Problem after update

5/10 Windows Updates install reboot. <prior no driver issues>

Windows security > device security > core isolation > memory integrity

did not find noncompatible drivers
SFC /scannow no problems
device mgr. update TPM 2.0 <installed>
dism restore health

Windows registry line ends, scenarios missing

BIOS Dell used dell driver dll
______________





Thanks!!

 

It's not clear from your post what the problem is. If you can provide a description of the problem, then hopefully some will be able to help you.

 

Sorry! Window tray icon "windows security" flagged device security, which led to: core isolation > memory integrity

Memory integrity could not be forced to turn on using reg edit, nor with other troubleshooting methods. The reg entry for memory integrity. Is missing a segment, as compared to the above post #1

"Windows security > device security > core isolation > memory integrity memory cannot be turned on"

 

Seems Windows refresh or Macrium would fix, DISM RESTORE Iimage failed. If reg line modified to add SC...Integrity. Memory integrity man be forced on, or fail

Also device manager showed the driver ticked problem, elevated cmd, del, protected file, replaced same problem

 

My wife's laptop Win 11, after overnight Windows update rebooted to:

Windows security center, Memory Integrity error "OFF"

Can't be turned on at reg edit path truncated, value cannot be changed from 0 to 1 as the path is missing a segment:

same issue as post #1



see post #1 red line highlighted, is missing

 

@Rico
Since you don't say anything about your system, then ....
it is important to note that your processor (CPU) must support virtualization and it must be enabled in your BIOS or UEFI firmware.
Does your CPU support and is it enabled in BIOS and/or UEFI firmware?
It is not always possible to enable or disable everything from the registry, and the newer your computer is, the fewer these options are in the registry.

 

@kaljukass It does, as the tray icon did not show a Warning mark. Dismiss the error removes the check mark, but reboot re-enables
Windows tray icon.
another
Note: I tried after the error to toggle on off mem integ. Windows cannot re-install.


Followed by another pc showing the same, error mrk after updating!

 

It's I-7 8th gen. It's rather odd that previously, not an issue years (No notifications 'mem integ), then after reboot win update, windows security loads "displaying icon indicating the problem. Mem integ.

1. possible malware, but two machines
2. Update tried to turn "mem integ" on & couldn't. generating error

the other is 1-7 >8, the same problem after update.

SFC /scannow <sees nothing wrong>
Dism restore see no issue

perhaps the bios was changed by the update, requiring BIOS EDIT

the other machine, also had bios upgrade prior to mem problem, dell firmware

Navigating to bios i'm looking for enabled/disabled "WHAT IT CALLED" if there.

THANK YOU

 

I've got similar problem on HP but for me there seems to be a problem with incompatible drivers. I don't know if this started to occur after update since I don't have SecurityHealtSystem in my systray.

Here is my list of incompatible drivers:



Will try to find updates for them.

@Rico - I would check your BIOS/UEFI settings for virtualisation and enable it if it was disabled.

 

@Rico

It is still not possible to recommend anything to you, please be so kind and at least tell me the exact data of your computer, how and which Windows is installed. This means whether there is a normal installation or whether some kind of virtualization is used, etc.
As long as we know absolutely nothing about your computer, it is impossible to recommend anything.

 

All I did is look took pics, in American Megatrends.
reboot resulted in pic.

Any Idea how this corrected < educational>

Hope all goes smoothly other, machines.

Thanks Guys
Rico