare blocks remaining 100%  Retired Block 0
        9: (SSD Power-On Hours)  Value 0  Total 8242 hrs 52 mins
        12: (SSD Power Cycle Count)  Power Cycle Life Remaining 100%  Number of power cycles 269
       171: (SSD Program Fail Count)  Program Error Count 0
       172: (SSD Erase Fail Count)  Erase Error Count 0
       174: (SSD Unexpected power loss count)  Unexpected power loss Count 203
       177: (Wear Range Delta)  Wear Range Delta 1%
       181: (Program Fail Count)  Program Error Count 0
       182: (Erase Fail Count)  Erase Error Count 0
       187: (SSD Reported Uncorrectable Errors)  Normalized Value 100  lifetime URAISE Errors 0
       194: (SSD Temperature Monitoring)  Normalized temp 23  Current 23  High 32 Low 16
       195: (SSD ECC On-the-fly Count)  Normalized Value 100  Sectors Read 0  UECC Count 0
       196: (SSD Reallocation Event Count)  Normalized Value 100  Reallocation Event Count 0
       201: (SSD Uncorrectable Soft Read Error Rate)Normalized Value 100  Sectors Read 0  Uncorrectable Soft Error Count 0
       204: (SSD Soft ECC Correction Rate (RAISE)  Normalized Value 100  Sectors Read 0  Soft ECC Correction Count 0
       230: (SSD Life Curve Status)  Normalized Value 100
       231: (SSD Life Left)  Life Remaining 100%
       233: (SSD Internal Reserved)  7014
       234: (SSD Internal Reserved)  6968
       241: (SSD Lifetime writes from host)  lifetime writes  6968
       242: (SSD Lifetime reads from host)  lifetime reads  19198
    ~ Edited Post Size, Enclosing Data in Code - JRViejo ~
     
    Last edited by a moderator: Jul 12, 2014
  6. trott3r

    trott3r Registered Member

    Joined:
    Jan 21, 2010
    Posts:
    829
    Location:
    UK
  7. trott3r

    trott3r Registered Member

    Joined:
    Jan 21, 2010
    Posts:
    829
    Location:
    UK
    Sadly Verbatim and Crucial did not supply any manufacturer disk health tools.
    I did check their websites and still nothing :(
     
  8. FanJ

    FanJ Updates Team

    Joined:
    Feb 9, 2002
    Posts:
    2,564
    I do not want to hijack this thread, so please forgive me, but is there a tool like that for a Samsung Pro SSD? Thanks in advance.
     
  9. Romagnolo1973

    Romagnolo1973 Registered Member

    Joined:
    Feb 17, 2009
    Posts:
    518
    Location:
    Italy - Ravenna
  10. Victek

    Victek Registered Member

    Joined:
    Nov 30, 2007
    Posts:
    5,121
    Location:
    USA
    To confirm alignment and trim try AS SSD Benchmark. For SMART and temperature monitoring I also use Crystal Disk Info which seems to work just fine.
     
  11. FanJ

    FanJ Updates Team

    Joined:
    Feb 9, 2002
    Posts:
    2,564
    Wow, thank you Romagnolo1973 !
    I thought the shop had installed things, but after your post I discovered that there is indeed that CD in one of those boxes (ough) with that Samsung Magician software. Ohh, bloody shame on me!! (more to learn and discover for me ...). Thanks!
     
  12. siljaline

    siljaline Former Poster

    Joined:
    Jun 29, 2003
    Posts:
    6,619
    Always go through all the CD's that were provided with the PC, in the event that something wasn't installed as staff sometimes only choose a bare minimum or what the build spec sheet indicated in order to ship the PC as serviceable.
     
  13. ratchet

    ratchet Registered Member

    Joined:
    Feb 20, 2006
    Posts:
    1,906
    I'd remembered that I saved this link. It may be helpful!
     
  14. mantra

    mantra Registered Member

    Joined:
    Jan 25, 2005
    Posts:
    5,120
    yes @ratchet
    it's a good link!
    but there is trick to use parted magic to secure-erase the drive , i don't think it's really a good idea ..
    thanks
     
    Last edited: Jul 15, 2014
Loading...
Thread Status:
Not open for further replies.