Multiple Drives/ TDS-3

Discussion in 'Trojan Defence Suite' started by Rilla927, Jul 16, 2005.

Thread Status:
Not open for further replies.
  1. Rilla927

    Rilla927 Registered Member

    Joined:
    May 12, 2005
    Posts:
    1,710
    If you have multiple drives, how can TDS-3 protect and or scan all?

    Rilla927
     
  2. FanJ

    FanJ Guest

    Hi Rilla,

    I don't see the problem, but maybe I'm missing something.

    For the resident protection there is Exec Prot.

    For on-demand scanning there is no problem either.
    Just make sure that TDS-3 scans them all.
    Several ways to do it:
    - via Scan Control; you see there in Available scans for example "Scan All Hard Drives".
    - via TDS > Edit Config Text Files > Scans. You can make your own scan-scenario, see here:
    https://www.wilderssecurity.com/showthread.php?t=71784

    I hope this helps and that I understood you right ;)
    Cheers, Jan.
     
  3. Jooske

    Jooske Registered Member

    Joined:
    Feb 12, 2002
    Posts:
    9,713
    Location:
    Netherlands, EU near the sea
    Add the "scan all logical drives" to make sure all partitions are scanned.
    If you have the in a network, you can scan the logical drives and partitions from one place, but not the memories from other computers from your other system. Of course you have to share those drives so TDS from the main system has all access to them.
    If you open the Scan Control and browse you can see which drives are available for you.
    This does not mean you can do with one license to protect all your network btw: for each individual pc you'll need to install TDS with it's own license for all the protection and scanning all levels and memory.
     
Thread Status:
Not open for further replies.