That is not true. I successfully used TI9 to clone a PATA Seagate drive to a SATA Maxtor drive without any problems. The SATA drive is brand new...
Most enclosures for 2.5” hard drives do not need external power supplies because they can operate on USB bus power. I have three 2.5” USB2.0...
Certainly MemTest86+ is not only the memory test tool anyone should rely on. It is a very useful tool for initial memory testing before booting to...
Try this: 1) Turn the PC off (power down) 2) Turn on the external firewire HD that has already been connected to the PC. 3) Turn on the PC to...
Similar KB908531 problem http://www.wilderssecurity.com/showthread.php?t=128043
I used to have an intermittent problem with one of my non-raid SATA drives. When the problem occurred the drive was inaccessible. If the problem...
I have been using Roxio 7 with DragToDisk and TI8/TI9. There is no conflict. When you're creating a recovery disk, try to insert a CD just after...
If you need to see how stable a stock/overclocked PC is (after it passes memtest86+), run prime95 (http://www.mersenne.org/freesoft.htm) to stress...
I have successfully done cloning using TI8 and TI9 without preparing brand new destination drives (i.e. they have never been used and there are no...
Check the boot sequence in BIOS. Make sure the IDE device is boot after the RAID device.
I am not sure why you need to use Maxtor MaxBlast utility to set the cloned SATA drive as a boot drive after it was cloned since the boot sector...
Separate names with a comma.