Paragon Drive Backup 10: sometimes boots at startup pc

Discussion in 'Paragon Drive Backup Product Line' started by dabruna, Apr 15, 2010.

Thread Status:
Not open for further replies.
  1. dabruna

    dabruna Registered Member

    Joined:
    Apr 9, 2010
    Posts:
    20
    Why sometimes Paragon Drive Backup 10 free, at the startup of the pc, boots by itself (similar as I boot pc from a cd/dvd) without having request to do it ?
    In this case (several cases till nowadays) I have to press esc key to stop the process.
    Also this morning pc gave me "bad_pool_caller" error on blue screen.
    Why all this and above all, how to avoid it ?
    Thanks in advance.
    Danilo
     
  2. Paragon_Tommy

    Paragon_Tommy Paragon Moderator

    Joined:
    Aug 10, 2009
    Posts:
    918
    Did you have the bootable CD/DVD or USB inside or connected to the PC? Otherwise, did you queue up a task for the next restart? Depending on which screen are you booting up to, you can either remove the media or update the MBR to cancel pending task.
     
  3. dabruna

    dabruna Registered Member

    Joined:
    Apr 9, 2010
    Posts:
    20
    The special boot started with no usb connected neither have a boot cd/dvd on cd/dvd reader.
    In fact in the white screen was reported an errorr because Paragon did not find the drive ....).
    After having press esc the system (same as before: no usb no cd/dvd inserted) restarted normally with XP.
    This happens sometimes but not all the times I reboot the pc.

    How to fix MBR and above all how has been created this annoying situation ?

    Thanks
     
  4. Paragon_Tommy

    Paragon_Tommy Paragon Moderator

    Joined:
    Aug 10, 2009
    Posts:
    918
    In DB 10, under "Hard Disk" "Update MBR".
     
  5. dabruna

    dabruna Registered Member

    Joined:
    Apr 9, 2010
    Posts:
    20
    Very dangerous update ....
    Not be done until having made at least two copies on different disks of the system disk ....
    I shall try later.
    Thanks
     
  6. dabruna

    dabruna Registered Member

    Joined:
    Apr 9, 2010
    Posts:
    20
    In scheduled Task window and in archives, where is the destination disk field ?

    http://img402.imageshack.us/img402/8015/sched01.jpg

    And where is the dimension of archives field ?

    Possbile an option to clean the erased archives (those in grey color) automatically fixing the database at once ?

    Am I boring you ?
    Thanks
    Danilo
     
    Last edited: Apr 17, 2010
Loading...
Thread Status:
Not open for further replies.