Nero - new and stuck :(

Discussion in 'other software & services' started by shell2909, Jul 13, 2009.

Thread Status:
Not open for further replies.
  1. shell2909

    shell2909 Registered Member

    Joined:
    Jul 13, 2009
    Posts:
    2
    hi
    i dont know where to put this but i have nero 7 and i hjave been trying to burn some dvds. It keeps coming up with burn process failed at 4x(5,540kb/s) i dont understand much about computers and dont understand anything!!!
    heres the log


    1C80-0000-19E5-MA2X-4001-1646-****

    Windows XP 5.1
    IA32
    WinAspi: -

    NT-SPTI used
    Nero Version: 7.10.1.0
    Internal Version: 7, 10, 1, 0
    (Nero Express)
    Recorder: <PIONEER DVD-RW DVR-105> Version: 1.00 - HA 1 TA 0 - 7.10.1.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-RW DVR-105 >Version: 1.00 - HA 1 TA 0 - 7.10.1.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 0 ID 1 DMA: On
    DiskPeripheral : Maxtor 6Y120L0 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    PIONEER DVD-RW DVR-105 D: CdRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 140MB (144000kB)
    Memory in use : 70 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    13.7.2009
    ISO compilation
    20:21:02 #1 Text 0 File SCSIPTICommands.cpp, Line 424
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    20:21:03 #2 Text 0 File Isodoc.cpp, Line 6666
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    20:21:03 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
    First writeable address = 0 (0x00000000)

    20:21:03 #4 Text 0 File Burncd.cpp, Line 3508
    Turn on Disc-At-Once, using DVD media

    20:21:03 #5 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2176511 (483:40.11, 4250MB)

    20:21:03 #6 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)

    20:21:03 #7 Text 0 File DlgWaitCD.cpp, Line 2972
    Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
    Disc Manufacturer: RITEKF - 1
    Disc Application Code: 64, Disc Physical Code: 193

    20:21:03 #8 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    20:21:03 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2176512 (2176512) = #2176512/483:40.12
    relocatable, disc pos for caching/writing not required/ required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2176512 blocks [D: PIONEER DVD-RW DVR-105]
    --------------------------------------------------------------

    20:21:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
    Prepare [D: PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4457496576, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 1 | 0x41 | 2176512 | 0 | 0x00
    2176512 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    20:21:23 #11 Text 0 File SCSIPTICommands.cpp, Line 238
    Error on LockVolume: Access is denied.


    20:21:23 #12 Text 0 File SCSIPTICommands.cpp, Line 288
    SPTI - Error 5 on DismountVolue: Access is denied.


    20:21:33 #13 Text 0 File SCSIPTICommands.cpp, Line 238
    Error on LockVolume: Access is denied.


    20:21:33 #14 Text 0 File Burncd.cpp, Line 4294
    Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

    20:21:33 #15 Phase 24 File dlgbrnst.cpp, Line 1762
    Caching of files started

    20:21:33 #16 Text 0 File Burncd.cpp, Line 4413
    Cache writing successful.

    20:21:33 #17 Phase 25 File dlgbrnst.cpp, Line 1762
    Caching of files completed

    20:21:33 #18 Phase 36 File dlgbrnst.cpp, Line 1762
    Burn process started at 4x (5,540 KB/s)

    20:21:35 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:21:35 #20 Text 0 File DVDR.cpp, Line 3225
    Recording mode: Sequential Recording Mode

    20:21:35 #21 Text 0 File DVDR.cpp, Line 3381
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    20:21:35 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x06333900: Len x648

    20:21:35 #23 Text 0 File Cdrdrv.cpp, Line 9872
    ---- Disc Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Revision number of maximum recording speed: -
    Revision number of minimum recording speed: -
    Revision number table of recording speed: - - - - - - -
    Class: 0
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    20:21:35 #24 Text 0 File ThreadedTransfer.cpp, Line 269
    Pipe memory size 70192000

    20:21:37 #25 Text 0 File Cdrdrv.cpp, Line 1352
    20:21:37.625 - D: PIONEER DVD-RW DVR-105 : Queue again later

    20:22:31 #26 SPTI -1106 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 73 03
    Buffer x08340640: Len x10000
    0x4E 2D 9C 4A 81 C8 46 45 58 41 EE 88 59 05 CE 9A
    0x99 F2 97 C5 6B D3 A1 94 41 11 8A 02 C0 3B 2A 46
    0x20 C2 1B 0F 87 0E 8B AE B9 9F FB 75 A7 9F 9C E8

    20:22:31 #27 CDR -1106 File Writer.cpp, Line 303
    Power calibration error
    D: PIONEER DVD-RW DVR-105

    20:22:31 #28 Text 0 File DVDR.cpp, Line 3783
    EndDAO: Last written address was 767 (2FFh)

    20:22:31 #29 Phase 38 File dlgbrnst.cpp, Line 1762
    Burn process failed at 4x (5,540 KB/s)

    20:22:32 #30 Text 0 File SCSIPTICommands.cpp, Line 288
    SPTI - Error 5 on DismountVolue: Access is denied.


    20:22:36 #31 Text 0 File Cdrdrv.cpp, Line 11185
    DriveLocker: UnLockVolume completed

    20:22:36 #32 Text 0 File SCSIPTICommands.cpp, Line 424
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



    please help :(
     
  2. mistycat

    mistycat Registered Member

    Joined:
    Jan 18, 2004
    Posts:
    222
    Re: new and stuck :(

    Use ImgBurn (free) and burn to 1/2 the rated speed of the media. Use good quality media, Taiyo Yuden, Verbatim (made in Taiwan, don't know about India), any made in Japan, don't know about Ritek either. A Pioneer DVR-105 is pretty old but I have a DVR-106 I swear by.
     
  3. pandlouk

    pandlouk Registered Member

    Joined:
    Jul 15, 2007
    Posts:
    2,560
    Hi shell2909 and welcome at wilders. :)

    It seems that your drive does not recognize the media inserted.

    You must do a firmware upgrade.
    You can download the firmware here
    http://www.pioneer.eu/eur/content/support/support/software.html#fdvdwriter
    or use the following direct link
    http://www.pioneer.eu/eur/download.jsp?dir=/files/support/dvrup&filename=R5ta133.exe

    Important!!!
    Before updating your firmware:
    1. Reboot your pc
    2. After rebooting, close all the applications, and especially any security application (Antivirus,Firewall, antispyware, security suites, hips, etc. Make sure that their active scanners are disabled!)
    3. Make sure that there is no cd/dvd disk in your pioneer drive.
    4. Run the program for the firmware update and follow the instructions of the program.


    hope it helps,
    Panagiotis
     
  4. shell2909

    shell2909 Registered Member

    Joined:
    Jul 13, 2009
    Posts:
    2
    thank you :) ill try that tomorrow
    shell
     
  5. pandlouk

    pandlouk Registered Member

    Joined:
    Jul 15, 2007
    Posts:
    2,560
    You are welcome :)

    don't forget to tell us how it goes.

    Panagiotis
     
  6. renegade08

    renegade08 Registered Member

    Joined:
    Aug 26, 2008
    Posts:
    431
    I'll just suggest you to ditch Nero 7.
    This brings memories back.
    I have had this problem all the time with Nero 7, at the time when was released.
    I have seen at friends same thing. And i have heard from million of people about problems with Nero 7.

    Just change to other burning tool, preferable free.
     
  7. Uguel707

    Uguel707 Graphic Artist

    Joined:
    Nov 9, 2002
    Posts:
    2,999
    Location:
    San Diego
    I also had the same problem with Nero 7 and wasted many DVD's because of that. I switched for CD BurnerXP and also updated my drivers. It works fine now. :)
     
  8. voltron

    voltron Registered Member

    Joined:
    Jun 17, 2009
    Posts:
    23
    Location:
    philippines
    Hi;

    I also used Nero 7 and OH BHOY it wasted a lot of DVD's when I used it. Even the newer Nero 8 has problems. I find that 10% of successful burns were with errors mostly on dvd movie-copy I burned. I now use Imageburn and Roxio.

    Regards,

    voltron:cool:
     
  9. robtlmiller

    robtlmiller Registered Member

    Joined:
    Mar 26, 2009
    Posts:
    21
    Hello All!

    For the reasons in the previous comments about Nero 7 and 8, I have stayed with Nero 6.6 to present, running it on XP Pro, as it has NEVER given me a problem.

    Alas, XP Pro is getting "long in tooth" and . . .

    My concern is that when I run the Windows 7 compatibility check, Nero 6.6 shows as incompatible. Nonetheless, if and when I install Windows 7 [I skipped Vista, thank you] I am going to install Nero 6.6 "to see if it works".

    Any thoughts are appreciated.

    Thanks and Regards,
    Bob
     
    Last edited: Jul 19, 2009
  10. dbknox

    dbknox Registered Member

    Joined:
    Jun 7, 2006
    Posts:
    511
    Location:
    Canada
    I have used pretty much all versions of nero and have had no trouble at all. As a matter of fact I find that all my burned disks work with any windows operating system. Where as a lot of people seem to be having trouble exploring their CD/DVDs from other operating systems using the windows burning program. With Vista I have Nero 9, I do not think the earlier issues of Nero will work in vista without some serious tweaking.
    robtlmiller are you trying to attempt burning by using Nero "startsmart" or do you use Nero burning rom?
    I find I am more successful using Nero Burning rom instead of burning a disk in the "startsmart" format. See if that will work for you.
    I certainly hope it will.
     
Loading...
Thread Status:
Not open for further replies.