Nero Burning failed?

Discussion in 'other software & services' started by scorpio88, Feb 2, 2008.

Thread Status:
Not open for further replies.
  1. scorpio88

    scorpio88 Registered Member

    Joined:
    Feb 2, 2008
    Posts:
    5
    Hopefully someone here can help me. I am trying to make a few copies of a DVD but it keeps failing (homemade, it's of a TV show that's not released on DVD so it's not security issues - I had taped it back in 2000 but my VHS tape is getting old so a friend put it on DVD for me, and now I want to make some copies of it for backup).

    Now I was able to copy it once, but now for some reason I keep getting the same error about halfway to the end of the burning process. It's getting frustrating as I've gone through 22 DVD-Rs and I'm not made out of money. Please help (and thanks in advance)...I attached the log below:


    ---------


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\nero\Wnaspi32.dll':

    Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
    Nero Version: 6.6.0.13
    Internal Version: 6, 6, 0, 13c
    (Nero Express)
    Recorder: <MATSHITA DVD-RAM UJ-841S>Version: 1.00 - HA 0

    TA 1 - 6.6.0.13
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <MATSHITA DVD-RAM UJ-841S >Version: 1.00 - HA 0

    TA 1 - 6.6.0.13
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHV2060AT PL atapi Port 0

    ID 0 DMA: On
    CdRomPeripheral : MATSHITA DVD-RAM UJ-841S atapi Port 0

    ID 1 DMA: On

    === CDRom-Device-Map ===
    MATSHITA DVD-RAM UJ-841S E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 72351744 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 495MB (507184kB)
    Free physical memory: 39MB (40200kB)
    Memory in use : 92 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.2.2008
    UDF/ISO compilation
    6:25:55 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    6:25:56 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VIDEO_TS.IFO has been modified

    6:25:56 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VIDEO_TS.BUP has been modified

    6:25:56 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_01_0.IFO has been modified

    6:25:56 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_01_0.BUP has been modified

    6:25:56 PM #6 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_02_0.IFO has been modified

    6:25:56 PM #7 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_02_0.BUP has been modified

    6:25:56 PM #8 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_03_0.IFO has been modified

    6:25:56 PM #9 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_03_0.BUP has been modified

    6:25:56 PM #10 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_04_0.IFO has been modified

    6:25:56 PM #11 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_04_0.BUP has been modified

    6:25:56 PM #12 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_05_0.IFO has been modified

    6:25:56 PM #13 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_05_0.BUP has been modified

    6:25:56 PM #14 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_06_0.IFO has been modified

    6:25:56 PM #15 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_06_0.BUP has been modified

    6:25:56 PM #16 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_07_0.IFO has been modified

    6:25:56 PM #17 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_07_0.BUP has been modified

    6:25:56 PM #18 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_08_0.IFO has been modified

    6:25:56 PM #19 Text 0 File DVDVideoCompilation.cpp, Line 549
    Content of VTS_08_0.BUP has been modified

    6:25:56 PM #20 Phase 113 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed

    6:25:56 PM #21 Text 0 File Isodoc.cpp, Line 6194
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    6:25:56 PM #22 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    6:25:56 PM #23 Text 0 File Reader.cpp, Line 127
    Reader running

    6:25:56 PM #24 Text 0 File Writer.cpp, Line 122
    Writer MATSHITA DVD-RAM UJ-841S running

    6:25:56 PM #25 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    6:25:56 PM #26 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    6:25:56 PM #27 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    6:25:56 PM #28 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45,

    4489MB)
    Last address to be written: 2066463 (459:12.63,

    4036MB)

    6:25:56 PM #29 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    6:25:56 PM #30 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: MATSHITA DVD-RAM UJ-841S, Media type: DVD-RW
    Disc Manufacturer: MBI01R - WG 20
    Disc Application Code: 2, Disc Physical Code: 214

    6:25:56 PM #31 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:25:56 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line

    830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2066464 (2066464) =

    #2066464/459:12.64
    relocatable, disc pos for caching/writing not required/

    required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks,

    length 2066464 blocks [MATSHITA DVD-RAM UJ-841S]
    --------------------------------------------------------------

    6:25:56 PM #33 Text 0 File ThreadedTransferInterface.cpp, Line

    1043
    Prepare recorder [MATSHITA DVD-RAM UJ-841S] for write in

    CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0

    0 4232118272, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2066464 | lead-out | 1 | 0x41 | 0x00

    6:25:56 PM #34 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    6:25:56 PM #35 Text 0 File Burncd.cpp, Line 4051
    Cache writing successful.

    6:25:56 PM #36 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    6:25:56 PM #37 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2770 KB/s)

    6:25:56 PM #38 Text 0 File ThreadedTransferInterface.cpp, Line

    2609
    Verifying disc position of item 0 (relocatable, disc pos, no

    patch infos, orig at #0): write at #0

    6:25:56 PM #39 Text 0 File DVDR.cpp, Line 2267
    Recording mode: Sequential Recording Mode

    6:25:56 PM #40 Text 0 File Mmc.cpp, Line 21469
    Set BUFE: SmoothLink -> ON

    6:25:56 PM #41 Text 0 File DVDR.cpp, Line 2421
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:25:56 PM #42 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-RW (3), Part Version: 3
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path

    (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74

    um/track
    Starting Physical Sector Number of Data Area: 30000 h

    (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h (LBN:

    FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00

    ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

    ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

    ................

    6:36:12 PM #43 SCSI -400 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x06980000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x03
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x0C 0x55 0x00 0x00 0x00 0x20 0x00

    0x00 0x00
    Sense Data: 0xF1 0x00 0x04 0x00 0x0C 0x51 0xF0 0x0A
    0x00 0x2A 0x00 0x00 0x03 0x00

    6:36:12 PM #44 CDR -400 File Writer.cpp, Line 311
    Unspecified target error

    6:36:13 PM #45 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    6:36:13 PM #46 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    6:36:14 PM #47 Text 0 File DVDR.cpp, Line 2658
    EndDAO: Last written address was 808191

    6:36:14 PM #48 Phase 181 File dlgbrnst.cpp, Line 1832
    Writing lead-out...

    6:36:14 PM #49 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2770 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created

    24/07/2006 3:00:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=3.00.40a, size=36528 bytes, created

    24/07/2006 3:00:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180

    (xpsp_sp2_rtm.040803-215:cool:, size=95360 bytes, created 03/08/2004

    10:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows

    NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  2. NICK ADSL UK

    NICK ADSL UK Administrator

    Joined:
    May 13, 2003
    Posts:
    9,218
    Location:
    UK

    Attached Files:

  3. scorpio88

    scorpio88 Registered Member

    Joined:
    Feb 2, 2008
    Posts:
    5
    Tried it, but it still fails. :(
     
  4. zfactor

    zfactor Registered Member

    Joined:
    Mar 10, 2005
    Posts:
    6,013
    Location:
    on my zx10-r
    are you trying to copy the originl again or the copy?
     
  5. scorpio88

    scorpio88 Registered Member

    Joined:
    Feb 2, 2008
    Posts:
    5
    The original. I'm doing everything that I did the time before. What I did the first time was copy the VIDEO_TS folder (the only folder the original had), and save it to my HD. Then I opened up Nero StartSmart (6) and went to the Video/Photos option, and DVD-Video one. Put the blank DVD-R in and burn. It fails near 75-99% now, however even though it failed, I put the burned copy in and it seems to work fine on the computer so far. I don't know about a DVD Player though. Just wondering why it fails near the end.
     
    Last edited: Feb 2, 2008
  6. nanana1

    nanana1 Frequent Poster

    Joined:
    Jun 22, 2007
    Posts:
    947
    Don't use Nero bloatware, try DVDFabPlatinum, it copies to your hard disk first before writing to DVD.

    Also, use a DVD-RW to try first to avoid creating coasters:D
     
  7. zfactor

    zfactor Registered Member

    Joined:
    Mar 10, 2005
    Posts:
    6,013
    Location:
    on my zx10-r
    try slysoft clone dvd.. i also hate nero
     
  8. scorpio88

    scorpio88 Registered Member

    Joined:
    Feb 2, 2008
    Posts:
    5
    Tried using that program, got the same thing happen to me. I tried another program my friend suggested, and it gave me a hardware error. Does anyone know what to do (in terms of the hardware error)? It was working fine the other day. o_O
     
  9. zfactor

    zfactor Registered Member

    Joined:
    Mar 10, 2005
    Posts:
    6,013
    Location:
    on my zx10-r
    could the disc now be bad for some reason? can you scan it with nero to see??
     
  10. scorpio88

    scorpio88 Registered Member

    Joined:
    Feb 2, 2008
    Posts:
    5
    The drive? How can I do that?

    If you mean the actual DVD-R, I keep using new ones each time.
     
  11. Huupi

    Huupi Registered Member

    Joined:
    Sep 2, 2006
    Posts:
    2,024
    what brand of media are u using,it happen freqently that switching media brand solve the burning problem,one good to go is Verbatum,for me i ditched Philips and TDK for Verbatum and it solved my burning problems.

    Admit that yours is maybe a different cause but at least you can try.

    http://www.digitalfaq.com/media/dvdmedia.htm
     
  12. GlobalForce

    GlobalForce Regular Poster

    Joined:
    Jun 30, 2004
    Posts:
    3,581
    Location:
    Garden State, USA
    Hi Scorpio,

    I'm no expert but a few observation's stand out:

    • Dated firmware - http://forum.rpc1.org/dl_firmware.php?download_id=2244
      *Investigate carefully the process of upgrading should that be the course you take.
    • The upgrade shown in the wine emulator will specify whether it's applicable.

      uj-841_fw.png

    • Memories too high. Disable cpu eater's prior to burning.
    • Though your disk's are recognized, consider more appropriate media.
      _oogle these code's for a suggested drive/media compatibility chart. ;)
    • The ratio of used vs available free space on your drive?

      [​IMG]

    • Does nero's info tool confirm your drive can handle the write speed?

    • Check your event log's. Are any listing drive related error's?

    • Make certain all physical connection's are secure.



    GF
     
    Last edited: Feb 3, 2008
  13. zfactor

    zfactor Registered Member

    Joined:
    Mar 10, 2005
    Posts:
    6,013
    Location:
    on my zx10-r
    no i mean scan the original disc being used the you are trying to make a copy of to see if there is anything wrong with it now
     
Loading...
Thread Status:
Not open for further replies.