ti home 2009 - error code e00040007 - no s-ata harddisk

Discussion in 'Acronis True Image Product Line' started by jannemann, Mar 26, 2009.

Thread Status:
Not open for further replies.
  1. jannemann

    jannemann Registered Member

    Joined:
    Mar 26, 2009
    Posts:
    2
    hello,

    i have the following problem:

    i have a fujitsu siemens esprimo p2530 with one s-ata harddisk. there are two partitions (c and d). i made a complete backup of the first partition and saved the file on the second partition and on my external usb harddisk. i boot with the acronis loader and want to load my backup from d or from the external usb-device. everytime i get the error message: E00040007 the file can´t be loaded. i tried to load the backupfile from my external usb harddisk. when i opened the file, the external harddisk got the name "c:" but i should be "e." ??!!

    then i got in contact with the acronis support. i got a better boot cd. but with this boot cd i got the same error. i think the problem is that my s-ata harddisk will not be found when the computer boots?

    please, i need help.

    with best regards,
    jan
     
  2. jmk94903

    jmk94903 Registered Member

    Joined:
    Jul 10, 2004
    Posts:
    3,329
    Location:
    San Rafael, CA
    Tell Acronis support that the new boot CD still doesn't detect your SATA hard drive. See if they can find better drivers.

    The alternative is to make a VistaPE boot disk which will use Windows drivers. Mustang has a good utility for creating the VistaPE boot disk with True Image 2009 installed.
     
  3. jannemann

    jannemann Registered Member

    Joined:
    Mar 26, 2009
    Posts:
    2
    i got in contact again with acronis. i saved a file and sent it by email to the experts. maybe someone can help me too?

    Code:
    			*** Ramdisk build 41 ***
    
    $ cat /proc/version
    Linux version 2.6.27.4-acronis (del@acronis) (gcc version 4.3.2 4.3.2-sv-linbuild) #1 SMP Thu Feb 12 11:46:31 MSK 2009
    
    $ cat /proc/cmdline
    initrd=ramdisk.dat ramdisk_size=55884 vga=0x314 BOOT_IMAGE=kernel.dat 
    
    $ cat /proc/interrupts
               CPU0       CPU1       
      0:      53342      54449   IO-APIC-edge      timer
      1:          3          4   IO-APIC-edge      i8042
      4:          1          1   IO-APIC-edge    
      6:          1          3   IO-APIC-edge      floppy
      7:          1          0   IO-APIC-edge    
      9:          0          0   IO-APIC-fasteoi   acpi
     12:          3          5   IO-APIC-edge      i8042
     21:         59        115   IO-APIC-fasteoi   ehci_hcd:usb2
     22:        634        448   IO-APIC-fasteoi   ohci_hcd:usb1
    NMI:          0          0   Non-maskable interrupts
    LOC:      60593      57406   Local timer interrupts
    RES:        521        538   Rescheduling interrupts
    CAL:         89        140   function call interrupts
    TLB:         11          6   TLB shootdowns
    SPU:          0          0   Spurious interrupts
    ERR:          1
    MIS:          0
    
    $ cat /proc/modules
    dm_raid4_5 57740 0 - Live 0xf90de000
    dm_region_hash 8448 1 dm_raid4_5, Live 0xf8b50000
    raid456 115740 0 - Live 0xf9135000
    dm_log 8196 2 dm_raid4_5,dm_region_hash, Live 0xf8b4c000
    async_xor 2304 1 raid456, Live 0xf8af7000
    async_memcpy 1920 1 raid456, Live 0xf8af9000
    xor 14092 2 raid456,async_xor, Live 0xf8b43000
    dm_mod 41648 2 dm_raid4_5,dm_log, Live 0xf90c1000
    dm_message 2816 1 dm_raid4_5, Live 0xf8854000
    dm_mem_cache 3840 1 dm_raid4_5, Live 0xf8a5d000
    async_tx 2560 3 raid456,async_xor,async_memcpy, Live 0xf8850000
    af_packet 11520 0 - Live 0xf8b3f000
    usb_storage 66056 1 - Live 0xf9080000
    usbhid 17444 0 - Live 0xf8b09000
    xfs 396096 0 - Live 0xf91a5000
    nfs 206264 0 - Live 0xf9101000
    lockd 52728 1 nfs, Live 0xf9072000
    sunrpc 147324 4 nfs,lockd, Live 0xf909c000
    reiserfs 166708 0 - Live 0xf8b6b000
    nls_utf8 2048 2 - Live 0xf8a5f000
    jfs 139176 0 - Live 0xf8b95000
    ext3 83588 0 - Live 0xf8b55000
    jbd 35092 1 ext3, Live 0xf8a9b000
    isofs 20612 0 - Live 0xf8af0000
    vfat 9472 1 - Live 0xf8a79000
    fat 39712 1 vfat, Live 0xf8b30000
    ext2 40708 0 - Live 0xf8afe000
    sr_mod 13224 0 - Live 0xf8aad000
    ahci 26252 0 - Live 0xf8ae8000
    libata 128980 1 ahci, Live 0xf8b0f000
    ohci_hcd 19856 0 - Live 0xf8ab3000
    ehci_hcd 28428 0 - Live 0xf8aa5000
    udf 65420 0 - Live 0xf8ad7000
    ide_cd_mod 27012 0 - Live 0xf8a64000
    dock 7952 1 libata, Live 0xf8a61000
    crc_itu_t 2176 1 udf, Live 0xf8852000
    cdrom 29080 2 sr_mod,ide_cd_mod, Live 0xf8877000
    usbcore 104016 5 usb_storage,usbhid,ohci_hcd,ehci_hcd, Live 0xf8abc000
    forcedeth 45840 0 - Live 0xf8a6c000
    sd_mod 23576 1 - Live 0xf8a56000
    st 31388 0 - Live 0xf883e000
    sg 26548 0 - Live 0xf8848000
    scsi_mod 118268 6 usb_storage,sr_mod,libata,sd_mod,st,sg, Live 0xf8a7d000
    floppy 47636 0 - Live 0xf886a000
    ide_disk 10496 0 - Live 0xf882a000
    ide_pci_generic 3844 0 - Live 0xf881f000
    ide_core 74116 3 ide_cd_mod,ide_disk,ide_pci_generic, Live 0xf8856000
    psmouse 20488 0 - Live 0xf8837000
    snapapi26 26672 0 - Live 0xf882f000 (P)
    mousedev 10372 1 - Live 0xf8821000
    
    $ cat /proc/bus/pci/devices
    0000	10de07c1	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    0001	10de07cb	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    0008	10de07cd	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    0009	10de07ce	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    000a	10de07cf	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    000b	10de07d0	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    000c	10de07d1	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    000d	10de07d2	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    000e	10de07d3	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    0010	10de07d6	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    0018	10de07d7	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    0019	10de07d8	b	            3081	               0	               0	               0	            3041	            3001	               0	              40	               0	               0	               0	              40	              40	               0	
    001c	10de07c8	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    0020	10de07fe	16	        fe206000	               0	               0	               0	               0	               0	               0	            1000	               0	               0	               0	               0	               0	               0	ohci_hcd
    0021	10de056a	15	        fe208000	               0	               0	               0	               0	               0	               0	             100	               0	               0	               0	               0	               0	               0	ehci_hcd
    0048	10de07fc	b	        fe200000	               0	               0	               0	               0	               0	               0	            4000	               0	               0	               0	               0	               0	               0	
    0050	10de056d	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	
    0058	10de056e	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	pcieport-driver
    0060	10de056f	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	pcieport-driver
    0068	10de056f	0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	               0	pcieport-driver
    0070	10de07f0	0	             1f0	             3f6	             170	             376	            30c1	        fe204000	               0	               8	               0	               8	               0	              10	            2000	               0	ahci
    0078	10de07dc	17	        fe207000	            30d1	        fe208800	        fe208400	               0	               0	               0	            1000	               8	             100	              10	               0	               0	               0	forcedeth
    0080	10de07e1	b	        fd000000	        e000000c	               0	        fc000004	               0	               0	        88000002	         1000000	        10000000	               0	         1000000	               0	               0	           20000	
    
    $ cat /proc/bus/usb/devices
    
    T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh=10
    B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
    D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=1d6b ProdID=0002 Rev= 2.06
    S:  Manufacturer=Linux 2.6.27.4-acronis ehci_hcd
    S:  Product=EHCI Host Controller
    S:  SerialNumber=0000:00:04.1
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
    
    T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=1307 ProdID=0165 Rev= 1.00
    S:  Manufacturer=USBest Technology
    S:  Product=USB Mass Storage Device
    S:  SerialNumber=08062300003122
    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=16ms
    
    T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh=10
    B:  Alloc= 28/900 us ( 3%), #Int=  3, #Iso=  0
    D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=1d6b ProdID=0001 Rev= 2.06
    S:  Manufacturer=Linux 2.6.27.4-acronis ohci_hcd
    S:  Product=OHCI Host Controller
    S:  SerialNumber=0000:00:04.0
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
    
    T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=1.5 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=046d ProdID=c018 Rev=43.01
    S:  Manufacturer=Logitech
    S:  Product=USB Optical Mouse
    C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
    E:  Ad=81(I) Atr=03(Int.) MxPS=   5 Ivl=10ms
    
    T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  6 Spd=1.5 MxCh= 0
    D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=0bf8 ProdID=1004 Rev= 0.01
    S:  Manufacturer=Fujitsu Siemens Computers GmbH
    S:  Product=FSC KB USB
    C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
    E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
    I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
    E:  Ad=82(I) Atr=03(Int.) MxPS=   2 Ivl=160ms
    
    $ cat /proc/partitions
    major minor  #blocks  name
    
       8     0    1974272 sda
    
    $ cat /proc/scsi/scsi
    Attached devices:
    Host: scsi4 Channel: 00 Id: 00 Lun: 00
      Vendor: Ut165    Model: USB2FlashStorage Rev: 0.00
      Type:   Direct-Access                    ANSI  SCSI revision: 02
    $ dmesg
    <5>Linux version 2.6.27.4-acronis (del@acronis) (gcc version 4.3.2 4.3.2-sv-linbuild) #1 SMP Thu Feb 12 11:46:31 MSK 2009
    <6>BIOS-provided physical RAM map:
    <6> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    <6> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    <6> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    <6> BIOS-e820: 0000000000100000 - 000000005ffe0000 (usable)
    <6> BIOS-e820: 000000005ffe0000 - 000000005ffe4000 (ACPI data)
    <6> BIOS-e820: 000000005ffe4000 - 000000005ffe5000 (ACPI NVS)
    <6> BIOS-e820: 000000005ffe5000 - 0000000070000000 (reserved)
    <6> BIOS-e820: 0000000070000000 - 000000007ff00000 (usable)
    <6> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
    <6> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    <6> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    <6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    <6> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    <6>last_pfn = 0x7ff00 max_arch_pfn = 0x100000
    <7>kernel direct mapping tables up to 38000000 @ 7000-c000
    <6>RAMDISK: 5e0c0000 - 5ffbfbd5
    <6>Allocated new RAMDISK: 00361000 - 02260bd5
    <6>Move RAMDISK from 000000005e0c0000 - 000000005ffbfbd4 to 00361000 - 02260bd4
    <6>DMI present.
    <4>ACPI: RSDP 000F8310, 0014 (r0 PTLTD )
    <4>ACPI: RSDT 5FFE19C1, 004C (r1 FSC    PC          60000  LTP        0)
    <4>ACPI: FACP 5FFE3A66, 0074 (r1 FSC                60000         F4240)
    <4>ACPI: DSDT 5FFE1A0D, 2059 (r1 FSC    D2740/A1    60000 MSFT  3000001)
    <4>ACPI: FACS 5FFE4FC0, 0040
    <4>ACPI: SSDT 5FFE3ADA, 007A (r1 FSC    CST_CPU0    60000  CSF        1)
    <4>ACPI: SSDT 5FFE3B54, 007A (r1 FSC    CST_CPU1    60000  CSF        1)
    <4>ACPI: SSDT 5FFE3BCE, 00D7 (r1 FSC    PST_CPU0    60000  CSF        1)
    <4>ACPI: SSDT 5FFE3CA5, 00D7 (r1 FSC    PST_CPU1    60000  CSF        1)
    <4>ACPI: SLIC 5FFE3D7C, 0176 (r1 FSC    PC          60000  LTP        0)
    <4>ACPI: MCFG 5FFE3EF2, 003C (r1 PTLTD    MCFG      60000  LTP        0)
    <4>ACPI: HPET 5FFE3F2E, 0038 (r1 PTLTD  HPETTBL     60000  LTP        1)
    <4>ACPI: APIC 5FFE3F66, 0072 (r1 PTLTD  	 APIC      60000  LTP        0)
    <4>ACPI: BOOT 5FFE3FD8, 0028 (r1 PTLTD  $SBFTBL$    60000  LTP        1)
    <5>ACPI: DMI detected: Fujitsu Siemens
    <5>1151MB HIGHMEM available.
    <5>896MB LOWMEM available.
    <6>  mapped low ram: 0 - 38000000
    <6>  low ram: 00000000 - 38000000
    <6>  bootmap 00008000 - 0000f000
    <6>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
    <6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    <6>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    <6>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    <6>  #3 [0000100000 - 000035e610]    TEXT DATA BSS ==> [0000100000 - 000035e610]
    <6>  #4 [000035f000 - 0000361000]    INIT_PG_TABLE ==> [000035f000 - 0000361000]
    <6>  #5 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
    <6>  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
    <6>  #7 [0000361000 - 0002260bd5]      NEW RAMDISK ==> [0000361000 - 0002260bd5]
    <6>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
    <6>found SMP MP-table at [c00f8340] 000f8340
    <4>Zone PFN ranges:
    <4>  DMA      0x00000000 -> 0x00001000
    <4>  Normal   0x00001000 -> 0x00038000
    <4>  HighMem  0x00038000 -> 0x0007ff00
    <4>Movable zone start PFN for each node
    <4>early_node_map[3] active PFN ranges
    <4>    0: 0x00000000 -> 0x0000009d
    <4>    0: 0x00000100 -> 0x0005ffe0
    <4>    0: 0x00070000 -> 0x0007ff00
    <7>On node 0 totalpages: 458365
    <7>free_area_init_node: node 0, pgdat c02df400, node_mem_map c2261000
    <7>  DMA zone: 3965 pages, LIFO batch:0
    <7>  Normal zone: 223520 pages, LIFO batch:31
    <7>  HighMem zone: 226786 pages, LIFO batch:31
    <6>Using APIC driver default
    <6>ACPI: PM-Timer IO Port: 0x1008
    <7>ACPI: Local APIC address 0xfee00000
    <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    <6>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    <7>ACPI: IRQ0 used by override.
    <7>ACPI: IRQ2 used by override.
    <7>ACPI: IRQ9 used by override.
    <4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
    <6>Using ACPI (MADT) for SMP configuration information
    <7>mapped APIC to ffffb000 (fee00000)
    <7>mapped IOAPIC to ffffa000 (fec00000)
    <6>Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
    <6>PERCPU: Allocating 35740 bytes of per cpu data
    <7>NR_CPUS: 4, nr_cpu_ids: 4, nr_node_ids 1
    <4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 454271
    <5>Kernel command line: initrd=ramdisk.dat ramdisk_size=55884 vga=0x314 BOOT_IMAGE=kernel.dat 
    <6>Enabling fast FPU save and restore... done.
    <6>Enabling unmasked SIMD FPU exception support... done.
    <6>Initializing CPU#0
    <4>PID hash table entries: 4096 (order: 12, 16384 bytes)
    <6>TSC: PIT calibration confirmed by PMTIMER.
    <6>TSC: using PIT calibration value
    <4>Detected 2199.884 MHz processor.
    <7>spurious 8259A interrupt: IRQ7.
    <4>Console: colour dummy device 80x25
    <6>console [tty0] enabled
    <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    <6>Memory: 1780992k/2096128k available (1396k kernel code, 51480k reserved, 567k data, 252k init, 916352k highmem)
    <6>virtual kernel memory layout:
    <6>    fixmap  : 0xfff84000 - 0xfffff000   ( 492 kB)
    <6>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    <6>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    <6>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
    <6>      .init : 0xc02f2000 - 0xc0331000   ( 252 kB)
    <6>      .data : 0xc025d151 - 0xc02eb0a0   ( 567 kB)
    <6>      .text : 0xc0100000 - 0xc025d151   (1396 kB)
    <6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
    <7>CPA: page pool initialized 1 of 1 pages preallocated
    <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.76 BogoMIPS (lpj=8799536)
    <4>Mount-cache hash table entries: 512
    <6>CPU: L1 I cache: 32K, L1 D cache: 32K
    <6>CPU: L2 cache: 1024K
    <6>CPU: Physical Processor ID: 0
    <6>CPU: Processor Core ID: 0
    <6>using mwait in idle threads.
    <6>Checking 'hlt' instruction... OK.
    <6>Freeing SMP alternatives: 14k freed
    <6>ACPI: Core revision 20080609
    <4>ENABLING IO-APIC IRQs
    <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    <6>CPU0: Intel(R) Pentium(R) Dual  CPU  E2200  @ 2.20GHz stepping 0d
    <6>Booting processor 1/1 ip 6000
    <6>Initializing CPU#1
    <6>Calibrating delay using timer specific routine.. 4400.15 BogoMIPS (lpj=8800308)
    <6>CPU: L1 I cache: 32K, L1 D cache: 32K
    <6>CPU: L2 cache: 1024K
    <6>CPU: Physical Processor ID: 0
    <6>CPU: Processor Core ID: 1
    <6>CPU1: Intel(R) Pentium(R) Dual  CPU  E2200  @ 2.20GHz stepping 0d
    <6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    <6>Brought up 2 CPUs
    <6>Total of 2 processors activated (8799.92 BogoMIPS).
    <6>net_namespace: 296 bytes
    <6>NET: Registered protocol family 16
    <6>ACPI: bus type pci registered
    <5>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 4
    <5>PCI: MCFG area at f8000000 reserved in E820
    <6>PCI: Using MMCONFIG for extended config space
    <6>PCI: Using configuration type 1 for base access
    <7>ACPI: EC: Look up EC in DSDT
    <6>ACPI: Interpreter enabled
    <6>ACPI: (supports S0 S5)
    <6>ACPI: Using IOAPIC for interrupt routing
    <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
    <7>PCI: 0000:00:03.1 reg 10 io port: [3080, 30bf]
    <7>PCI: 0000:00:03.1 reg 20 io port: [3040, 307f]
    <7>PCI: 0000:00:03.1 reg 24 io port: [3000, 303f]
    <6>pci 0000:00:03.1: PME# supported from D3hot D3cold
    <6>pci 0000:00:03.1: PME# disabled
    <7>PCI: 0000:00:04.0 reg 10 32bit mmio: [fe206000, fe206fff]
    <7>pci 0000:00:04.0: supports D1
    <7>pci 0000:00:04.0: supports D2
    <6>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    <6>pci 0000:00:04.0: PME# disabled
    <7>PCI: 0000:00:04.1 reg 10 32bit mmio: [fe208000, fe2080ff]
    <7>pci 0000:00:04.1: supports D1
    <7>pci 0000:00:04.1: supports D2
    <6>pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    <6>pci 0000:00:04.1: PME# disabled
    <7>PCI: 0000:00:09.0 reg 10 32bit mmio: [fe200000, fe203fff]
    <6>pci 0000:00:09.0: PME# supported from D3hot D3cold
    <6>pci 0000:00:09.0: PME# disabled
    <6>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
    <6>pci 0000:00:0b.0: PME# disabled
    <6>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    <6>pci 0000:00:0c.0: PME# disabled
    <6>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
    <6>pci 0000:00:0d.0: PME# disabled
    <7>PCI: 0000:00:0e.0 reg 20 io port: [30c0, 30cf]
    <7>PCI: 0000:00:0e.0 reg 24 32bit mmio: [fe204000, fe205fff]
    <7>PCI: 0000:00:0f.0 reg 10 32bit mmio: [fe207000, fe207fff]
    <7>PCI: 0000:00:0f.0 reg 14 io port: [30d0, 30d7]
    <7>PCI: 0000:00:0f.0 reg 18 32bit mmio: [fe208800, fe2088ff]
    <7>PCI: 0000:00:0f.0 reg 1c 32bit mmio: [fe208400, fe20840f]
    <7>pci 0000:00:0f.0: supports D1
    <7>pci 0000:00:0f.0: supports D2
    <6>pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
    <6>pci 0000:00:0f.0: PME# disabled
    <7>PCI: 0000:00:10.0 reg 10 32bit mmio: [fd000000, fdffffff]
    <7>PCI: 0000:00:10.0 reg 14 32bit mmio: [e0000000, efffffff]
    <7>PCI: 0000:00:10.0 reg 1c 64bit mmio: [fc000000, fcffffff]
    <7>PCI: 0000:00:10.0 reg 30 32bit mmio: [0, 1ffff]
    <6>pci 0000:00:0a.0: transparent bridge
    <7>bus 00 -> node 0
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14 15) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14 15) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 14 15) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 14 15) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKF] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKG] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKH] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKI] (IRQs 16 17 18 19 20 21 22 23) *5
    <6>ACPI: PCI Interrupt Link [LNKJ] (IRQs 16 17 18 19 20 21 22 23) *10
    <6>ACPI: PCI Interrupt Link [LNKK] (IRQs 16 17 18 19 20 21 22 23) *11
    <6>ACPI: PCI Interrupt Link [LNKL] (IRQs 16 17 18 19 20 21 22 23) *11
    <6>ACPI: PCI Interrupt Link [LNKM] (IRQs 16 17 18 19 20 21 22 23) *11
    <6>ACPI: PCI Interrupt Link [LNKN] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKO] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKP] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    <6>ACPI: PCI Interrupt Link [LNKQ] (IRQs 16 17 18 19 20 21 22 23) *11
    <6>ACPI: PCI Interrupt Link [LNKR] (IRQs 16 17 18 19 20 21 22 23) *0
    <6>Linux Plug and Play Support v0.97 (c) Adam Belay
    <6>pnp: PnP ACPI init
    <6>ACPI: bus type pnp registered
    <6>pnp: PnP ACPI: found 9 devices
    <6>ACPI: ACPI bus type pnp unregistered
    <6>PCI: Using ACPI for IRQ routing
    <6>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
    <6>system 00:01: ioport range 0x810-0x810 has been reserved
    <6>system 00:01: ioport range 0x1000-0x10e7 has been reserved
    <6>system 00:01: ioport range 0x1400-0x14fe has been reserved
    <6>system 00:01: ioport range 0x1800-0x18fe has been reserved
    <6>system 00:01: ioport range 0x1900-0x19fe has been reserved
    <6>system 00:01: ioport range 0x1a00-0x1afe has been reserved
    <6>system 00:01: ioport range 0x1b00-0x1b0e has been reserved
    <6>system 00:01: ioport range 0x1c00-0x1cfe has been reserved
    <6>system 00:01: ioport range 0xfe00-0xfe00 has been reserved
    <6>system 00:01: ioport range 0xff00-0xff00 has been reserved
    <6>system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
    <6>system 00:01: iomem range 0xfec00000-0xfecfffff could not be reserved
    <6>system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
    <6>system 00:01: iomem range 0xfef80000-0xfef80fff has been reserved
    <2>Loading, please wait...
    <6>pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
    <6>pci 0000:00:0a.0:   IO window: disabled
    <6>pci 0000:00:0a.0:   MEM window: disabled
    <6>pci 0000:00:0a.0:   PREFETCH window: disabled
    <6>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
    <6>pci 0000:00:0b.0:   IO window: disabled
    <6>pci 0000:00:0b.0:   MEM window: disabled
    <6>pci 0000:00:0b.0:   PREFETCH window: disabled
    <6>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
    <6>pci 0000:00:0c.0:   IO window: disabled
    <6>pci 0000:00:0c.0:   MEM window: disabled
    <6>pci 0000:00:0c.0:   PREFETCH window: disabled
    <6>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
    <6>pci 0000:00:0d.0:   IO window: disabled
    <6>pci 0000:00:0d.0:   MEM window: disabled
    <6>pci 0000:00:0d.0:   PREFETCH window: disabled
    <7>pci 0000:00:0a.0: setting latency timer to 64
    <7>pci 0000:00:0b.0: setting latency timer to 64
    <7>pci 0000:00:0c.0: setting latency timer to 64
    <7>pci 0000:00:0d.0: setting latency timer to 64
    <6>bus: 00 index 0 io port: [0, ffff]
    <6>bus: 00 index 1 mmio: [0, ffffffff]
    <6>bus: 01 index 0 mmio: [0, 0]
    <6>bus: 01 index 1 mmio: [0, 0]
    <6>bus: 01 index 2 mmio: [0, 0]
    <6>bus: 01 index 3 io port: [0, ffff]
    <6>bus: 01 index 4 mmio: [0, ffffffff]
    <6>bus: 02 index 0 mmio: [0, 0]
    <6>bus: 02 index 1 mmio: [0, 0]
    <6>bus: 02 index 2 mmio: [0, 0]
    <6>bus: 02 index 3 mmio: [0, 0]
    <6>bus: 03 index 0 mmio: [0, 0]
    <6>bus: 03 index 1 mmio: [0, 0]
    <6>bus: 03 index 2 mmio: [0, 0]
    <6>bus: 03 index 3 mmio: [0, 0]
    <6>bus: 04 index 0 mmio: [0, 0]
    <6>bus: 04 index 1 mmio: [0, 0]
    <6>bus: 04 index 2 mmio: [0, 0]
    <6>bus: 04 index 3 mmio: [0, 0]
    <6>NET: Registered protocol family 2
    <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    <6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    <6>TCP: Hash tables configured (established 131072 bind 65536)
    <6>TCP reno registered
    <6>NET: Registered protocol family 1
    <6>checking if image is initramfs... it is
    <6>Freeing initrd memory: 31742k freed
    <6>Simple Boot Flag at 0x3b set to 0x1
    <4>highmem bounce pool size: 64 pages
    <6>msgmni has been set to 1752
    <6>io scheduler noop registered
    <6>io scheduler deadline registered (default)
    <7>pci 0000:00:10.0: Boot video device
    <7>pcieport-driver 0000:00:0b.0: setting latency timer to 64
    <6>pcieport-driver 0000:00:0b.0: found MSI capability
    <7>pci_express 0000:00:0b.0:pcie00: allocate port service
    <7>pci_express 0000:00:0b.0:pcie03: allocate port service
    <7>pcieport-driver 0000:00:0c.0: setting latency timer to 64
    <6>pcieport-driver 0000:00:0c.0: found MSI capability
    <7>pci_express 0000:00:0c.0:pcie00: allocate port service
    <7>pci_express 0000:00:0c.0:pcie03: allocate port service
    <7>pcieport-driver 0000:00:0d.0: setting latency timer to 64
    <6>pcieport-driver 0000:00:0d.0: found MSI capability
    <7>pci_express 0000:00:0d.0:pcie00: allocate port service
    <7>pci_express 0000:00:0d.0:pcie03: allocate port service
    <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    <6>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 1875k, total 262144k
    <6>vesafb: mode is 800x600x16, linelength=1600, pages=2
    <6>vesafb: protected mode interface info at c000:c400
    <6>vesafb: pmi: set display start = c00cc436, set palette = c00cc4a0
    <6>vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 
    <6>vesafb: scrolling: redraw
    <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    <4>Console: switching to colour frame buffer device 100x37
    <6>fb0: VESA VGA frame buffer device
    <6>ACPI: CPU0 (power states: C1[C1] C2[C2])
    <6>processor ACPI0007:00: registered as cooling_device0
    <6>ACPI: CPU1 (power states: C1[C1] C2[C2])
    <6>processor ACPI0007:01: registered as cooling_device1
    <4>Marking TSC unstable due to possible TSC halt in C2
    <6>Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    <6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    <6>brd: module loaded
    <6>PNP: No PS/2 controller found. Probing ports directly.
    <6>serio: i8042 KBD port at 0x60,0x64 irq 1
    <6>serio: i8042 AUX port at 0x60,0x64 irq 12
    <6>input: PC Speaker as /class/input/input0
    <6>TCP cubic registered
    <4>Using IPI Shortcut mode
    <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
    <6>Freeing unused kernel memory: 252k freed
    <4>Checking for graphic mode...
    <4>Using /lib/modules/mousedev.ko
    <6>mice: PS/2 mouse device common for all mice
    <4>Detecting mouse...
    <4>$ /bin/gpm -R -m /dev/mice -t imps2
    <4>Using /lib/modules/snapapi26.ko
    <4>snapapi26: module license 'Proprietary' taints kernel.
    <6>snapapi_init: Snapapi(v.0.7.43) init OK. Session size 6824.
    <4>Using /lib/modules/psmouse.ko
    <4>Using /lib/modules/ide-core.ko
    <6>Uniform Multi-Platform E-IDE driver
    <4>Using /lib/modules/ide-pci-generic.ko
    <4>Using /lib/modules/ide-disk.ko
    <4>Using /lib/modules/floppy.ko
    <4>Using /lib/modules/scsi_mod.ko
    <5>SCSI subsystem initialized
    <6>FDC 0 is a post-1991 82077
    <4>floppy0: unexpected interrupt 
    <4>floppy0: sensei repl[0]=80 
    <4>Using /lib/modules/sd_mod.ko
    <4>Using /lib/modules/sg.ko
    <4>Using /lib/modules/st.ko
    <6>st: Version 20080504, fixed bufsize 32768, s/g segs 256
    <4>Driver 'st' needs updating - please use bus_type methods
    <4>Driver 'sd' needs updating - please use bus_type methods
    <4>Using /lib/modules/forcedeth.ko
    <4>Using /lib/modules/usbcore.ko
    <6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
    <4>ACPI: PCI Interrupt Link [LNKL] enabled at IRQ 23
    <6>forcedeth 0000:00:0f.0: PCI INT A -> Link[LNKL] -> GSI 23 (level, high) -> IRQ 23
    <7>forcedeth 0000:00:0f.0: setting latency timer to 64
    <4>Using /lib/modules/cdrom.ko
    <6>usbcore: registered new interface driver usbfs
    <4>Using /lib/modules/crc-itu-t.ko
    <4>Using /lib/modules/dock.ko
    <4>Using /lib/modules/ide-cd_mod.ko
    <6>usbcore: registered new interface driver hub
    <4>Using /lib/modules/udf.ko
    <6>usbcore: registered new device driver usb
    <6>No dock devices found.
    <4>Using /lib/modules/acpiphp.ko
    <4>Using /lib/modules/ehci-hcd.ko
    <4>Using /lib/modules/ohci-hcd.ko
    <6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    <4>Using /lib/modules/libata.ko
    <7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    <7>libata version 3.00 loaded.
    <4>insmod: error inserting '/lib/modules/acpiphp.ko': -1 Unknown error 19
    <4>
    <4>Using /lib/modules/ahci.ko
    <4>Using /lib/modules/sr_mod.ko
    <4>Driver 'sr' needs updating - please use bus_type methods
    <4>Using /lib/modules/ext2.ko
    <4>Using /lib/modules/fat.ko
    <4>Using /lib/modules/vfat.ko
    <4>Using /lib/modules/isofs.ko
    <4>Using /lib/modules/jbd.ko
    <4>Using /lib/modules/ext3.ko
    <4>Using /lib/modules/jfs.ko
    <6>JFS: nTxBlock = 8192, nTxLock = 65536
    <4>Using /lib/modules/nls_utf8.ko
    <4>Using /lib/modules/reiserfs.ko
    <4>Using /lib/modules/sunrpc.ko
    <6>RPC: Registered udp transport module.
    <6>RPC: Registered tcp transport module.
    <4>Using /lib/modules/lockd.ko
    <4>Using /lib/modules/nfs.ko
    <4>Using /lib/modules/xfs.ko
    <6>SGI XFS with security attributes, large block numbers, no debug enabled
    <6>forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:99:53:64:a2
    <6>forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
    <4>ACPI: PCI Interrupt Link [LNKJ] enabled at IRQ 22
    <6>ohci_hcd 0000:00:04.0: PCI INT A -> Link[LNKJ] -> GSI 22 (level, high) -> IRQ 22
    <7>ohci_hcd 0000:00:04.0: setting latency timer to 64
    <6>ohci_hcd 0000:00:04.0: OHCI Host Controller
    <6>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
    <6>ohci_hcd 0000:00:04.0: irq 22, io mem 0xfe206000
    <6>usb usb1: configuration #1 chosen from 1 choice
    <4>$ /bin/mount -t usbfs usbfs /proc/bus/usb
    <6>hub 1-0:1.0: USB hub found
    <4>$ /bin/mount -t usbfs usbfs /proc/bus/usb
    <6>hub 1-0:1.0: 10 ports detected
    <4>Mounting usbfs on /proc/bus/usb failed
    <4>ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 21
    <6>ehci_hcd 0000:00:04.1: PCI INT B -> Link[LNKI] -> GSI 21 (level, high) -> IRQ 21
    <7>ehci_hcd 0000:00:04.1: setting latency timer to 64
    <6>ehci_hcd 0000:00:04.1: EHCI Host Controller
    <6>usb 1-1: new low speed USB device using ohci_hcd and address 2
    <6>usb 1-1: configuration #1 chosen from 1 choice
    <6>usb 1-2: new low speed USB device using ohci_hcd and address 3
    <6>usb 1-2: configuration #1 chosen from 1 choice
    <6>usb 1-4: new full speed USB device using ohci_hcd and address 4
    <6>usb 1-4: configuration #1 chosen from 1 choice
    <6>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
    <4>Using /lib/modules/usbhid.ko
    <6>ehci_hcd 0000:00:04.1: debug port 1
    <7>ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
    <6>ehci_hcd 0000:00:04.1: irq 21, io mem 0xfe208000
    <4>Using /lib/modules/usb-storage.ko
    <4>Using /lib/modules/usb-storage.ko
    <4>Using /lib/modules/usb-storage.ko
    <4>Using /lib/modules/usbhid.ko
    <4>Using /lib/modules/usbhid.ko
    <6>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    <4>Using /lib/modules/usbhid.ko
    <4>Using /lib/modules/usb-storage.ko
    <4>Using /lib/modules/usbhid.ko
    <6>usb 1-1: USB disconnect, address 2
    <6>usb usb2: configuration #1 chosen from 1 choice
    <4>Using /lib/modules/usb-storage.ko
    <4>Using /lib/modules/usb-storage.ko
    <4>Using /lib/modules/usbhid.ko
    <4>Using /lib/modules/usb-storage.ko
    <4>Using /lib/modules/usbhid.ko
    <6>hub 2-0:1.0: USB hub found
    <6>hub 2-0:1.0: 10 ports detected
    <6>Initializing USB Mass Storage driver...
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>
    <4>
    <6>usb 1-2: USB disconnect, address 3
    <7>ahci 0000:00:0e.0: version 3.0
    <6>ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
    <6>ahci 0000:00:0e.0: flags: 64bit sntf led clo pmp pio 
    <7>ahci 0000:00:0e.0: setting latency timer to 64
    <4>------------[ cut here ]------------
    <4>WARNING: at drivers/ata/libata-core.c:5748 ata_host_activate+0x49/0xc3 [libata]()
    <4>Modules linked in: usb_storage(+) usbhid(+) xfs nfs lockd sunrpc reiserfs nls_utf8 jfs ext3 jbd isofs vfat fat ext2 sr_mod ahci(+) libata ohci_hcd(+) ehci_hcd(+) udf ide_cd_mod dock crc_itu_t cdrom usbcore forcedeth sd_mod st sg scsi_mod floppy ide_disk ide_pci_generic ide_core psmouse snapapi26(P) mousedev
    <4>Pid: 2464, comm: acronis Tainted: P          2.6.27.4-acronis #1
    <4> [<c0118426>] warn_on_slowpath+0x40/0x63
    <4> [<c01060eb>] dma_alloc_coherent+0xd8/0x221
    <4> [<c01ed60a>] <6>usb 1-4: USB disconnect, address 4
    <4>devres_add+0x1b/0x51
    <4> [<c01ee31f>] dmam_alloc_coherent+0x66/0x6f
    <4> [<c01ed60a>] devres_add+0x1b/0x51
    <4> [<f8b105de>] ata_host_start+0xfb/0x12f [libata]
    <4> [<f8b14aba>] ata_host_activate+0x49/0xc3 [libata]
    <4> [<f8ae9f10>] ahci_interrupt+0x0/0x434 [ahci]
    <4> [<f8ae9efb>] ahci_init_one+0x8be/0x8d3 [ahci]
    <4> [<c019d76f>] pci_device_probe+0x36/0x55
    <4> [<c01ec20c>] driver_probe_device+0x9d/0x12f
    <4> [<c01ec2d5>] __driver_attach+0x37/0x55
    <4> [<c01ebc8b>] bus_for_each_dev+0x35/0x5c
    <4> [<c01ec0bf>] driver_attach+0x11/0x13
    <4> [<c01ec29e>] __driver_attach+0x0/0x55
    <4> [<c01eb70e>] bus_add_driver+0x91/0x1a7
    <4> [<f8854000>] ahci_init+0x0/0x14 [ahci]
    <4> [<c01ec439>] driver_register+0x7d/0xd6
    <4> [<f8854000>] ahci_init+0x0/0x14 [ahci]
    <4> [<c019d933>] __pci_register_driver+0x3c/0x69
    <4> [<c0101037>] do_one_initcall+0x37/0xfb
    <4> [<c010c2f4>] native_smp_send_reschedule+0x44/0x45
    <4> [<c0110f31>] resched_task+0x58/0x5a
    <4> [<c0114721>] try_to_wake_up+0x154/0x15d
    <4> [<c01333d0>] sys_init_module+0x87/0x174
    <4> [<c0102d46>] syscall_call+0x7/0xb
    <4> [<c0250000>] __xfrm_state_insert+0x16b/0x1f4
    <4> =======================
    <4>---[ end trace 4f2bd77a85c2a4aa ]---
    <6>scsi0 : ahci
    <6>scsi1 : ahci
    <6>scsi2 : ahci
    <6>scsi3 : ahci
    <6>ata1: SATA max UDMA/133 abar m8192@0xfe204000 port 0xfe204100
    <6>ata2: SATA max UDMA/133 abar m8192@0xfe204000 port 0xfe204180
    <6>ata3: SATA max UDMA/133 abar m8192@0xfe204000 port 0xfe204200
    <6>ata4: SATA max UDMA/133 abar m8192@0xfe204000 port 0xfe204280
    <6>usb 2-4: new high speed USB device using ehci_hcd and address 4
    <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    <6>usb 2-4: configuration #1 chosen from 1 choice
    <6>scsi4 : SCSI emulation for USB Mass Storage devices
    <6>usbcore: registered new interface driver usbhid
    <6>usbhid: v2.6:USB HID core driver
    <7>usb-storage: device found at 4
    <7>usb-storage: waiting for device to settle before scanning
    <6>usbcore: registered new interface driver usb-storage
    <6>USB Mass Storage support registered.
    <6>usb 1-1: new low speed USB device using ohci_hcd and address 5
    <6>usb 1-1: configuration #1 chosen from 1 choice
    <6>input: Logitech USB Optical Mouse as /class/input/input1
    <6>input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:04.0-1
    <6>usb 1-2: new low speed USB device using ohci_hcd and address 6
    <6>usb 1-2: configuration #1 chosen from 1 choice
    <6>input: Fujitsu Siemens Computers GmbH FSC KB USB as /class/input/input2
    <6>input: USB HID v1.10 Keyboard [Fujitsu Siemens Computers GmbH FSC KB USB] on usb-0000:00:04.0-2
    <6>input: Fujitsu Siemens Computers GmbH FSC KB USB as /class/input/input3
    <6>input: USB HID v1.10 Device [Fujitsu Siemens Computers GmbH FSC KB USB] on usb-0000:00:04.0-2
    <4>Using /lib/modules/usb-storage.ko
    <4>Using /lib/modules/usbhid.ko
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>
    <4>
    <4>Using /lib/modules/usb-storage.ko
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>
    <4>Using /lib/modules/usbhid.ko
    <4>Using /lib/modules/usb-storage.ko
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>Using /lib/modules/usbhid.ko
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>
    <4>Using /lib/modules/usb-storage.ko
    <4>Using /lib/modules/usbhid.ko
    <4>Using /lib/modules/usb-storage.ko
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>Using /lib/modules/usb-storage.ko
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>Using /lib/modules/usbhid.ko
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>Using /lib/modules/usbhid.ko
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>insmod: error inserting '/lib/modules/usb-storage.ko': -1 Unknown error 17
    <4>
    <4>
    <4>insmod: error inserting '/lib/modules/usbhid.ko': -1 Unknown error 17
    <4>
    <4>
    <4>
    <4>
    <4>
    <4>ata1.00: qc timeout (cmd 0xec)
    <4>ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    <5>scsi 4:0:0:0: Direct-Access     Ut165    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
    <5>sd 4:0:0:0: [sda] 3948544 512-byte hardware sectors (2022 MB)
    <5>sd 4:0:0:0: [sda] Write Protect is off
    <7>sd 4:0:0:0: [sda] Mode Sense: 00 00 00 00
    <4>sd 4:0:0:0: [sda] Assuming drive cache: write through
    <5>sd 4:0:0:0: [sda] 3948544 512-byte hardware sectors (2022 MB)
    <5>sd 4:0:0:0: [sda] Write Protect is off
    <7>sd 4:0:0:0: [sda] Mode Sense: 00 00 00 00
    <4>sd 4:0:0:0: [sda] Assuming drive cache: write through
    <6> sda:
    <5>sd 4:0:0:0: [sda] Attached SCSI removable disk
    <5>sd 4:0:0:0: Attached scsi generic sg0 type 0
    <7>usb-storage: device scan complete
    <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    <4>ata1.00: qc timeout (cmd 0xec)
    <4>ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    <4>ata1.00: qc timeout (cmd 0xec)
    <4>ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    <4>ata2.00: qc timeout (cmd 0xec)
    <4>ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
    <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    <4>ata2.00: qc timeout (cmd 0xec)
    <4>ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
    <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    <4>ata2.00: qc timeout (cmd 0xec)
    <4>ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
    <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    <6>ata3: SATA link down (SStatus 0 SControl 300)
    <6>ata4: SATA link down (SStatus 0 SControl 300)
    <4>Checking for network adapter...
    <4>Using /lib/modules/af_packet.ko
    <6>NET: Registered protocol family 17
    <4>$ /bin/ifconfig lo 127.0.0.1
    <4>$ /bin/ifconfig lo up
    <4>Using /lib/modules/async_tx.ko
    <4>Using /lib/modules/dm-mem-cache.ko
    <6>async_tx: api initialized (sync-only)
    <4>Using /lib/modules/dm-message.ko
    <4>Using /lib/modules/dm-mod.ko
    <4>Using /lib/modules/xor.ko
    <4>Using /lib/modules/async_memcpy.ko
    <6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
    <6>xor: automatically using best checksumming function: pIII_sse
    <6>   pIII_sse  :  8055.000 MB/sec
    <6>xor: using function: pIII_sse (8055.000 MB/sec)
    <4>Using /lib/modules/async_xor.ko
    <4>Using /lib/modules/dm-log.ko
    <4>Using /lib/modules/raid456.ko
    <4>Using /lib/modules/dm-region_hash.ko
    <4>raid6: int32x1    451 MB/s
    <4>raid6: int32x2    459 MB/s
    <4>raid6: int32x4    333 MB/s
    <4>raid6: int32x8    299 MB/s
    <4>raid6: mmxx1     1443 MB/s
    <4>raid6: mmxx2     1417 MB/s
    <4>raid6: sse1x1     943 MB/s
    <4>raid6: sse1x2    1198 MB/s
    <4>raid6: sse2x1    1689 MB/s
    <4>raid6: sse2x2    1833 MB/s
    <4>raid6: using algorithm sse2x2 (1833 MB/s)
    <6>md: raid6 personality registered for level 6
    <6>md: raid5 personality registered for level 5
    <6>md: raid4 personality registered for level 4
    <4>Using /lib/modules/dm-raid4-5.ko
    <6>device-mapper: dm-raid45: initialized v0.2427
    <4>$ /bin/dmraid -pay
    <4>$ /bin/mknod /dev/md0 b 9 0
    <4>$ /bin/raidautorun /dev/md0
    <6>md: Autodetecting RAID arrays.
    <6>md: Scanned 0 and added 0 devices.
    <6>md: autorun ...
    <6>md: ... autorun DONE.
    <4>$ /bin/lvm vgscan --mknodes --ignorelockingfailure
    <4>$ /bin/lvm vgchange -a y --ignorelockingfailure
    <4>$ /bin/udevstart
    <4>$ /bin/sh
    <4>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    <4>Unable to load NLS charset cp437
    <4>FAT: codepage cp437 not found
    
    $ lspci
    00:10.0 10de:07e1 1734:115b 03:00:00
    00:0f.0 10de:07dc 1734:115b 02:00:00 forcedeth
    00:0e.0 10de:07f0 1734:115b 01:01:80 ide-pci-generic ahci
    00:0d.0 10de:056f 0000:0000 06:04:00
    00:0c.0 10de:056f 0000:0000 06:04:00
    00:0b.0 10de:056e 0000:0000 06:04:00
    00:0a.0 10de:056d 0000:0000 06:04:01
    00:09.0 10de:07fc 1734:112c 04:03:00
    00:04.1 10de:056a 1734:115b 0c:03:20 ehci-hcd
    00:04.0 10de:07fe 1734:115b 0c:03:10 ohci-hcd
    00:03.4 10de:07c8 1734:115b 05:00:00
    00:03.1 10de:07d8 1734:115b 0c:05:00
    00:03.0 10de:07d7 1734:115b 06:01:00
    00:02.0 10de:07d6 1734:115b 05:00:00
    00:01.6 10de:07d3 1734:115b 05:00:00
    00:01.5 10de:07d2 1734:115b 05:00:00
    00:01.4 10de:07d1 1734:115b 05:00:00
    00:01.3 10de:07d0 1734:115b 05:00:00
    00:01.2 10de:07cf 1734:115b 05:00:00
    00:01.1 10de:07ce 1734:115b 05:00:00
    00:01.0 10de:07cd 1734:115b 05:00:00
    00:00.1 10de:07cb 1734:115b 05:00:00
    00:00.0 10de:07c1 1734:115b 06:00:00
    Modules: ahci ide-cd_mod ide-core ide-disk ide-pci-generic floppy scsi_mod sd_mod sg sr_mod st forcedeth ehci-hcd ohci-hcd usbcore usb-storage cdrom mousedev psmouse af_packet async_memcpy async_tx async_xor crc-itu-t dm-log dm-mem-cache dm-message dm-mod dm-raid4-5 dm-region_hash dock ext2 ext3 fat isofs jbd jfs libata lockd nfs nls_utf8 raid456 reiserfs snapapi26 sunrpc udf usbhid vfat xfs xor
    
    $ dmraid -r
    no block devices found
    
     
  4. jmk94903

    jmk94903 Registered Member

    Joined:
    Jul 10, 2004
    Posts:
    3,329
    Location:
    San Rafael, CA
    Check out the Mustang VistaPE boot disk. You can add the Windows Vista drivers for your SATA drives to that disk.
     
Thread Status:
Not open for further replies.