Phan0m Rules and ISP "Free degroupé" using rfc1483 VC MUX

Discussion in 'LnS English Forum' started by NeoY2kv2, Sep 4, 2003.

Thread Status:
Not open for further replies.
  1. NeoY2kv2

    NeoY2kv2 Guest

    Hi . I'm french. In paris is an ISP that's called "Free degroupé". It doesn't use PPPoA or PPPoE systems, but RFC 1483 routé VC MUX.

    So, in Phant0m ruleset, i have to specify my gateway mac address. Kamui telle me that it was useless with PPPoA connections... but i don't use this protocol, so i think i would need to ask my ISP, no?

    Whatever, even if i disable this rule, i got very much problems with this ruleset. Half of websites can't be read, MSN and AIM may hang up some times...

    I configured the ruleset as wrote in the help page, but with so many problems, i can't use it. I think it's because of the protocol used wich isn't very common (only a few modems can use it, and in france is a special modem called "Freebox" - unfortunately i only got a Sagem modem on USB port for the moment ).

    Thanks
    NeoY2k (who lost his password LOL )
     
  2. neoy2kv2

    neoy2kv2 Guest

    OOOOoooooops sorry i would say PhanT0m , excuse me...
     
  3. Phant0m

    Phant0m Registered Member

    Joined:
    Jun 7, 2003
    Posts:
    3,721
    Location:
    Canada
    Hey NeoY2kv2

    Apologies for the late response; If it’s not much troubles I would like to have a Raw Log-file sent throughout the entire session, Go-to Look 'n' Stop's "Options" screen and click on "Advanced options..." button and check "Raw Log" if hadn't already been checked.

    Attempt to use Phant0m`` Rule-set $v4.0, configure if hadn’t already been and attempt to access Internet Resources. After few attempts change into EnhancedRulesSet.rls and E-mail me the Raw-Log (raw*.log) file for the current date which will be located in \Soft4Ever\looknstop\logs\.

    My E-mail: Phant0m@wilderssecurity.info

    Thanks in Advance…
     
  4. neoy2kv2

    neoy2kv2 Guest

    Excuse me i'm a bit late. I did'nt understand very well but i will try what u say and send you the log file.

    Thanks
    NeoY2k (the v2 is only beacause i lost my password...)
     
  5. Neoy2kv2

    Neoy2kv2 Guest

    Okay i understood.
    I made the log file, i'm gonna send it to you.
    What happened when i launch the firewall?

    Any connection was impossible "Host un reachable, could'nt locate remote server etc..."
    AIM crashed first, and msn crashed just after.
    Thx
     
  6. neoy2kv2

    neoy2kv2 Guest

    Ah, i would say too:

    There are not really "modems", the modem is known as a dhcp relay.
     
  7. neoy2kv2

    neoy2kv2 Guest

    I tested your new rules: problem solved! Congratulations :) :) :) phant0m!

    But, is this 4.1 version as secure as the 4.0 version?
     
  8. Phant0m

    Phant0m Registered Member

    Joined:
    Jun 7, 2003
    Posts:
    3,721
    Location:
    Canada
    Thanks! And yes and-some.... :D
     
  9. neoy2kv2

    neoy2kv2 Guest

    Ok, goooood!

    Now, i have ton configure it to allow my computer to connect to msn...
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.