HD Manger 2011 Migrate OS to SSD Problem

Discussion in 'Paragon Partition Manager Product Line' started by Budda_357, Oct 15, 2011.

Thread Status:
Not open for further replies.
  1. Budda_357

    Budda_357 Registered Member

    Joined:
    Oct 15, 2011
    Posts:
    2
    Location:
    Down Under
    Hi, Guys
    Migrated to a Corsair Force 3 120 Gig (serial number 1134 which is not affected by the Corsairs 120 Gig stability issues) Went through the wizard the operation completed OK.
    Booted into the bios set the HDD boot priority to the corsair saved and rebooted on the boot screen went through the usual Gigabyte mobos screen messages (controller set to raid when first installed W7 on the HDD)
    screen displayed the loading OS message with the dot progress bar then after about 4 seconds the dot pattern progress bar changes to funny looking symbols and thats it. :ouch: :mad:
    Doesn't reboot have to power down manually.
    Any suggestions mobo used is the Z68xp-ud 4 with the latest F4 bios (F3 addressed OCZ Agilit SSD issues) does anybody know of any Corsair SSD issues with this mobo o_O
    Any suggestions please
    Thank you in advance
     
  2. Mech_An

    Mech_An Registered Member

    Joined:
    Mar 29, 2010
    Posts:
    855
    please try to disconnect source drive and change BIOS setting to non RAID mode (Normal IDE or Enhanced , not AHCI) and check if Windows boots.
     
Thread Status:
Not open for further replies.