CLONED DRIVE WONT BOOT

Discussion in 'Acronis True Image Product Line' started by tigerman42, Nov 9, 2004.

Thread Status:
Not open for further replies.
  1. tigerman42

    tigerman42 Registered Member

    Joined:
    Nov 9, 2004
    Posts:
    1
    I have good and bad to tell.I used true image on a friends pc who's hard drive was about to die and it worked beautifully ,but it was a sata to sata clone.
    Now i tried it it mine as im moving interstate so i wanted to take a hard drive with me , but the cloned image was an ata to sata and it gets to the windows logo and thats it. So i'm guessing it has something to with sata drivers i need on the drive so can i assume it cant be done or can it be done and load the drivers after. Any advice would be fantastic.

    thanks
     
  2. John Farrar

    John Farrar Registered Member

    Joined:
    Nov 9, 2004
    Posts:
    194
    Assuming you are using Windows XP, boot from the XP CD and go to Recovery. When logged into the OS use FixMBR as suggested by Andrew in this forum.
    HTH and Good Luck
    John
     
  3. Acronis Support

    Acronis Support Acronis Support Staff

    Joined:
    Apr 28, 2004
    Posts:
    25,885
Thread Status:
Not open for further replies.