restore via lan from formated/new hd using restore disk

Discussion in 'Acronis True Image Product Line' started by softy783, Jul 10, 2005.

Thread Status:
Not open for further replies.
  1. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    Acronis_True_Image_ Enterprise_Server_v8.0_b1,158
    os: winXPpro

    i enabled dhcp and dns on the server where the client image is stored.

    somehow based on your response i sense you did not understand my question.

    i have made a restore disk on the server
    i am inserting the restore disk into a formatted drive on a client machine.
    no windows installed therefore can not enable dhcp/dns server there.
    when restore wizard is displayed choices are floppy,rom drive,computers near me,storage servers
    clicking computers near displayes no computerso_Oo_Oo_O
    choosing options and change setup to a manual ip does also not display any computers

    again with ghost 2003 i would use my mapping floppy to log on to the server!!!!!

    what are you using to find the server,

    From: Acronis Support Department <support@acronis.com>
    Subject: [Acronis #305959] Remote image restoring
    Date: Sun, 10 Jul 2005 12:36:47 +0400

    Hello,

    Thank you for taking the time to contact us.

    First of all please make sure that you have DHCP server on your network up and running. Please also try to specify the UNC path or type in IP manually.

    We are looking forward to hearing back from you at your earliest convenience.

    Thank you.
    --
    Best regards,
    Max Malushko

    Acronis, Inc.
    395 Oyster Point Blvd., Suite 213
    South San Francisco, CA 94080 USA
    http://www.acronis.com/

    Acronis support department
    e-mail: support@acronis.com

    > Sun Jul 10 10:38:13 2005]:
    >
    > as a ghost user i would insert my mapping disk
    >
    > my network requires explicit logon authentication it will never reveal what
    > pc users are on the lan unless you have the pc logon name and do a
    > search as such ghost handles this via mapping disk in dos
    for the $1000.00 you asking for your app you should not even have this issue.
    >
    > so what is the solution .........i am experiencing the exact problem
    > below
    >
    >
    >
    >
    > I ran Acronis True Image Enterprise Server from a bootable disk to
    > restore a
    > partition (disk) from an image located on the network drive, but
    > couldnÂ’t
    > find the necessary computer.
    > If thereÂ’s at least one computer shown in the Network Neighborhood,
    > try to
    > access the required computer by typing its address in the Filename
    > line like
    > \\computer\folder.
    > If thereÂ’s no Network icon in the My Computer, it means either network
    > problems, or wrong drivers that Acronis True Image Enterprise Server
    > tries
    > to use. Contact our technical support (support@acronis.com) and
    > provide all
    > network adapter specifications and manufacturerÂ’s name.
    > I ran Acronis True Image Enterprise Server
    >
     
  2. Acronis Support

    Acronis Support Acronis Support Staff

    Joined:
    Apr 28, 2004
    Posts:
    25,885
    Hello softy783,

    Thank you for choosing Acronis Enterprise Disk Backup Software.

    Could you please boot your computer from the Acronis True Image rescue disc and press F11 key when the "Starting Acronis Loader..." message appears? After you get the "Linux Kernel Settings" prompt, please remove the "quiet" word, click on the "OK" button and wait for # prompt to appear. Please insert a diskette into a floppy disk drive and issue the following commands:

    asamba dhcp -n
    asamba masters

    Send us the output after each of the commands;

    cd tmp
    mkdir mntdir
    mount /devfs/floppy/0 mntdir
    cat /proc/net/dev > mntdir/net.txt
    umount mntdir

    Send the net.txt file from the diskette to support@acronis.com along with the link to this thread, also please create sysinfo.txt file (please see Acronis post for the detailed instructions) and send to us.

    Thank you.
    --
    Irina Shirokova
     
  3. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    when i clicked on "ok" prompt it produced acronis true image selction screen with three options

    full version safe version windows
    as per your instruction i waited at this window for the # prompt for two days

    please be very specific in your instruction...you can assume that i have never
    heard of the internet or know what a pc is

    please keep this in mind when giving explicit direction on how to do something!!!

    i took a wild guess and clicked on full version for kicks which brought me to the / # local, inserted commands from above , but nothing copied to floppy on a drive so here we are , going this rate i think i will need a demo extension encompassing 365 days, 14 days demo period at this rate will be gone soon.
     
  4. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    net.txt file produced this

    Inter-| Receive | Transmit
    face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
    lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    eth0: 2290 10 0 0 0 0 0 0 722 3 0 0 0 0 0 0
     
  5. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    sysinfo file produced this


    $ cat /proc/version
    Linux version 2.4.30-acronis#1 SMP Sat May 7 18:11:52 MSD 2005

    $ cat /proc/cmdline
    MBRCRCS=0AD8AB14,2058A7A8 ramdisk_size=18118

    $ cat /proc/interrupts
    CPU0
    0: 124169 IO-APIC-edge timer
    1: 685 IO-APIC-edge keyboard
    6: 17 IO-APIC-edge floppy
    9: 0 IO-APIC-level acpi
    12: 259 IO-APIC-edge PS/2 Mouse
    14: 10 IO-APIC-edge ide0
    15: 14 IO-APIC-edge ide1
    16: 20 IO-APIC-level usb-uhci, usb-uhci
    18: 0 IO-APIC-level usb-uhci
    19: 6 IO-APIC-level usb-uhci
    22: 951 IO-APIC-level eth0
    23: 0 IO-APIC-level ehci_hcd
    NMI: 0
    LOC: 124116
    ERR: 0
    MIS: 0

    $ cat /proc/modules
    nls_cp850 3400 2
    smbfs 39160 0 (unused)
    af_packet 9036 3
    ide-scsi 8992 0
    ehci-hcd 17060 0 (unused)
    usb-uhci 21580 0 (unused)
    usbcore 57420 1 [ehci-hcd usb-uhci]
    sk98lin 161296 1
    ataraid 6052 0
    ide-disk 13544 0
    ide-detect 144 0 (unused)
    piix 8224 1
    ide-core 96116 0 [ide-scsi ide-disk ide-detect piix]
    pci_hotplug 14924 0
    nls_utf8 544 0 (unused)
    udf 82016 0 (unused)
    isofs 17588 0 (unused)
    vfat 9464 1
    fat 30168 0 [vfat]
    sg 26112 0 (unused)
    st 27336 0 (unused)
    sr_mod 13372 0 (unused)
    cdrom 25952 0 [sr_mod]
    sd_mod 10204 0 (unused)
    scsi_mod 55000 5 [ide-scsi sg st sr_mod sd_mod]
    floppy 47640 2

    $ cat /proc/pci
    PCI devices found:
    Bus 0, device 0, function 0:
    Class 0600: PCI device 8086:2570 (rev 2).
    Prefetchable 32 bit memory at 0xfc000000 [0xfdffffff].
    Bus 0, device 1, function 0:
    Class 0604: PCI device 8086:2571 (rev 2).
    Master Capable. Latency=64. Min Gnt=8.
    Bus 0, device 29, function 0:
    Class 0c03: PCI device 8086:24d2 (rev 2).
    IRQ 16.
    I/O at 0xeec0 [0xeedf].
    Bus 0, device 29, function 1:
    Class 0c03: PCI device 8086:24d4 (rev 2).
    IRQ 19.
    I/O at 0xef00 [0xef1f].
    Bus 0, device 29, function 2:
    Class 0c03: PCI device 8086:24d7 (rev 2).
    IRQ 18.
    I/O at 0xef20 [0xef3f].
    Bus 0, device 29, function 3:
    Class 0c03: PCI device 8086:24de (rev 2).
    IRQ 16.
    I/O at 0xef40 [0xef5f].
    Bus 0, device 29, function 7:
    Class 0c03: PCI device 8086:24dd (rev 2).
    IRQ 23.
    Non-prefetchable 32 bit memory at 0xfebff800 [0xfebffbff].
    Bus 0, device 30, function 0:
    Class 0604: PCI device 8086:244e (rev 194).
    Master Capable. No bursts. Min Gnt=2.
    Bus 0, device 31, function 0:
    Class 0601: PCI device 8086:24d0 (rev 2).
    Bus 0, device 31, function 1:
    Class 0101: PCI device 8086:24db (rev 2).
    IRQ 18.
    I/O at 0xfc00 [0xfc0f].
    Non-prefetchable 32 bit memory at 0x30000000 [0x300003ff].
    Bus 0, device 31, function 3:
    Class 0c05: PCI device 8086:24d3 (rev 2).
    IRQ 17.
    I/O at 0x400 [0x41f].
    Bus 0, device 31, function 5:
    Class 0401: PCI device 8086:24d5 (rev 2).
    IRQ 17.
    I/O at 0xe800 [0xe8ff].
    I/O at 0xee80 [0xeebf].
    Non-prefetchable 32 bit memory at 0xfebff400 [0xfebff5ff].
    Non-prefetchable 32 bit memory at 0xfebff000 [0xfebff0ff].
    Bus 1, device 0, function 0:
    Class 0300: PCI device 1002:5964 (rev 1).
    IRQ 16.
    Master Capable. Latency=64. Min Gnt=8.
    Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff].
    I/O at 0xc000 [0xc0ff].
    Non-prefetchable 32 bit memory at 0xfe9f0000 [0xfe9fffff].
    Bus 2, device 5, function 0:
    Class 0200: PCI device 11ab:4320 (rev 19).
    IRQ 22.
    Master Capable. Latency=64. Min Gnt=23.Max Lat=31.
    Non-prefetchable 32 bit memory at 0xfeafc000 [0xfeafffff].
    I/O at 0xd800 [0xd8ff].
    Bus 2, device 13, function 0:
    Class 0780: PCI device 14f1:1059 (rev :cool:.
    IRQ 21.
    Master Capable. Latency=64.
    Non-prefetchable 32 bit memory at 0xfeae0000 [0xfeaeffff].
    I/O at 0xdff0 [0xdff7].

    $ cat /proc/bus/pci/devices
    0000 80862570 0 fc000008 00000000 00000000 00000000 00000000 00000000 00000000 02000000 00000000 00000000 00000000 00000000 00000000 00000000
    0008 80862571 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 PCI Bridge
    00e8 808624d2 10 00000000 00000000 00000000 00000000 0000eec1 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    00e9 808624d4 13 00000000 00000000 00000000 00000000 0000ef01 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    00ea 808624d7 12 00000000 00000000 00000000 00000000 0000ef21 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    00eb 808624de 10 00000000 00000000 00000000 00000000 0000ef41 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    00ef 808624dd 17 febff800 00000000 00000000 00000000 00000000 00000000 00000000 00000400 00000000 00000000 00000000 00000000 00000000 00000000 ehci_hcd
    00f0 8086244e 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 PCI Bridge
    00f8 808624d0 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    00f9 808624db 12 00000000 00000000 00000000 00000000 0000fc01 30000000 00000000 00000000 00000000 00000000 00000000 00000010 00000400 00000000 PIIX IDE
    00fb 808624d3 11 00000000 00000000 00000000 00000000 00000401 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000
    00fd 808624d5 11 0000e801 0000ee81 febff400 febff000 00000000 00000000 00000000 00000100 00000040 00000200 00000100 00000000 00000000 00000000
    0100 10025964 10 f0000008 0000c001 fe9f0000 00000000 00000000 00000000 fe9c0000 08000000 00000100 00010000 00000000 00000000 00000000 00020000
    0228 11ab4320 16 feafc000 0000d801 00000000 00000000 00000000 00000000 feac0000 00004000 00000100 00000000 00000000 00000000 00000000 00020000 sk98lin
    0268 14f11059 15 feae0000 0000dff1 00000000 00000000 00000000 00000000 00000000 00010000 00000008 00000000 00000000 00000000 00000000 00000000

    $ cat /proc/bus/usb/devices
    T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
    B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 2.04
    S: Manufacturer=Linux 2.4.30-acronis ehci_hcd
    S: Product=PCI device 8086:24dd
    S: SerialNumber=00:1d.7
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
    T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=ef40
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=ef20
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=ef00
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
    D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=050d ProdID=0208 Rev= 1.00
    C:* #Ifs= 2 Cfg#= 2 Atr=80 MxPwr=500mA
    I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
    I: If#= 0 Alt= 1 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 895 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt= 2 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 831 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt= 3 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 767 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt= 4 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 703 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt= 5 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 639 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt= 6 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 575 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt= 7 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 511 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt= 8 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 447 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt= 9 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 383 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt=10 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 319 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt=11 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 255 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt=12 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 191 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt=13 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 127 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 0 Alt=14 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms
    E: Ad=82(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
    E: Ad=83(I) Atr=01(Isoc) MxPS= 66 Ivl=1ms
    I: If#= 1 Alt= 0 #EPs= 0 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=eec0
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
    D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1
    P: Vendor=04b8 ProdID=011d Rev= 1.00
    S: Manufacturer=EPSON
    S: Product=EPSON Scanner
    C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
    I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
    E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

    $ cat /proc/bus/ieee1394/devices
    file not found

    $ cat /proc/partitions
    major minor #blocks name

    22 0 39082680 ide/host0/bus1/target0/lun0/disc
    22 1 39078081 ide/host0/bus1/target0/lun0/part1
    3 0 40209120 ide/host0/bus0/target0/lun0/disc
    3 1 40202631 ide/host0/bus0/target0/lun0/part1
    $ dmesg
    <4>Linux version 2.4.30-acronis#1 SMP Sat May 7 18:11:52 MSD 2005
    <6>BIOS-provided physical RAM map:
    <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
    <4> BIOS-e820: 0000000000100000 - 000000002ffb0000 (usable)
    <4> BIOS-e820: 000000002ffb0000 - 000000002ffc0000 (ACPI data)
    <4> BIOS-e820: 000000002ffc0000 - 000000002fff0000 (ACPI NVS)
    <4> BIOS-e820: 000000002fff0000 - 0000000030000000 (reserved)
    <4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    <5>767MB LOWMEM available.
    <4>found SMP MP-table at 000ff780
    <4>hm, page 000ff000 reserved twice.
    <4>hm, page 00100000 reserved twice.
    <4>hm, page 000e0000 reserved twice.
    <4>On node 0 totalpages: 196528
    <4>zone(0): 4096 pages.
    <4>zone(1): 192432 pages.
    <4>zone(2): 0 pages.
    <6>ACPI: RSDP (v000 ACPIAM ) @ 0x000fad60
    <6>ACPI: RSDT (v001 A M I OEMRSDT 0x02000517 MSFT 0x00000097) @ 0x2ffb0000
    <6>ACPI: FADT (v002 A M I OEMFACP 0x02000517 MSFT 0x00000097) @ 0x2ffb0200
    <6>ACPI: MADT (v001 A M I OEMAPIC 0x02000517 MSFT 0x00000097) @ 0x2ffb0390
    <6>ACPI: OEMB (v001 A M I OEMBIOS 0x02000517 MSFT 0x00000097) @ 0x2ffc0040
    <6>ACPI: DSDT (v001 A0049 A0049000 0x00000000 INTL 0x02002026) @ 0x00000000
    <6>ACPI: Local APIC address 0xfee00000
    <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    <4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
    <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
    <4>Processor #129 invalid (max 16)
    <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0])
    <6>IOAPIC[0]: Assigned apic_id 1
    <4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, IRQ 0-23
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    <6>Using ACPI (MADT) for SMP configuration information
    <4>Kernel command line: MBRCRCS=0AD8AB14,2058A7A8 ramdisk_size=18118
    <6>Initializing CPU#0
    <4>Detected 2265.643 MHz processor.
    <4>Console: colour dummy device 80x25
    <4>Calibrating delay loop... 4521.98 BogoMIPS
    <6>Memory: 766996k/786112k available (1081k kernel code, 18728k reserved, 225k data, 120k init, 0k highmem)
    <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    <6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
    <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    <6>Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
    <4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
    <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
    <6>CPU: L2 cache: 512K
    <6>CPU: Hyper-Threading is disabled
    <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
    <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
    <6>Enabling fast FPU save and restore... done.
    <6>Enabling unmasked SIMD FPU exception support... done.
    <6>Checking 'hlt' instruction... OK.
    <4>POSIX conformance testing by UNIFIX
    <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    <4>mtrr: detected mtrr type: Intel
    <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
    <6>CPU: L2 cache: 512K
    <6>CPU: Hyper-Threading is disabled
    <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
    <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000
    <4>CPU0: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 09
    <4>per-CPU timeslice cutoff: 1462.91 usecs.
    <4>enabled ExtINT on CPU#0
    <4>ESR value before enabling vector: 00000000
    <4>ESR value after enabling vector: 00000000
    <6>SMP kernel: only one processor found.
    <4>ENABLING IO-APIC IRQs
    <7>init IO_APIC IRQs
    <7> IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
    <6>..TIMER: vector=0x31 pin1=2 pin2=-1
    <6>..TIMER: works OK on IO-APIC irq0
    <4>Using local APIC timer interrupts.
    <4>calibrating APIC timer ...
    <4>..... CPU clock speed is 2265.5725 MHz.
    <4>..... host bus clock speed is 133.2688 MHz.
    <4>cpu: 0, clocks: 1332688, slice: 666344
    <4>CPU0<T0:1332688,T1:666336,D:8,S:666344,C:1332688>
    <4>Waiting on wait_init_idle (map = 0x0)
    <4>All processors have done init_idle
    <6>ACPI: Subsystem revision 20040326
    <6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
    <6>PCI: Using configuration type 1
    <6>ACPI: Interpreter enabled
    <6>ACPI: Using IOAPIC for interrupt routing
    <6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
    <6>ACPI: PCI Root Bridge [PCI0] (00:00)
    <4>PCI: Probing PCI hardware (bus 00)
    <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
    <4>Transparent bridge - PCI device 8086:244e
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    <6>PCI: Probing PCI hardware
    <7>00:00:1f[A] -> 1-18 -> IRQ 18 level low
    <7>00:00:1f -> 1-17 -> IRQ 17 level low
    <7>00:00:1d[A] -> 1-16 -> IRQ 16 level low
    <7>00:00:1d -> 1-19 -> IRQ 19 level low
    <7>00:00:1d[D] -> 1-23 -> IRQ 23 level low
    <7>00:02:08[A] -> 1-20 -> IRQ 20 level low
    <7>00:02:09[A] -> 1-21 -> IRQ 21 level low
    <7>00:02:09 -> 1-22 -> IRQ 22 level low
    <7>number of MP IRQ sources: 15.
    <7>number of IO-APIC #1 registers: 24.
    <6>testing the IO APIC.......................
    <4>
    <7>IO APIC #1......
    <7>.... register #00: 01000000
    <7>....... : physical APIC id: 01
    <7>....... : Delivery Type: 0
    <7>....... : LTS : 0
    <7>.... register #01: 00178020
    <7>....... : max redirection entries: 0017
    <7>....... : PRQ implemented: 1
    <7>....... : IO APIC version: 0020
    <7>.... IRQ redirection table:
    <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    <7> 00 000 00 1 0 0 0 0 0 0 00
    <7> 01 001 01 0 0 0 0 0 1 1 39
    <7> 02 001 01 0 0 0 0 0 1 1 31
    <7> 03 001 01 0 0 0 0 0 1 1 41
    <7> 04 001 01 0 0 0 0 0 1 1 49
    <7> 05 001 01 0 0 0 0 0 1 1 51
    <7> 06 001 01 0 0 0 0 0 1 1 59
    <7> 07 001 01 0 0 0 0 0 1 1 61
    <7> 08 001 01 0 0 0 0 0 1 1 69
    <7> 09 001 01 0 1 0 0 0 1 1 71
    <7> 0a 001 01 0 0 0 0 0 1 1 79
    <7> 0b 001 01 0 0 0 0 0 1 1 81
    <7> 0c 001 01 0 0 0 0 0 1 1 89
    <7> 0d 001 01 0 0 0 0 0 1 1 91
    <7> 0e 001 01 0 0 0 0 0 1 1 99
    <7> 0f 001 01 0 0 0 0 0 1 1 A1
    <7> 10 001 01 1 1 0 1 0 1 1 B9
    <7> 11 001 01 1 1 0 1 0 1 1 B1
    <7> 12 001 01 1 1 0 1 0 1 1 A9
    <7> 13 001 01 1 1 0 1 0 1 1 C1
    <7> 14 001 01 1 1 0 1 0 1 1 D1
    <7> 15 001 01 1 1 0 1 0 1 1 D9
    <7> 16 001 01 1 1 0 1 0 1 1 E1
    <7> 17 001 01 1 1 0 1 0 1 1 C9
    <7>IRQ to pin mappings:
    <7>IRQ0 -> 0:2
    <7>IRQ1 -> 0:1
    <7>IRQ3 -> 0:3
    <7>IRQ4 -> 0:4
    <7>IRQ5 -> 0:5
    <7>IRQ6 -> 0:6
    <7>IRQ7 -> 0:7
    <7>IRQ8 -> 0:8
    <7>IRQ9 -> 0:9
    <7>IRQ10 -> 0:10
    <7>IRQ11 -> 0:11
    <7>IRQ12 -> 0:12
    <7>IRQ13 -> 0:13
    <7>IRQ14 -> 0:14
    <7>IRQ15 -> 0:15
    <7>IRQ16 -> 0:16
    <7>IRQ17 -> 0:17
    <7>IRQ18 -> 0:18
    <7>IRQ19 -> 0:19
    <7>IRQ20 -> 0:20
    <7>IRQ21 -> 0:21
    <7>IRQ22 -> 0:22
    <7>IRQ23 -> 0:23
    <6>.................................... done.
    <6>PCI: Using ACPI for IRQ routing
    <6>Linux NET4.0 for Linux 2.4
    <6>Based upon Swansea University Computer Society NET3.039
    <4>Initializing RT netlink socket
    <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
    <5>apm: overridden by ACPI.
    <4>Starting kswapd
    <6>devfs: v1.12c (2002081:cool: Richard Gooch (rgooch@atnf.csiro.au)
    <6>devfs: boot_options: 0x0
    <6>ACPI: Processor [CPU1] (supports C1)
    <3>Loading, please wait...
    <6>vesafb: framebuffer at 0xf0000000, mapped to 0xf0809000, size 1875k
    <6>vesafb: mode is 800x600x16, linelength=1600, pages=67
    <6>vesafb: protected mode interface info at c000:54ad
    <6>vesafb: scrolling: redraw
    <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
    <4>Console: switching to colour frame buffer device 100x37
    <6>fb0: VESA VGA frame buffer device
    <6>Serial driver version 5.05c (2001-07-0:cool: with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    <6>ttyS0 at 0x03f8 (irq = 4) is a 16550A
    <6>ttyS1 at 0x02f8 (irq = 3) is a 16550A
    <4>RAMDISK driver initialized: 16 RAM disks of 18118K size 1024 blocksize
    <6>md: md driver 0.90.0, Adaptec md 0.1.0, MAX_MD_DEVS=256, MD_SB_DISKS=27
    <6>md: Autodetecting RAID arrays.
    <6>md: autorun ...
    <6>md: ... autorun DONE.
    <6>NET4: Linux TCP/IP 1.0 for NET4.0
    <6>IP Protocols: ICMP, UDP, TCP, IGMP
    <6>IP: routing cache hash table of 8192 buckets, 64Kbytes
    <6>TCP: Hash tables configured (established 262144 bind 65536)
    <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    <5>RAMDISK: Compressed image found at block 0
    <6>Freeing initrd memory: 8519k freed
    <4>VFS: Mounted root (romfs filesystem) readonly.
    <6>Freeing unused kernel memory: 120k freed
    <4>Warning: unable to open an initial console.
    <4>$ /bin/mount -t proc proc /proc
    <4>$ /bin/mount -t devfs devfs /devfs
    <4>$ /bin/insmod floppy
    <4>Using /lib/modules/floppy.o
    <6>inserting floppy driver for 2.4.30-acronis
    <6>Floppy drive(s): fd0 is 1.44M
    <6>FDC 0 is a post-1991 82077
    <4>$ /bin/insmod scsi_mod
    <4>Using /lib/modules/scsi_mod.o
    <6>SCSI subsystem driver Revision: 1.00
    <4>$ /bin/insmod sd_mod
    <4>Using /lib/modules/sd_mod.o
    <4>$ /bin/insmod cdrom
    <4>Using /lib/modules/cdrom.o
    <4>$ /bin/insmod sr_mod
    <4>Using /lib/modules/sr_mod.o
    <4>$ /bin/insmod st
    <4>Using /lib/modules/st.o
    <4>$ /bin/insmod sg
    <4>Using /lib/modules/sg.o
    <4>$ /bin/insmod fat
    <4>Using /lib/modules/fat.o
    <4>$ /bin/insmod vfat
    <4>Using /lib/modules/vfat.o
    <4>$ /bin/insmod ntfs
    <4>ntfs.o: no module by that name found
    <4>$ /bin/insmod isofs
    <4>Using /lib/modules/isofs.o
    <4>$ /bin/insmod udf
    <4>Using /lib/modules/udf.o
    <5>udf: registering filesystem
    <4>$ /bin/insmod nls_utf8
    <4>Using /lib/modules/nls_utf8.o
    <4>$ /bin/insmod pci_hotplug
    <4>Using /lib/modules/pci_hotplug.o
    <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    <4>$ /bin/insmod acpiphp
    <4>Using /lib/modules/acpiphp.o
    <6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
    <4>init_module: acpiphp
    <4>: Unknown error 19
    <4>$ /bin/insmod ide-core
    <4>Using /lib/modules/ide-core.o
    <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    <4>$ /bin/insmod piix
    <4>Using /lib/modules/piix.o
    <6>ICH5: IDE controller at PCI slot 00:1f.1
    <4>PCI: Enabling device 00:1f.1 (0005 -> 0007)
    <6>ICH5: chipset revision 2
    <6>ICH5: not 100% native mode: will probe irqs later
    <6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    <6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
    <4>$ /bin/insmod ide-detect
    <4>Using /lib/modules/ide-detect.o
    <4>hda: HDS722540VLAT20, ATA DISK drive
    <4>blk: queue f0a60b20, I/O limit 4095Mb (mask 0xffffffff)
    <4>hdc: WDC WD400BB-00DEA0, ATA DISK drive
    <4>hdd: AOPEN DVD1648/AAP, ATAPI CD/DVD-ROM drive
    <4>blk: queue f0a60f8c, I/O limit 4095Mb (mask 0xffffffff)
    <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    <4>ide1 at 0x170-0x177,0x376 on irq 15
    <4>$ /bin/insmod ide-disk
    <4>Using /lib/modules/ide-disk.o
    <4>hda: attached ide-disk driver.
    <4>hda: host protected area => 1
    <6>hda: 80418240 sectors (41174 MB) w/1794KiB Cache, CHS=5005/255/63, UDMA(100)
    <4>hdc: attached ide-disk driver.
    <4>hdc: host protected area => 1
    <6>hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(33)
    <6>Partition check:
    <6> /dev/ide/host0/bus0/target0/lun0: p1
    <6> /dev/ide/host0/bus1/target0/lun0: [PTBL] [4865/255/63] p1
    <4>$ /bin/insmod ataraid
    <4>Using /lib/modules/ataraid.o
    <4>$ /bin/insmod iswraid
    <4>Using /lib/modules/iswraid.o
    <6>iswraid: Intel(tm) Software RAID driver Version 0.1.4.3
    <6>iswraid: Probed 0 SCSI disks, found 0 ISWRAID disks
    <4>init_module: iswraid
    <4>: Unknown error 19
    <4>$ /bin/insmod sk98lin
    <4>Using /lib/modules/sk98lin.o
    <4>sk98lin: Network Device Driver v7.07
    <4>(C)Copyright 1999-2004 Marvell(R).
    <4>eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
    <4> PrefPort:A RlmtMode:Check Link State
    <4>$ /bin/insmod usbcore
    <4>Using /lib/modules/usbcore.o
    <6>usb.c: registered new driver usbdevfs
    <6>usb.c: registered new driver hub
    <4>$ /bin/insmod usb-uhci
    <4>Using /lib/modules/usb-uhci.o
    <6>usb-uhci.c: $Revision: 1.275 $ time 17:59:17 May 7 2005
    <6>usb-uhci.c: High bandwidth mode enabled
    <7>PCI: Setting latency timer of device 00:1d.0 to 64
    <6>usb-uhci.c: USB UHCI at I/O 0xeec0, IRQ 16
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 1
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <7>PCI: Setting latency timer of device 00:1d.1 to 64
    <6>usb-uhci.c: USB UHCI at I/O 0xef00, IRQ 19
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 2
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <7>PCI: Setting latency timer of device 00:1d.2 to 64
    <6>usb-uhci.c: USB UHCI at I/O 0xef20, IRQ 18
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 3
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <7>PCI: Setting latency timer of device 00:1d.3 to 64
    <6>usb-uhci.c: USB UHCI at I/O 0xef40, IRQ 16
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 4
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    <4>$ /bin/insmod ehci-hcd
    <4>Using /lib/modules/ehci-hcd.o
    <7>PCI: Setting latency timer of device 00:1d.7 to 64
    <6>ehci_hcd 00:1d.7: PCI device 8086:24dd
    <6>ehci_hcd 00:1d.7: irq 23, pci mem f0ac2800
    <6>usb.c: new USB bus registered, assigned bus number 5
    <6>ehci_hcd 00:1d.7: enabled 64bit PCI DMA
    <7>PCI: cache line size of 128 is not supported by device 00:1d.7
    <6>ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    <6>hub.c: USB hub found
    <6>hub.c: 8 ports detected
    <4>Waiting for USB/IEEE1394 devices arrival...
    <6>hub.c: new USB device 00:1d.0-1, assigned address 2
    <4>usb.c: USB device 2 (vend/prod 0x4b8/0x11d) is not claimed by any active driver.
    <6>hub.c: new USB device 00:1d.1-1, assigned address 2
    <4>usb.c: USB device 2 (vend/prod 0x50d/0x20:cool: is not claimed by any active driver.
    <4>$ /bin/mount -t usbdevfs usbdevfs /proc/bus/usb
    <4>$ /bin/insmod ide-scsi
    <4>Using /lib/modules/ide-scsi.o
    <4>hdd: attached ide-scsi driver.
    <6>hdd: DMA disabled
    <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    <4> Vendor: AOPEN Model: DVD1648/AAP Rev: 1.04
    <4> Type: CD-ROM ANSI SCSI revision: 02
    <4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
    <4>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
    <6>Uniform CD-ROM driver Revision: 3.12
    <4>Checking for graphic mode...
    <4>Detecting mouse...
    <4>$ /bin/gpm -R -m /devfs/misc/psaux -t imps2
    <4>Checking for network adapter...
    <4>$ /bin/insmod af_packet
    <4>Using /lib/modules/af_packet.o
    <4>$ /bin/insmod smbfs
    <4>Using /lib/modules/smbfs.o
    <4>$ /bin/ifconfig lo 127.0.0.1
    <4>$ /bin/ifconfig lo up
    <4>$ /bin/insmod nls_cp850
    <4>Using /lib/modules/nls_cp850.o
    <4>$ /bin/insmod ext2
    <4>ext2.o: no module by that name found
    <4>$ /bin/insmod jbd
    <4>jbd.o: no module by that name found
    <4>$ /bin/insmod reiserfs
    <4>reiserfs.o: no module by that name found
    <4>$ /bin/insmod xfs
    <4>xfs.o: no module by that name found
    <4>$ /bin/insmod jfs
    <4>jfs.o: no module by that name found
    <4>$ /bin/insmod sunrpc
    <4>sunrpc.o: no module by that name found
    <4>$ /bin/insmod snapapi
    <4>snapapi.o: no module by that name found
    <6>md: Autodetecting RAID arrays.
    <6>md: autorun ...
    <6>md: ... autorun DONE.
    <4>$ /bin/rm -rf /etc/codepage /etc/pcmcia
    <4>$ /bin/sh
    <4>eth0: network connection up using port A
    <4> speed: 1000
    <4> autonegotiation: yes
    <4> duplex mode: full
    <4> flowctrl: symmetric
    <4> role: slave
    <4> irq moderation: disabled
    <4> scatter-gather: enabled
    <4> tx-checksum: enabled
    <4> rx-checksum: enabled
    <4>Cannot create directory `mntdir'
    <4>: Unknown error 17
    <4>Cannot create directory `mntdir'
    <4>: Unknown error 17
    <4>Cannot create directory `mntdir'
    <4>: Unknown error 17

    $ lspci
    02:0d.0 14f1:1059 148d:1059 07:80:00
    02:05.0 11ab:4320 1043:811a 02:00:00 sk98lin
    01:00.0 1002:5964 12ab:5964 03:00:00
    00:1f.5 8086:24d5 1043:80f3 04:01:00
    00:1f.3 8086:24d3 1043:80a6 0c:05:00
    00:1f.1 8086:24db 1043:80a6 01:01:8a piix [PIIX IDE]
    00:1f.0 8086:24d0 0000:0000 06:01:00
    00:1e.0 8086:244e 0000:0000 06:04:00 [PCI Bridge]
    00:1d.7 8086:24dd 1043:80a6 0c:03:20 ehci-hcd [ehci_hcd]
    00:1d.3 8086:24de 1043:80a6 0c:03:00 usb-uhci
    00:1d.2 8086:24d7 1043:80a6 0c:03:00 usb-uhci
    00:1d.1 8086:24d4 1043:80a6 0c:03:00 usb-uhci
    00:1d.0 8086:24d2 1043:80a6 0c:03:00 usb-uhci
    00:01.0 8086:2571 0000:0000 06:04:00 [PCI Bridge]
    00:00.0 8086:2570 1043:80f2 06:00:00
    Modules: ataraid ide-detect ide-disk floppy ide-scsi sd_mod sg sr_mod st af_packet isofs nls_cp850 nls_utf8 pci_hotplug smbfs udf vfat
     
  6. Acronis Support

    Acronis Support Acronis Support Staff

    Joined:
    Apr 28, 2004
    Posts:
    25,885
    Hello softy783,

    Thank you for all the information you sent us.

    I have found your letter and we will let you know the result of the contacting our Development Team as soon as possible.

    Please accept our apologies for your inconvenience.

    Thank you.
    --
    Irina Shirokova
     
  7. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    as of today no reply
     
  8. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    i just noticed that paid phone support is available how much is it and does it encumber presale demo version
     
  9. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    as of today no reply so much for pre sales
     
  10. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    wanted to add this info:
    with ghost 2003 i have to specify dos drivers for the nic i am using to
    access resources in dos mode

    could it be that since your app does not specifically ask for such a driver
    that this causes me not to see other shared resource
     
  11. Acronis Support

    Acronis Support Acronis Support Staff

    Joined:
    Apr 28, 2004
    Posts:
    25,885
    Hello softy783,

    Could you please send the output you posted here to our e-mail in reply to Max's e-mail? He is still waiting for this output and that is why he cannot provide you with the solution.

    Thank you.
    --
    Ilya Toytman
     
  12. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    i will do so for the second time, i will have to go through all the steps again.
    there may be an alternative way to do this vs. having your customer
    endlessly wait on a response on communicates tha thei send you or vice versa
    to
    attach a autoscript that would generate a follow up prompt to send and answer to email that was send but never answered.
    if you had not said anything about not receiving the email just think you and i could be sitting here eighty years from now..just a thought to
    commercially manage online service tickets ie "otr" (-:
     
  13. Acronis Support

    Acronis Support Acronis Support Staff

    Joined:
    Apr 28, 2004
    Posts:
    25,885
    Hello softy783,

    If you send the output using the "Reply" feature of your e-mail client (or web interface) it will be delivered straight to the person who is investigating the problem thus making the whole process easier and faster. As soon as Max gets your letter he will be able to investigate the problem. Please let me know when you send it so that I could check that there is no problems in e-mail delivery.

    Thank you.
    --
    Ilya Toytman
     
  14. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    hi Ilya Toytman,
    thanks 4 the expediate reply, i am still in process of delivering the data.
    however i still had one unanswered ? and now there are two.

    first what is your live hourly call in support rate, is there a 24/7 support line??
    your home number maybe??

    second i noticed, since my last post, a gazillion new troublesome posts in this forum not including the direct email support, is this product in beta mode obisouly for a $1000.00 a pop
    i am not interested in buying a boat anchor. thanks inadvance 4 your response.

    btw: i praise you for creating a open forum for your product,
    since it provides consumers with peer to peer perspective and somewhat
    nonbias insight , to your products performance. unlike ghost 2003
     
  15. softy783

    softy783 Registered Member

    Joined:
    Jul 10, 2005
    Posts:
    12
    hi Ilya Toytman,
    as requested i collected all info and emailed it 4 times to 4 different request
    again.
    it is also available here for a period of time to download,

    https://public.selfip.com/public.selfip.com.zip

    short of knocking on your door in person let me know what other
    hurddle i have to jump to get this resolved.

    please let me know of cost of phone support thanks inadvance
     
  16. Acronis Support

    Acronis Support Acronis Support Staff

    Joined:
    Apr 28, 2004
    Posts:
    25,885
    Hello softy783,

    We have recieved all the info you sent. You will be answered very soon.

    As for the phone support, you may contact sales@acronis.com concerning purchasing either per-incident or maintenance phone support. However, in your case it dosn't looks like the phone call will change anything. The files you sent must be analyzed by our Development Team to find out the reason for the problem. This will allow us to find the solution.

    Thank you.
    --
    Ilya Toytman
     
Thread Status:
Not open for further replies.