Diagnostics of network problem

Discussion in 'Capsa Network Analyzer' started by Windmill, Dec 11, 2007.

Thread Status:
Not open for further replies.
  1. Windmill

    Windmill Registered Member

    Joined:
    Dec 4, 2007
    Posts:
    4
    Hello!
    I use Colasoft Capsa 6.4 for diagnosing the network.
    And now I get report in Capsa in window "Endpoints" - Packet Decode
    a too much packets in NBDGM protocol.
    I don't know what can be the problem
    This is the specs:

    Source port: UDP 138 (netbios-dgm) [34/2]
    Transaction Name: MAILSLOT\BROWSE [194/16]
    Protocol: 17 (UDP) [23/1]
    Source IP: 192.168.0.22 [26/4]
    Destination IP: 192.168.0.255 [30/4]

    ENDPOINTS DETAILS
    No. Relative Time Source Destination Protocol Size Decode Summary
    111 00:01:07.832797 192.168.0.169:netbios-dgm 192.168.0.255:netbios-dgm NBDGM 247 C: Transaction Name ="MAILSLOT\BROWSE"
     
  2. Colasoft Support

    Colasoft Support Colasoft Moderator

    Joined:
    Dec 6, 2007
    Posts:
    254
    Windmill, for only one specs, it is hard to confirm what is the problem. But it is extremely possible that you install Capsa in a incorrect place. I suggest you refer to <http://www.colasoft.com/support/installation/>, there are sorts of layouts. Hope it will be helpful.

    If the problem still exist, just provide more details.
     
  3. Windmill

    Windmill Registered Member

    Joined:
    Dec 4, 2007
    Posts:
    4
    thank you so much, support!

    you are actually right, I was installed it in an incorrect place. :p I change the place and install it again, everything goes well now.:D
     
    Last edited: Dec 12, 2007
  4. Colasoft Support

    Colasoft Support Colasoft Moderator

    Joined:
    Dec 6, 2007
    Posts:
    254
    I'm so glad to hear that.

    Windmill, if you have any further questions, please fell free make posts here. Or you can contact support@colasoft.com directly.
     
Thread Status:
Not open for further replies.