Error in True Image 9.1 Server (build 3.531) -> "not enough system resources"

Discussion in 'Acronis True Image Product Line' started by ralfonat, Mar 20, 2007.

Thread Status:
Not open for further replies.
  1. ralfonat

    ralfonat Registered Member

    Dec 14, 2006

    We have a backup task that does a fullbackup each week and diff backups every other day. The backup method is full disk (sectorwise). The source disk is a raid of 397GB currently holding 179GB.

    The backup target is a 300GB USB hd drive. The resulting fullbackup is about 150GB using normal compression. We have enabled the option to verify after backup.

    The machine is running win2k and has 4GB of ram.

    Sometimes the backup task fails with the following message(s):

    The acronis eventlog shows, that the error happens during the VERIFY backup phase. After 1-2 hours the error "Lesen der Daten von der Festplatte fehlgeschlagen. Eine mögliche Ursache können fehlerhafte Sektoren auf der Festplatte sein. :None" comes up. (Reading data from hard disk failed. Possible cause could be bad sectors.)

    If I accept the error via "OK", the following is logged:

    Read error (0x70003)
    Tag = 0x0
    Fehler beim Lesen der Datei. (0x40001)
    function = "ReadFile"
    Tag = 0x7CEB2CDC9FB11FF6
    Nicht genügend Systemressourcen, um den angeforderten Dienst auszuführen. (0xFFF0)
    code = FFFFFFFF800705AA
    Tag = 0xBD28FDBD64EDB816Aktion mit der Partition "0-0" wurde abgebrochen.

    (Error reading file. Not enough system resources to execute the requested service)

    - kongo
Thread Status:
Not open for further replies.