Thanks for all data lose…

Discussion in 'Paragon Partition Manager Product Line' started by Joe090, Jun 18, 2012.

Thread Status:
Not open for further replies.
  1. Joe090

    Joe090 Registered Member

    Joined:
    Jun 18, 2012
    Posts:
    5
    Location:
    USA
    Before I use Paragon Hard Disk Manager 11 Server
    All below hard disk have data.

    C:\ OCZ SSD 120 GB (Boot hard disk)
    D:\ RAID0 Marvell 500 GB (D+E)
    E:\ RAID0 Marvell 500 GB (D+E)
    F:\ Split in two 500 GB - Western Digital 1 TB (F+G)
    G:\ Split in two 500 GB - Western Digital 1 TB (F+G)

    After I use Paragon Hard Disk Manager 11 Server

    C:\ OCZ SSD 120 GB (Boot hard disk)
    D:\ RAID0 Marvell 500 GB (D+E)
    E:\ RAID0 Marvell 500 GB (D+E)

    So I lose all data on F:\ and G:\ now.
    Your program writes:
    Basic GPT Hard Disk 1 (WDC WD1002FAEX-00Z3A0 ATA Device)
    (Unallocated)
    111.7 GB (Volume size 1 TB - 931.5 GB)

    Can I say I don’t like your program now?
    I try it not to lose data but to make backup.

    Thanks a lot to all my lose data!

    ----------
    Windows 7 Ultimate 64-bit (English)
     
  2. Joe090

    Joe090 Registered Member

    Joined:
    Jun 18, 2012
    Posts:
    5
    Location:
    USA
    To resolve the "error" (lost F:\ and G:\) I press on "Basic GPT..." (see below)

    *-*Begin-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
    Basic GPT Hard Disk 1 (WDC WD1002FAEX-00Z3A0 ATA Device)
    (Unallocated)
    111.7 GB (Volume size 1 TB - 931.5 GB)
    *-*End-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

    and ask to undelete the partition.
    After that and need to wait more or less one hour, I see another partition:

    *-*Begin-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
    Basic MBR Hard Disk 1 (WDC WD1002FAEX-00Z3A0 ATA Device)
    Name File System Volume Size
    Local Disk Invalid 512 Bytes
    (Unallocated) 931.5 GB
    *-*End-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

    After that I press on "Basic MBR..." (see above)
    and ask to undelete the partition.

    This time my both disk (1TB Hard Disk split in two 500GB each) F;\ and G:\
    was there and with all my data.

    I really don't know what happen but I lose nothing finally.

    So I think your product is great but they have just some "bugs".
     
  3. Joe090

    Joe090 Registered Member

    Joined:
    Jun 18, 2012
    Posts:
    5
    Location:
    USA
    Hum,

    Each time I reboot my hard disk F:\ and G:\ don't appear.
    I need to open "Disk Management" of Windows to activated them (give one letter).

    And if I reboot these letters disappear and I need to do that again.

    Somebody can help?

    I think some driver that "Hard Disk Manager 2011 Server" use, make Windows work bad.
     
  4. Joe090

    Joe090 Registered Member

    Joined:
    Jun 18, 2012
    Posts:
    5
    Location:
    USA
    After to install "Paragon Hard Disk Manager 2011 Server",Windows loses drive letter assigment on reboot.

    Now I need all time run "Disk Management" (from Windows) to choose letter F:\ and G:\ for one of my hard disk (split in two part of 500 GB).

    So I don't suggest to people to use "Paragon Hard Disk Manager 2011 Server" because it's clear it have a driver problem.
     
  5. Zacrux

    Zacrux Registered Member

    Joined:
    Aug 25, 2011
    Posts:
    6
    If you are assigning a drive letter in windows and the letters are not saving on reboot... this looks like a windows problem.
     
  6. Paragon_MA

    Paragon_MA Paragon Moderator

    Joined:
    Aug 17, 2009
    Posts:
    165
    Agree with the last. This more looks like windows problem. Please try to fix system registry with some advanced tools e.g CCleaner.
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.