Hung at Checking Parameters - Should I Escape

Discussion in 'Paragon Partition Manager Product Line' started by bashasys, Feb 15, 2010.

Thread Status:
Not open for further replies.
  1. bashasys

    bashasys Registered Member

    Joined:
    Feb 15, 2010
    Posts:
    2
    Working with an OLD Dell Server with a 12 GB Primary, and a 140 GB Extended.
    Set it up to
    (1) Free up 20 GB at front of Extended
    (2) Shrink Extended by 20 GB
    (3) Expand Primary by 20 GB

    The system has been hung for close to 2 hours with No progress.

    The following messages have appeared
    =====================================
    Universal File System Driver Installation ....
    Getting Partitions Info.
    Flushing Systems Buffers
    Please Wait ...............................

    [Restart Enabled]
    Modifying Drive *: On Hard Disk 0
    Checking Parameters
    =============================

    Is is safe to ESCAPE or CONTROL-C. We need to get the server back on line, but don't want it trashed.
     
  2. bashasys

    bashasys Registered Member

    Joined:
    Feb 15, 2010
    Posts:
    2
    STILL HOSED
    After 4 hours and no progress.
    Hit ESC and CONTROL-C.
    No response. Then Cold-Booted.

    System now says
    Interrupted Operation: Insert the Recovery CD or other Recovery CD or other Recovery Media and Reboot PC.

    What do I do?
     
  3. SIW2

    SIW2 Registered Member

    Joined:
    Sep 6, 2009
    Posts:
    1,572
    Did you try booting the Paragon recovery cd ?
     
Thread Status:
Not open for further replies.