Partition Mgr 11 linux BootCD loads slow

Discussion in 'Paragon Partition Manager Product Line' started by LudwigFischer, Jun 4, 2010.

Thread Status:
Not open for further replies.
  1. LudwigFischer

    LudwigFischer Registered Member

    Joined:
    Jun 4, 2010
    Posts:
    6
    Hello
    The Partition Manager 11 linux BootCD is slow loading.
    The first screen with moving bar at bottom needs 65 sec.
    The next blue screen needs 180 sec.
    After that, I get the screen for selecting working fine.
    My question: Is this normal, that loading needs over 4 minutes. o_O
    Thanks Ludwig
     
  2. SIW2

    SIW2 Registered Member

    Joined:
    Sep 6, 2009
    Posts:
    1,572
    It shouldn't take that long.

    Was that a single event, or have you tried it several times?
     
  3. LudwigFischer

    LudwigFischer Registered Member

    Joined:
    Jun 4, 2010
    Posts:
    6
    Hi
    It needs so long several times
    Measured on a SONY laptop with dualCPU and my desctop with quadCPU

    On the blue screen with Paragon, there is no graphic to show, that it works.
    Also, there is no harddisc lamp lighting.
    It seems, that it times out or something after 3 minutes.

    After the 3 minutes, all works perfect, no error
    Its only a question about the long time to wait

    Is there a newer version of PartMgr11 professional linux bootCD ISO available for download?
     
  4. SIW2

    SIW2 Registered Member

    Joined:
    Sep 6, 2009
    Posts:
    1,572
    If you have the Professional Edition, you can get the WinPE boot cd.

    Login to your account, Login to MyAccount go to the downloads section and you will see it there.
     
Loading...
Thread Status:
Not open for further replies.