Bootable CD reset my computer

Discussion in 'Acronis True Image Product Line' started by digit, Apr 5, 2006.

Thread Status:
Not open for further replies.
  1. digit

    digit Registered Member

    Joined:
    Apr 5, 2006
    Posts:
    4
    I'm a registred user of TI 9.1 WS (build 3534). When I boot and choose full version I have a black screen with acronis logo in the upper left corner for a while. Then, logo disapear leaving only a white blinking cursor for 1-2 secs before rebooting the computer.

    First I have to say that safe version load without a hitch but lack of network support, therefore "safe" is useless to me.

    I have try "quiet acpi=off noapic" from the "PLEASE READ BEFORE YOU POST" FAQ with same result. Then I have removed the "quiet" word, linux load just fine leaving me at the shell.

    I'm booting from a USB flash, I will try to mount that flash disk as RW to save sysinfo output and post the output here.

    *** EDIT ***

    Computer is Via EPIA-PD
     
  2. eabasolo

    eabasolo Registered Member

    Joined:
    Apr 5, 2006
    Posts:
    1
    Few days ago I had a similar situation while ATIS was cheching connected hard disks. That happened from boot cd and Windows ATIS GUI. I just checked hard disk volumes for errors with Windows Explorer | Tools | Fix Errors and problem gone.

    Good luck
     
  3. digit

    digit Registered Member

    Joined:
    Apr 5, 2006
    Posts:
    4
    Thank you eabasolo but I've try with a different HD with the same result. To make sure it is not related to error on disk, I have formated the second disk with FAT32. Still no luck.

    I think it is related to VIA Samuel 2 CPU or framebuffer
     
  4. digit

    digit Registered Member

    Joined:
    Apr 5, 2006
    Posts:
    4
    LONG POST: sysinfo.txt

    $ cat /proc/version
    Linux version 2.4.32-acronis#1 SMP Mon Mar 6 18:32:22 MSK 2006

    $ cat /proc/cmdline
    MBRCRCS=F850A6EE ramdisk_size=27668

    $ cat /proc/interrupts
    CPU0
    0: 54677 XT-PIC timer
    1: 780 XT-PIC keyboard
    2: 0 XT-PIC cascade
    3: 0 XT-PIC usb-uhci
    5: 0 XT-PIC usb-uhci
    9: 0 XT-PIC acpi
    10: 0 XT-PIC ehci_hcd
    11: 0 XT-PIC usb-uhci
    12: 19 XT-PIC PS/2 Mouse
    15: 20 XT-PIC ide1
    NMI: 0
    LOC: 0
    ERR: 0
    MIS: 0

    $ cat /proc/modules
    md_mod 67852 0 (unused)
    snapapi 21936 0 (unused)
    jfs 142032 0 (unused)
    xfs 443356 0 (unused)
    reiserfs 170256 0 (unused)
    ext3 57164 0 (unused)
    jbd 38116 0 [ext3]
    ext2 32768 0 (unused)
    nls_cp850 3400 0 (unused)
    smbfs 39160 0 (unused)
    af_packet 9036 0 (unused)
    mousedev 3724 1
    input 3008 0 [mousedev]
    ide-scsi 8992 0
    via-rhine 11832 0 (unused)
    mii 1996 0 [via-rhine]
    usb-uhci 21580 0 (unused)
    ehci-hcd 17060 0 (unused)
    usbcore 57420 1 [usb-uhci ehci-hcd]
    ide-disk 13608 1
    pcmcia_core 40868 0
    ide-detect 144 0 (unused)
    via82cxxx 9508 1
    ide-core 96084 1 [md_mod ide-scsi ide-disk ide-detect via82cxxx]
    pci_hotplug 14924 0
    nls_utf8 544 2
    udf 82240 0 (unused)
    isofs 17716 0 (unused)
    vfat 9560 1
    fat 30168 0 [vfat]
    sg 26112 0 (unused)
    st 27336 0 (unused)
    sr_mod 13372 0 (unused)
    cdrom 26240 0 [sr_mod]
    sd_mod 10268 0 (unused)
    scsi_mod 55000 5 [ide-scsi sg st sr_mod sd_mod]

    $ cat /proc/pci
    PCI devices found:
    Bus 0, device 0, function 0:
    Class 0600: PCI device 1106:3123 (rev 0).
    Master Capable. Latency=8.
    Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
    Bus 0, device 1, function 0:
    Class 0604: PCI device 1106:b091 (rev 0).
    Master Capable. No bursts. Min Gnt=12.
    Bus 0, device 15, function 0:
    Class 0200: PCI device 1106:3106 (rev 139).
    IRQ 10.
    Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
    I/O at 0xd000 [0xd0ff].
    Non-prefetchable 32 bit memory at 0xde000000 [0xde0000ff].
    Bus 0, device 16, function 0:
    Class 0c03: PCI device 1106:3038 (rev 12:cool:.
    IRQ 11.
    Master Capable. Latency=32.
    I/O at 0xd400 [0xd41f].
    Bus 0, device 16, function 1:
    Class 0c03: PCI device 1106:3038 (rev 12:cool:.
    IRQ 3.
    Master Capable. Latency=32.
    I/O at 0xd800 [0xd81f].
    Bus 0, device 16, function 2:
    Class 0c03: PCI device 1106:3038 (rev 12:cool:.
    IRQ 5.
    Master Capable. Latency=32.
    I/O at 0xdc00 [0xdc1f].
    Bus 0, device 16, function 3:
    Class 0c03: PCI device 1106:3104 (rev 130).
    IRQ 10.
    Master Capable. Latency=32.
    Non-prefetchable 32 bit memory at 0xde001000 [0xde0010ff].
    Bus 0, device 17, function 0:
    Class 0601: PCI device 1106:3177 (rev 0).
    Bus 0, device 17, function 1:
    Class 0101: PCI device 1106:0571 (rev 6).
    IRQ 11.
    Master Capable. Latency=32.
    I/O at 0xe000 [0xe00f].
    Bus 0, device 17, function 5:
    Class 0401: PCI device 1106:3059 (rev 80).
    IRQ 5.
    I/O at 0xe400 [0xe4ff].
    Bus 0, device 18, function 0:
    Class 0200: PCI device 1106:3065 (rev 116).
    IRQ 11.
    Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
    I/O at 0xe800 [0xe8ff].
    Non-prefetchable 32 bit memory at 0xde002000 [0xde0020ff].
    Bus 1, device 0, function 0:
    Class 0300: PCI device 1106:3122 (rev 3).
    IRQ 11.
    Master Capable. Latency=32. Min Gnt=2.
    Prefetchable 32 bit memory at 0xd8000000 [0xdbffffff].
    Non-prefetchable 32 bit memory at 0xdc000000 [0xdcffffff].

    $ cat /proc/bus/pci/devices
    0000 11063123 0 d0000008 00000000 00000000 00000000 00000000 00000000 00000000 08000000 00000000 00000000 00000000 00000000 00000000 00000000
    0008 1106b091 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 PCI Bridge
    0078 11063106 a 0000d001 de000000 00000000 00000000 00000000 00000000 00000000 00000100 00000100 00000000 00000000 00000000 00000000 00000000 via-rhine
    0080 11063038 b 00000000 00000000 00000000 00000000 0000d401 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    0081 11063038 3 00000000 00000000 00000000 00000000 0000d801 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    0082 11063038 5 00000000 00000000 00000000 00000000 0000dc01 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 usb-uhci
    0083 11063104 a de001000 00000000 00000000 00000000 00000000 00000000 00000000 00000100 00000000 00000000 00000000 00000000 00000000 00000000 ehci_hcd
    0088 11063177 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    0089 11060571 b 00000000 00000000 00000000 00000000 0000e001 00000000 00000000 00000000 00000000 00000000 00000000 00000010 00000000 00000000 VIA IDE
    008d 11063059 5 0000e401 00000000 00000000 00000000 00000000 00000000 00000000 00000100 00000000 00000000 00000000 00000000 00000000 00000000
    0090 11063065 b 0000e801 de002000 00000000 00000000 00000000 00000000 00000000 00000100 00000100 00000000 00000000 00000000 00000000 00000000 via-rhine
    0100 11063122 b d8000008 dc000000 00000000 00000000 00000000 00000000 00000000 04000000 01000000 00000000 00000000 00000000 00000000 00010000

    $ cat /proc/bus/usb/devices
    T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=dc00
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=d800
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=d400
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
    B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 2.04
    S: Manufacturer=Linux 2.4.32-acronis ehci_hcd
    S: Product=PCI device 1106:3104
    S: SerialNumber=00:10.3
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

    $ cat /proc/bus/ieee1394/devices
    file not found

    $ cat /proc/partitions
    major minor #blocks name

    22 0 2062368 ide/host0/bus1/target0/lun0/disc
    22 1 2060320 ide/host0/bus1/target0/lun0/part1

    $ cat /proc/scsi/scsi
    Attached devices:
    Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: HL-DT-ST Model: CD-ROM GCR-8520B Rev: 1.00
    Type: CD-ROM ANSI SCSI revision: 02
    $ dmesg
    <4>Linux version 2.4.32-acronis#1 SMP Mon Mar 6 18:32:22 MSK 2006
    <6>BIOS-provided physical RAM map:
    <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    <4> BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
    <4> BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS)
    <4> BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data)
    <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    <5>479MB LOWMEM available.
    <4>On node 0 totalpages: 122864
    <4>zone(0): 4096 pages.
    <4>zone(1): 118768 pages.
    <4>zone(2): 0 pages.
    <6>DMI 2.2 present.
    <6>26 structures occupying 717 bytes.
    <6>DMI table at 0x000F0800.
    <4>BIOS Vendor: Award Software International, Inc.
    <4>BIOS Version: 6.00 PG
    <4>BIOS Release: 03/11/2004
    <4>System Vendor: VIA Technologies, Inc.
    <4>Product Name: VT8623-8235
    <4>Version:
    <4>Serial Number:
    <4>Board Vendor:
    <4>Board Name: EPIA-PD
    <4>Board Version:
    <6>ACPI: RSDP (v000 VT9174 ) @ 0x000f6480
    <6>ACPI: RSDT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3000
    <6>ACPI: FADT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3040
    <6>ACPI: DSDT (v001 VT9174 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
    <4>Kernel command line: MBRCRCS=F850A6EE ramdisk_size=27668
    <4>No local APIC present or hardware disabled
    <6>Initializing CPU#0
    <4>Detected 601.369 MHz processor.
    <4>Console: colour dummy device 80x25
    <4>Calibrating delay loop... 1199.30 BogoMIPS
    <6>Memory: 470276k/491456k available (1091k kernel code, 20792k reserved, 231k data, 120k init, 0k highmem)
    <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
    <6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
    <6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
    <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
    <6>Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
    <4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
    <6>CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
    <6>CPU: L2 Cache: 64K (32 bytes/line)
    <7>CPU: After generic, caps: 00803135 80803035 00000000 00000000
    <7>CPU: Common caps: 00803135 80803035 00000000 00000000
    <6>Checking 'hlt' instruction... OK.
    <4>ACPI: IRQ9 SCI: Level Trigger.
    <4>POSIX conformance testing by UNIFIX
    <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
    <4>mtrr: detected mtrr type: Intel
    <6>CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
    <6>CPU: L2 Cache: 64K (32 bytes/line)
    <7>CPU: After generic, caps: 00803135 80803135 00000000 00000000
    <7>CPU: Common caps: 00803135 80803035 00000000 00000000
    <4>CPU0: Centaur VIA Samuel 2 stepping 03
    <4>per-CPU timeslice cutoff: 182.88 usecs.
    <5>SMP motherboard not detected.
    <5>Local APIC not detected. Using dummy APIC emulation.
    <4>Waiting on wait_init_idle (map = 0x0)
    <4>All processors have done init_idle
    <6>ACPI: Subsystem revision 20040326
    <6>PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=1
    <6>PCI: Using configuration type 1
    <6>ACPI: Interpreter enabled
    <6>ACPI: Using PIC for interrupt routing
    <6>ACPI: System [ACPI] (supports S0 S1 S4 S5)
    <6>ACPI: PCI Root Bridge [PCI0] (00:00)
    <4>PCI: Probing PCI hardware (bus 00)
    <6>PCI: Via IRQ fixup
    <6>PCI: Via IRQ fixup
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
    <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
    <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
    <6>PCI: Probing PCI hardware
    <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
    <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
    <6>PCI: Using ACPI for IRQ routing
    <6>isapnp: Scanning for PnP cards...
    <6>isapnp: No Plug & Play device found
    <6>Linux NET4.0 for Linux 2.4
    <6>Based upon Swansea University Computer Society NET3.039
    <4>Initializing RT netlink socket
    <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
    <5>apm: overridden by ACPI.
    <4>Starting kswapd
    <6>devfs: v1.12c (2002081:cool: Richard Gooch (rgooch@atnf.csiro.au)
    <6>devfs: boot_options: 0x0
    <6>ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
    <3>Loading, please wait...
    <6>vesafb: framebuffer at 0xd8000000, mapped to 0xde807000, size 1875k
    <6>vesafb: mode is 800x600x16, linelength=1600, pages=31
    <6>vesafb: protected mode interface info at c000:7dec
    <6>vesafb: scrolling: redraw
    <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
    <6>Looking for splash picture... no good signature found.
    <4>Console: switching to colour frame buffer device 100x37
    <6>fb0: VESA VGA frame buffer device
    <6>Serial driver version 5.05c (2001-07-0:cool: with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
    <4>RAMDISK driver initialized: 16 RAM disks of 27668K size 1024 blocksize
    <6>NET4: Linux TCP/IP 1.0 for NET4.0
    <6>IP Protocols: ICMP, UDP, TCP, IGMP
    <6>IP: routing cache hash table of 4096 buckets, 32Kbytes
    <6>TCP: Hash tables configured (established 32768 bind 3276:cool:
    <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    <5>RAMDISK: Compressed image found at block 0
    <6>Freeing initrd memory: 13281k freed
    <4>VFS: Mounted root (romfs filesystem) readonly.
    <6>Freeing unused kernel memory: 120k freed
    <4>$ /bin/mount -t proc proc /proc
    <4>$ /bin/mount -t devfs devfs /devfs
    <4>$ /bin/insmod floppy
    <4>Using /lib/modules/floppy.o
    <6>inserting floppy driver for 2.4.32-acronis
    <6>Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
    <4>floppy0: no floppy controllers found
    <4>init_module: floppy
    <4>: Unknown error 19
    <4>$ /bin/insmod scsi_mod
    <4>Using /lib/modules/scsi_mod.o
    <6>SCSI subsystem driver Revision: 1.00
    <4>$ /bin/insmod sd_mod
    <4>Using /lib/modules/sd_mod.o
    <4>$ /bin/insmod cdrom
    <4>Using /lib/modules/cdrom.o
    <4>$ /bin/insmod sr_mod
    <4>Using /lib/modules/sr_mod.o
    <4>$ /bin/insmod st
    <4>Using /lib/modules/st.o
    <4>$ /bin/insmod sg
    <4>Using /lib/modules/sg.o
    <4>$ /bin/insmod fat
    <4>Using /lib/modules/fat.o
    <4>$ /bin/insmod vfat
    <4>Using /lib/modules/vfat.o
    <4>$ /bin/insmod ntfs
    <4>ntfs.o: no module by that name found
    <4>$ /bin/insmod isofs
    <4>Using /lib/modules/isofs.o
    <4>$ /bin/insmod udf
    <4>Using /lib/modules/udf.o
    <5>udf: registering filesystem
    <4>$ /bin/insmod nls_utf8
    <4>Using /lib/modules/nls_utf8.o
    <4>$ /bin/insmod pci_hotplug
    <4>Using /lib/modules/pci_hotplug.o
    <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    <4>$ /bin/insmod acpiphp
    <4>Using /lib/modules/acpiphp.o
    <6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
    <4>init_module: acpiphp
    <4>: Unknown error 19
    <4>$ /bin/insmod ide-core
    <4>Using /lib/modules/ide-core.o
    <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
    <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    <4>$ /bin/insmod via82cxxx
    <4>Using /lib/modules/via82cxxx.o
    <6>VP_IDE: IDE controller at PCI slot 00:11.1
    <6>VP_IDE: chipset revision 6
    <6>VP_IDE: not 100% native mode: will probe irqs later
    <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    <6>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    <6> ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
    <6> ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
    <4>$ /bin/insmod ide-detect
    <4>Using /lib/modules/ide-detect.o
    <4>hdc: QUANTUM FIREBALL ST2.1A, ATA DISK drive
    <4>hdd: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive
    <4>blk: queue dea51f6c, I/O limit 4095Mb (mask 0xffffffff)
    <4>ide1 at 0x170-0x177,0x376 on irq 15
    <4>$ /bin/insmod pcmcia_core
    <4>Using /lib/modules/pcmcia_core.o
    <6>Linux Kernel Card Services 3.1.22
    <6> options: [pci] [cardbus] [pm]
    <4>$ /bin/insmod i82365
    <4>Using /lib/modules/i82365.o
    <6>Intel ISA PCIC probe: not found.
    <4>init_module: i82365
    <4>: Unknown error 19
    <4>$ /bin/insmod ide-disk
    <4>Using /lib/modules/ide-disk.o
    <4>hdc: attached ide-disk driver.
    <6>hdc: 4124736 sectors (2112 MB) w/81KiB Cache, CHS=4092/16/63, UDMA(33)
    <6>Partition check:
    <6> /dev/ide/host0/bus1/target0/lun0: [PTBL] [1023/64/63] p1
    <4>$ /bin/insmod usbcore
    <4>Using /lib/modules/usbcore.o
    <6>usb.c: registered new driver usbdevfs
    <6>usb.c: registered new driver hub
    <4>$ /bin/insmod usb-ohci
    <4>Using /lib/modules/usb-ohci.o
    <4>init_module: usb-ohci
    <4>: Unknown error 19
    <4>$ /bin/insmod ehci-hcd
    <4>Using /lib/modules/ehci-hcd.o
    <6>ehci_hcd 00:10.3: PCI device 1106:3104
    <6>ehci_hcd 00:10.3: irq 10, pci mem dea86000
    <6>usb.c: new USB bus registered, assigned bus number 1
    <6>ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    <6>hub.c: USB hub found
    <6>hub.c: 6 ports detected
    <4>$ /bin/insmod usb-uhci
    <4>Using /lib/modules/usb-uhci.o
    <6>usb-uhci.c: $Revision: 1.275 $ time 14:45:17 Mar 13 2006
    <6>usb-uhci.c: High bandwidth mode enabled
    <6>usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 2
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <6>usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 3
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 3
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <6>usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 5
    <4>usb-uhci.c: Detected 2 ports
    <6>usb.c: new USB bus registered, assigned bus number 4
    <6>hub.c: USB hub found
    <6>hub.c: 2 ports detected
    <6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    <4>$ /bin/insmod mii
    <4>Using /lib/modules/mii.o
    <4>$ /bin/insmod via-rhine
    <4>Using /lib/modules/via-rhine.o
    <6>via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
    <6> http://www.scyld.com/network/via-rhine.html
    <6>eth0: VIA VT6105 Rhine-III at 0xd000, 00:40:63:da:d2:34, IRQ 10.
    <6>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
    <6>eth1: VIA VT6102 Rhine-II at 0xe800, 00:40:63:da:d1:d0, IRQ 11.
    <6>eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
    <4>Waiting for USB/IEEE1394 devices arrival...
    <4>$ /bin/mount -t usbdevfs usbdevfs /proc/bus/usb
    <4>$ /bin/insmod ide-scsi
    <4>Using /lib/modules/ide-scsi.o
    <4>hdd: attached ide-scsi driver.
    <6>hdd: DMA disabled
    <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
    <4> Vendor: HL-DT-ST Model: CD-ROM GCR-8520B Rev: 1.00
    <4> Type: CD-ROM ANSI SCSI revision: 02
    <4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
    <4>sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
    <6>Uniform CD-ROM driver Revision: 3.12
    <4>Checking for graphic mode...
    <4>$ /bin/insmod input
    <4>Using /lib/modules/input.o
    <4>$ /bin/insmod mousedev
    <4>Using /lib/modules/mousedev.o
    <6>mice: PS/2 mouse device common for all mice
    <4>Detecting mouse...
    <4>$ /bin/gpm -R -m /devfs/input/mice -t imps2 -M -m /devfs/misc/psaux -t imps2
    <4>Checking for network adapter...
    <4>$ /bin/insmod af_packet
    <4>Using /lib/modules/af_packet.o
    <4>$ /bin/insmod smbfs
    <4>Using /lib/modules/smbfs.o
    <4>$ /bin/ifconfig lo 127.0.0.1
    <4>$ /bin/ifconfig lo up
    <4>$ /bin/insmod nls_cp850
    <4>Using /lib/modules/nls_cp850.o
    <4>$ /bin/insmod ext2
    <4>Using /lib/modules/ext2.o
    <4>$ /bin/insmod jbd
    <4>Using /lib/modules/jbd.o
    <6>Journalled Block Device driver loaded
    <4>$ /bin/insmod ext3
    <4>Using /lib/modules/ext3.o
    <4>$ /bin/insmod reiserfs
    <4>Using /lib/modules/reiserfs.o
    <4>$ /bin/insmod xfs
    <4>Using /lib/modules/xfs.o
    <6>SGI XFS with no debug enabled
    <4>$ /bin/insmod jfs
    <4>Using /lib/modules/jfs.o
    <4>$ /bin/insmod sunrpc
    <4>sunrpc.o: no module by that name found
    <4>$ /bin/insmod snapapi
    <4>Using /lib/modules/snapapi.o
    <6>snapapi_init: Snapapi(v.0.7.0) init OK. Session size 6700.
    <4>$ /bin/insmod md_mod
    <4>Using /lib/modules/md_mod.o
    <6>md: md driver 0.90.0, Adaptec md 0.1.0, MAX_MD_DEVS=256, MD_SB_DISKS=27
    <6>md: Autodetecting RAID arrays.
    <6>md: autorun ...
    <6>md: ... autorun DONE.
    <4>$ /bin/rm -rf /etc/codepage /etc/pcmcia
    <4>$ /bin/sh

    $ lspci
    01:00.0 1106:3122 1106:3122 03:00:00
    00:12.0 1106:3065 1106:0102 02:00:00 via-rhine
    00:11.5 1106:3059 1106:aa01 04:01:00
    00:11.1 1106:0571 1106:aa01 01:01:8a via82cxxx [VIA IDE]
    00:11.0 1106:3177 1106:aa01 06:01:00
    00:10.3 1106:3104 1106:3104 0c:03:20 ehci-hcd [ehci_hcd]
    00:10.2 1106:3038 1106:aa01 0c:03:00 usb-uhci
    00:10.1 1106:3038 1106:aa01 0c:03:00 usb-uhci
    00:10.0 1106:3038 1106:aa01 0c:03:00 usb-uhci
    00:0f.0 1106:3106 1106:0106 02:00:00 via-rhine
    00:01.0 1106:b091 0000:0000 06:04:00 [PCI Bridge]
    00:00.0 1106:3123 1106:aa01 06:00:00
    Modules: ide-detect ide-disk pcmcia_core ide-scsi sd_mod sg sr_mod st mousedev af_packet ext2 ext3 isofs jfs md_mod nls_cp850 nls_utf8 pci_hotplug reiserfs smbfs snapapi udf vfat xfs
     
  5. Acronis Support

    Acronis Support Acronis Support Staff

    Joined:
    Apr 28, 2004
    Posts:
    25,885
    Hello digit,

    Thank you for choosing Acronis Workstation Disk Backup Software.

    Please boot your computer from the Acronis True Image rescue disc and press F11 key when the selection screen advising you to select either "Full", "Safe" or "Boot into Windows" option appears. After you get the "Linux Kernel Settings" prompt, please remove the "quiet" word, click on the "OK" button, choose "Full Version" and wait for # prompt to appear. Please add product and press Enter.

    If that does not help, please create Acronis Report and Windows System Information as it is described in Acronis Help Post.

    Please submit a request for technical support. Attach all the collected files and information to your request along with the step-by-step description of the actions taken before the problem appears and the link to this thread. We will investigate the problem and try to provide you with the solution.

    Thank you.
    --
    Tatyana Tsyngaeva
     
  6. digit

    digit Registered Member

    Joined:
    Apr 5, 2006
    Posts:
    4
    product does not have any effect.

    / #
    / # product
    / #
    / # ls -al /bin/product
    -rwxr-xr-x 1 0 0 14348584 /bin/product
     
Thread Status:
Not open for further replies.