Rescue disk doesn't boot

Discussion in 'Acronis True Image Product Line' started by vince_nc, Oct 6, 2004.

Thread Status:
Not open for further replies.
  1. vince_nc

    vince_nc Registered Member

    Joined:
    Sep 4, 2004
    Posts:
    2
    Hi,
    Since I installed a 3112U SATA card in my system, I can no longer boot from the rescue CD created with TI 7.0 build 572.
    When booting from that cdrom the message "hdg : lost interrupt" appears indedinitely!
    Do you know how I can boot from that CD in order to restore an TI7 image?

    Thanks
     
  2. chas.large.oxon

    chas.large.oxon Registered Member

    Joined:
    Oct 6, 2004
    Posts:
    2
    Hi Vince.
    Can I suggest that as you could boot from this disk before the SATA card was installed, then there is nothing wrong with the disk.
    I would recommend upgrading TI to the latest build which will no doubt support the new card, and then make a new boot disk which should then enable a boot.
    I had a similar problem with a DELL PC, and upgrading the build cured the problem.
    Cheers
    Chas.

     
  3. vince_nc

    vince_nc Registered Member

    Joined:
    Sep 4, 2004
    Posts:
    2
    Hi Chas,

    Thanks for your post, i've upgraded my TI7 to build 638. I regenerated another boot cdrom. It works now. I can boot from it and restore images to my C: partition.
    I wanted to let you know.

    Have a good day
    Vince
     
Thread Status:
Not open for further replies.