error occurred on ESET SysRescue Blootable USB device

after creating Blootable USB device in ESET SysRescue when i boot from Usb Disk i seen error
"window failed to start . a resent hardware or software change might be the cause
file : \boot\bcd
status : 0xc000000e
info : an error occurred while attemping to read the boot configuration data"
i have Intel Board D865PERL which have support for booting for Removal Disk
Removal Disk is Kingston DataTraveler 2.0 USB Device(2 GB)
pls tell me what's the problem

 

Hello,

How much memory is installed into the Intel D865PERL motherboard?

Regards,

Aryeh Goretsky

 

Processor(s)
Number of processors 1
Number of cores 1 per processor
Number of threads 2 per processor
Name Intel Pentium 4
Code Name Northwood
Specification Intel(R) Pentium(R) 4 CPU 2.80GHz
Package Socket 478 mPGA
Family/Model/Stepping F.2.5
Extended Family/Model F.2
Brand ID 9
Core Stepping M0
Technology 0.13 um
Core Speed 2793.4 MHz
Multiplier x Bus speed 14.0 x 199.5 MHz
Rated Bus speed 798.1 MHz
Stock frequency 2800 MHz
Instruction sets MMX, SSE, SSE2
L1 Data cache (per processor) 8 KBytes, 4-way set associative, 64-byte line size
Trace cache (per processor) 12 Kuops, 8-way set associative
L2 cache (per processor) 512 KBytes, 8-way set associative, 64-byte line size
Chipset & Memory
Northbridge Intel i865P/PE/G/i848P rev. A2
Southbridge Intel 82801EB (ICH5) rev. 02
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP Side Band Addressing supported, enabled
Memory Type DDR
Memory Size 1024 MBytes
Memory Frequency 199.5 MHz (1:1)
CAS# Latency (tCL) 3.0 clocks
RAS# to CAS# (tRCD) 3 clocks
RAS# Precharge (tRP) 3 clocks
Cycle Time (tRAS) 8 clocks
Performance Mode disabled
System
System Manufacturer
System Name
System S/N
Mainboard Vendor Intel Corporation
Mainboard Model D865PERL
BIOS Vendor Intel Corp.
BIOS Version RL86510A.86A.0089.P21.0502132202
BIOS Date 02/13/2005
Memory SPD
Module 1 DDR, PC3200 (200 MHz), 512 MBytes, unknown brand
Module 2 DDR, PC3200 (200 MHz), 512 MBytes, unknown brand
Software
Windows Version Microsoft Windows Vista (6.0) Ultimate Edition Service Pack 1 (Build 6001)
DirectX Version 10.0

 

O googled your error and it seems that it is related to some BIOS version.
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1328549&SiteID=17

But check again properly if your USB stick is listed in BIOS's bootable devices and put it as first bootable device.

And also try this same USB key to boot in some other PC (another HW). Same result or not?

 

Hi:

Since every one is posting about Errors on the SysRescue feature on ESS v4 Beta, I thought I'd post some screenshot of it actually working and up to date... the image is here https://www.wilderssecurity.com/showpost.php?p=1357292&postcount=12 and it seems I cannot post it twice... so go check it out