If you ever put in a "real time" firewall log as good as "Tiny Firewall", then I will try out your "TinyWall"!
Hi All, I'm a new user of Tinywall and I'm impressed. Congratulations to the developer Windows 7 Firewall is meant to be a pretty good firewall, so I thought, why not use it and install a good front-end app like Tinywall to improve it further. I've also tested WFN, which is another good value-add to W7 Firewall. There's limited information online on how to use Tinywall, or recommended practises. I'd like to know what everyone's thoughts are on how to best use Tinywall. It does require some manual work to add applications to the exceptions list. This question is also relevant to other firewall users, who may get pop-ups and just click "accept" to allow and then the firewall creates a rule by providing unrestricted oubound and inbound access. When adding an exception to Tinywall (or possibly any other firewall), do you often just stick with the default rule which is allow "Unrestricted UDP and TCP traffic"? Or do you occassionally chose to set-up different rule, such as "No Restrictions" (which allows access using any protocol), or maybe even "Allow outgoing UDP and TCP traffic" only? I'm guessing this will all depend on what application/file needs access, but how would you know for the majority of applications (especially various AV files needing access). Having tested Windows Firewall Notifier previously, it goes about creating outbound rules only by providing pop-ups for apps/files that need outbound access. It leaves any inbound rules to Windows 7 Firewall to set-up by providing the Windows 7 firewall pop-up. Therefore there's not many inbound rules set-up in your Windows firewall. However after using Tinywall and usually just adding application exceptions by chosing the default to allow "Unrestricted UDP and TCP traffic", I have noticed I have lots of inbound rules set-up in the Windows 7 Firewall. Its beginning to look like a big dog's breakfast. I never used to have so many inbound rules set-up when using WFN. Is it better to just provide outbound access to most apps? When adding an exception in Tinywall and if you were to chose "Outbound UDP and TCP traffic", does it create an inbound rule as well to block inbound traffic for the specific app? Or does it create an outbound rule only, which would mean if inbound access was ever required for the specific app, then Windows 7 Firewall should provide you with its own pop-up requesting inbound access? How does everyone else go about deciding on how to best set-up their rules? Thoughts?
I have Portable Firefox installed in a secure container, and every time I restart my computer it gets blocked and I have to re-add the executable to the whitelist. I've had this issue with every other firewall I've tried, whereby they decide Portable apps inside my container are new applications after each computer restart, despite mounting them on the same drive letter each time. I don't suppose there is any way around this? My only other workaround in other firewalls is to accept trusted applications so it doesn't ask me about them.
I put Tinywall on learning mode while starting OpenVpn application and login. It did not work by "whitelist window".
i think this is what i've been looking for all along! i'm gonna test this for a few more days but so far so good. if i decide to keep it i will certainly donate a few $ to help for the development of TinyWall.
Firefox: built-in rule = works Skype portable: "Whitelist by window" = works uTorrent portable: "Whitelist by window" = works Gibson's Shields Up = All green awesomeness!
All green at shields up is meaningless.stealthing does not add anymore security to you. I dont trust these tests at all. It seems to have automated messages about your firewall etc. i have tried tinywall and i liked it very much but as long as ports are closed then you are secure.All this stealth nonsense is just marketing lingo. Regards.
Remember people Shields Up checks your router first. So if your behind a router with NAT it is NOT testing your software firewall. Anyone using this figure out how to add "avast.setup" to the out going rules when the exe is not even in the program folder?
tnx for the heads-up Aventador. i don't have a router. hopefully someone can help you with your Avast issues. still, might be worth it to hit the Avast support or forums for some help. i've seen your reply in the other thread. i still think it's worth a try m8. other people surely have come across this problem?!
one issue: on my Windows 7 machine i lose my network connection after a reboot or resuming from Sleep. i disabled TinyWall from auto-starting at boot but i'd like a better solution if anyone has one.
the situation is not reproducible 100% sometimes i reboot and it works fine. it seems to unblock automatically if i launch Firefox. strange...
hmm seems to be a bit erratic in its behaviour.I actually tried tinywall and it seemed ok.Im not an expert on configuring these things.
This was a problem previously. Looks like it's back. https://www.wilderssecurity.com/showpost.php?p=2020183&postcount=303
Hi, I have TinyWall installed and I'm having issues trying to use wireless printing (Canon MG5200) which worked without issue when I had a different firewall installed (AVG, subscription now expired). I've tried using the Auto Learn feature first > printing > returning to normal mode, which has not helped and I've also tried disabling the firewall completely, again, without success. The issue appears to be the way TinyWall adjusts the settings of the Windows firewall (Win 7). I've disabled both firewalls (Windows & Tiny) and the printer does start working again after a minute or so. I've also manually Enabled the Windows Firewall File & Printer sharing settings to allow all traffic but as soon as I re-enable TinyWall, those settings are reset and become Disabled once again, thus blocking the printer communication. How can I remedy this please? Any help greatly appreciated. Thank you.
For the Avast issue your having with TinyWall, i had the same thing Il try to explain. First keep tinywall's ''manage'' tab open, now open avast and order it to download newest AV signatures, then quickly press detect in tinywall's manage tab, it found the avast.setup for the duration when your trying to update avast AV signatures. Took me 2 times to get it right Btw, you can only make detailed changes to avast.setup rule in tinywall when avast is updating, if your trying to make changes to it when your not updating it, it wont work atleast it didnt when i tried it. Had to start the avast update again and then changed from ''unrestricted UDP and TCP Traffic'' to ''allow outgoing UDP and TCP Traffic''. Add's more protection Hope this help sry for the grammar errors
It worked. Took a bit. I had to select Manage/Additional Exceptions/Add Application/Select a process. I kept that open while manually updating Avast and "avast.setup" appeared so I selected it and presto. Thanks a million.
tnx Yanick! i would never have found this myself. the documentation is lacking. i'm enjoying this little TinyWall so far. i'll donate a few $ to the developer when i'm out of the red.
