I have one USB drive that causes this problem. I connect it when I'm at the screen where I choose the full version of TI or the safe version....
Note that the same hardware drivers are mentioned over and over. I don't know what driver is causing the problem, but by deleting or disabling...
Let us know how the recovery works out - and when you stop feeling crazed. :)
Thel easiest way to back up everything that you might want on your hard drive is to boot from the CD in the TI box and make a new image of your...
It's a lot better for everyone if you start your own thread rather than "hijack" a thread addressing someone else's problem. You have an...
You would boot from the TI Rescue CD (or flash drive) and select the backup image from the other HDD (the source). You would then select the new...
Well, your old drive was just one partition, the whole drive. Is that the way you want to use the new drive. That makes sense to me, but some...
Those are the most annoying. All you can do is hope it gets worse. :) Good luck until then.
OK, that's what happens if you select the entire drive to restore. No problem, you now know that you have a bootable new disk and a successful...
Good luck. I hope you can avoid the fresh install.
Until tech support comments, I'd uninstall the current installation, re-run the Cleanup utility, and do a new install to see if that fixes the...
OK, try deleting the jobs and then creating a new one. I was thinking of the English version numbers. Your English is so natural that I didn't...
I apologize. This did sound like a rather black market deal, but I shouldn't have made any assumptions. The problem is that the versions of TI...
Hi Psisco, Try CHKDSK d: /R where d: is the drive letter for the partition to be checked) as I suggested. It can be run from the Run command...
Try the drive plugged directly into the rear of the computer instead of on a hub. TI often doesn't like hubs. You could also unplug the drive...
I look forward to hearing more.
I've run out of ideas. I think I would try a clean install of Windows just to confirm that it does work on the system. This is very strange,...
If you registered your copy of TI on the Acronis web site, you can download the latest build from there. If you have the Serial number /...
Hmmm... Seems you are very annoyed that software that you don't own won't work for you. Under such circumstances such a self-righteous tone...
Re: Delll SAS 5/iR with RAID 1 I don't know, but booting the machine from the TI Rescue CD should answer the question quickly. If the drives are...
Did you delete the scheduled event before creating a new one? I would also strongly suggest updating to the current build of TI 2009. A lot of...
You are looking at the image backup. The image was made from the 500GB drive that failed. That's the 465GB image. The MBR and Track 0 are the...
1. When you try to boot your system from the Rescue CD, what happens? Do you see all your drives? 2. Were you able to restore your system...
If you boot from the Rescue CD, can you validate the backup? This is critical if you will have to do the restore from the Rescue CD because...
That's odd, but sometimes USB drives act in unusual ways with CHKDSK. Now that you have the drive out of the external drive case, you can...
Separate names with a comma.
