Hi, I just bought the LnS and still cannot understand how to create rule I have NAS-01G attached to my Linksys WRT54G. The Linksys connected to Internet Cable also. The NAS-01G was set up using IP 192.168.0.18 and the WRT54G used IP 192.168.0.19. How to create the rule so that LnS can work better with WRT54G and NAS-01G? Currently, I could still connect to internet or my NAS, but the log in LnS drives me crazy The Log: D-430 UDP: Any other UDP packet - UDP - [192.168.0.19] - Ports Dest: SSDP/UPnP=1900 Src:SSDP/UPnP=1900 Should I just ignore this log ?? Thank you.
Hi, You can create a rule from the log with a right click on the alert. Then, either everything works fine and there is not need to allow these packet and you have to select the Stop sign for this new rule (so the packets will be still blocked butwith no alert), or these packets are required and there is nothing else to do. For both cases, the log will be cleaner after adding the rule. Regards, Frederic