Configure & Activate Ant-Mac Spoofing

Can anyone tell me how to set this feature please. I dont have an ethernet or router, neither am I on a network. I just have a plain ADSL modem (Voyager 105).

Is the anti mac spoofing rule designed for this type of set up. If so how do I "input the configuration " to activate it?

Thanks


Terry

 

No, AFAIK this is NOT needed for your setup.
This is only for networks, were people can try to hijack your communication with another computer by redirecting traffic.

Now, just as an example how to set this rule:

start - run - type: cmd

This should open a dos-window. Type: ipconfig /all

You should see a "Physical Address"-entry, with a xx-xx-xx-xx-xx-xx (6 groups of 2 digits). This is your MAC address, and needs to be entered in the Anti-MAC spoofing rule. Then the rule needs to be activated in the rule-set by placing a green tick mark at the start of the rule

(BTW: anti-mac-spoofing rule can hold only one adapter at a time, so if you change between adapters, you need to change MAC addresses accordingly).

 

Many thanks a very clear response. I can forget this one now.

Terry

 

and where i can get this rule? ant-mac spoofing.rie

thnx very much

 

the anti-mac spoofing rule is part of Phant0m's ruleset, i dont have a link however.

 

Hello,

You will have it import it from the desktop into your current ruleset,,Where can you get it?There is a ruleset from terry up with Phant0m;s ruleset and LnS rules in there also download it and make it into a rie file,and your done!,just put in the rule right under TCP : Block incoming connections and it will be fine and you have to add your Mac address as you already know,good luck!


If you have trouble making an rie file or a rls file,just copy any rule set on to your desktop and delete everything in it,then cut and paste terry's ruleset into this and save,rename to rie and put it in your look"n"stop folder and you will see a rie file.

To import it go to import and find the rie file then look for the rule anti- mac,put a check in that box and it will be in your current in your ruleset and move it down to just put in the rule right under TCP : Block incoming connections just below it.

 

c'mmon ppl....i only want a print screen with ant-mac spoofing rule.

thnx again


ps: i'm in a 3k ppl network and i have nasty problems with mac-spoofing from others.

 

"SS" for Anti-Mac Spoofing



HTH ...

 

thnx
i dont have the same config..but i think is ok, ?
http://213.239.215.85/~vlad/ss.JPG

 

yes it should be ok, just enable it and ur all set to go