Magic Partition Recovery

Discussion in 'backup, imaging & disk mgmt' started by ciro quagliano, Jun 19, 2019.

  1. ciro quagliano

    ciro quagliano Registered Member

    Joined:
    Jun 19, 2019
    Posts:
    3
    Location:
    italia
    hi everyone and sorry for my English, I am Italian .. I expose my problem to you .. having lost all my files, I try to recover them with the Magic Partition Recovery program..I choose the hard disk (2 tera) and launch the scan.after a few days, it had reached 53% .. but then I found it again at 0% .. and the scan was going on..but it's a normal procedure? .. or is there something that doesn't it goes?
    thank you to those who want to help me ..
     
  2. Brian K

    Brian K Imaging Specialist

    Joined:
    Jan 28, 2005
    Posts:
    12,111
    Location:
    NSW, Australia
    ciro,

    When did this happen? Did you turn your computer on and found the partition was missing? Or did you accidentally delete the partition?

    What does that drive look like in Disk Management? Is a RAW partition present or no partition at all?
     
  3. ciro quagliano

    ciro quagliano Registered Member

    Joined:
    Jun 19, 2019
    Posts:
    3
    Location:
    italia
    the files have been deleted due to crap that I did .. basically I wanted to divide the hard disk into 2 partitions with AOMEI Partition Assistant..and I don't know why, at the end of the process I found myself with 2 completely empty partitions ..then I thought of trying to recover the content with Magic Partition Recovery..then it is abnormal that I started the 0% scan again? .. when I saw it, I blocked the process and saw the results a bit .. inside the window you could see all the folders I had..we were almost empty..as if you hadn't finished scanning yet..then something else..in the magic partition program, mi you see the hard disks to be selected, where the offending hard disk is also renamed with the letter i .. while below is the physical disks category, where the offending hard disk is always, but renamed WD ex HDD 1021 USB Device..the first time I scanned and where it started again With the scan, I had chosen the latter ... while now that I have started a new scan, I chose the one renamed with the letter i .. but is there any difference besides having 2 different titles? ..
     
  4. Brian K

    Brian K Imaging Specialist

    Joined:
    Jan 28, 2005
    Posts:
    12,111
    Location:
    NSW, Australia
    ciro,

    It's likely to be data corruption rather than bad sectors on the hard drive. Having Fast Startup turned on can do this when you make changes on an offline hibernated drive.

    I suggest you run chkdsk on each partition. If the drive letter is X: then

    chkdsk X: /f

    You should confirm your RAM is OK (use memtest86+) before running chkdsk as chkdsk and bad RAM could increase the corruption.

    Chkdsk could fix the corruption.
     
  5. ciro quagliano

    ciro quagliano Registered Member

    Joined:
    Jun 19, 2019
    Posts:
    3
    Location:
    italia
    look at the picture, before the progress bar returned to 0% the drivers found were 3..then when the progress bar returned to 0% it found me 6 drivers..then in the second arrow below, it indicates the files who is continuing to find them
    http://i65.tinypic.com/16i87f6.png
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.