LNS mIRC rules placement and setup

I am currently using the 'official' LNS mIRC ruleset. Unfortunately, I have not had any luck in being able to send/receive files via mIRC DCC. I do know that the Server Auth rule goes above the TCP Block Incoming rule, and that works perfectly. It is the send/receive files via mIRC DCC portion of this ruleset that I am having trouble with, both in placement and setup.

Thank you very much for your assistance, in advance.

 

Hi mersdad

1- put an exclamation mark for each rule in the rule set to have an entry each time the rule is applied

2- in the option tab check the four log options

3- try Mirc again (to have some good samples in the log)

4- Upload here a copy of this log
The log is there:

5- makes a copy of your rules set, rename it by adding a trailing .TXT and upload it here (Button "manage attachment" ...)

We will see....

 

Hello Climenole,

Thanks very much for your very quick reply...https://www.wilderssecurity.com/images/editor/smilie.gif

I've done as you asked...sending my log file, which includes 2 failed DCC sends today. Also, I'm sending you my ruleset, which is Phant0m's with the LNS mIRC rules added/imported.

I'm quite sure my errors in setting up the mIRC rules will stick out like a sore thumb! https://www.wilderssecurity.com/images/smilies/smile.gif

Eager to hear back....

Thanks again. Mersdad

 

Hi mersdad


1)
What is this ? Did you have a router or a network ?
Did NetBios is enabled for nothings on your PC or what?

06-27-07,12:45:47 D-6141 'Block : All other packet' 192.168.0.1 UDP Ports Dest:rip=520 Src:rip=520
06-27-07,12:46:15 D-6143 'Block : All other packet' 192.168.0.1 UDP Ports Dest:rip=520 Src:rip=520
06-27-07,12:46:44 D-6145 'Block : All other packet' 192.168.0.1 UDP Ports Dest:rip=520 Src:rip=520
06-27-07,12:47:13 D-6146 'Block : All other packet' 192.168.0.1 UDP Ports Dest:rip=520 Src:rip=520
06-27-07,12:47:42 D-6148 'Block : All other packet' 192.168.0.1 UDP Ports Dest:rip=520 Src:rip=520
06-27-07,12:48:11 D-6149 'Block : All other packet' 192.168.0.1 UDP Ports Dest:rip=520 Src:rip=520

Routing Information Protocol...
http://en.wikipedia.org/wiki/Routing_Information_Protocol

2) MiRC is working! Look: packets in (+D) and out (+U) on right ports...:

06-27-07,12:48:36 U+6150 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:Irc2=6668 Src:1811
06-27-07,12:48:36 D+6151 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:1811 Src:Irc2=6668
06-27-07,12:48:36 U+6152 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:Irc2=6668 Src:1811
06-27-07,12:48:36 U+6153 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:Irc2=6668 Src:1811
06-27-07,12:48:36 D+6154 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:1811 Src:Irc2=6668
06-27-07,12:48:36 U+6155 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:Irc2=6668 Src:1811
06-27-07,12:48:36 D+6156 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:1811 Src:Irc2=6668
06-27-07,12:48:36 U+6157 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:Irc2=6668 Src:1811
06-27-07,12:48:36 U+6158 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:Irc2=6668 Src:1811
06-27-07,12:48:36 D+6159 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:1811 Src:Irc2=6668
06-27-07,12:48:36 D+6160 'mIRC : Chat & Send ' 64.18.128.86 TCP Ports Dest:1811 Src:Irc2=6668


I modify your rules anyway and put comments on the coresponding line.
Should be better...

Modified rules set here...

 

Climenole,

I just wanted to thank you for assisting me. Not only have you solved my prevailing mIRC issue(s) and edited (with comments!) my LNS ruleset, you've also educated me. For that, and all the above, I am most grateful.

Sincerely,

Mersdad

 

Hi mersdad

So MiRC problem solved: good.

About the other weird packets: forget that! I 've just realised that they are from outside (-D)... Strange but this is not from your PC and they are blocked by LnS ...