Bork Tuesday, Any Problems Yet?

Discussion in 'other software & services' started by Daveski17, Nov 12, 2014.

  1. emmjay

    emmjay Registered Member

    Joined:
    Jan 26, 2010
    Posts:
    1,540
    Location:
    Triassic
    I am experiencing this problem too. I have a second monitor (larger with better resolution than my laptop), so it looks as though the problem is associated with screen resolution itself. No solution at this time but hopefully MS will address it in the next build as it is annoying. Sometimes even the settings get changed, e.g if I have the icon set to show icon and notifications, it gets changed to something else, like only show notifications. This only happens after changing screens.

    https://answers.microsoft.com/en-us...essageId=f0fbc417-99df-4c04-9a95-379947a010fd
     
  2. guest

    guest Guest

    Once again, KB 4023057 gets pushed out to all Win10 versions — and you don’t want it
    September 9, 2018
    https://www.askwoody.com/2018/once-...t-to-all-win10-versions-and-you-dont-want-it/
     
  3. itman

    itman Registered Member

    Joined:
    Jun 22, 2010
    Posts:
    8,592
    Location:
    U.S.A.
  4. JRViejo

    JRViejo Super Moderator

    Joined:
    Jul 9, 2008
    Posts:
    97,410
    Location:
    U.S.A.
     
  5. Reality

    Reality Registered Member

    Joined:
    Aug 25, 2013
    Posts:
    1,198
    Trying to fix a family member W7 Laptop. On shut down theres repeated instances of installing 1 0f 1 . Looking at the update history it seems there's repeated entries for KB 4011274 and KB4022206. One of those is the 1 of 1 thing and is an important update. I take it because of that I cant uninstall it, because I can't find it in the installed updates. I'm not that familiar with W7. I've hidden it and now the 1 0f 1 message doesn't show. Is there any way I can nuke this thing properly?
     
  6. Stupendous Man

    Stupendous Man Registered Member

    Joined:
    Aug 1, 2010
    Posts:
    2,839
    Location:
    the Netherlands
    KB4011274 is the security update for Office 2010: May 8, 2018.
    KB4022206 is the security update for Office 2010: July 10, 2018.

    July KB4022206 replaces the May update KB4011274.
    So, if KB4022206 is installed, you can ignore KB4011274.
    If KB4022206 is installed, and you hid KB4011274, that is OK.

    If KB4011274 is installed and not KB4022206, then KB4022206 still needs to be installed.
    In that case, you can manually download KB4022206 and install it.

    "Method 3: Microsoft Download Center" in the KB4022206 knowledge base article is probably the easiest way to download KB4022206.
    See the knowledge base article for details and for the 32-bit or 64-bit download from the Microsoft Download Center.

    If you are not sure if the computer is running a 32-bit or 64-bit version of Windows 7,
    open System by clicking the Start button, right-clicking Computer, and then clicking Properties.
    (If there is no "Computer" in Start, search for System in the search box, or go to Control Panel, System and Security, System).
    Under System, you can view the system type, 32-bit or 64-bit.
     
  7. Kerodo

    Kerodo Registered Member

    Joined:
    Oct 5, 2004
    Posts:
    8,013
    Just did the September updates on Win 10 1803 and nothing exploded, so I guess I'm ok. I'll do 7 tomorrow probably, after I take an image of 10.
     
  8. Minimalist

    Minimalist Registered Member

    Joined:
    Jan 6, 2014
    Posts:
    14,881
    Location:
    Slovenia, EU
    I installed Windows 7, Office 2010 and .NET updates and didn't notice any problems so far. Blank page on redirect in IE seems to be fixed on my system.
     
  9. Dragon1952

    Dragon1952 Registered Member

    Joined:
    Sep 16, 2012
    Posts:
    2,469
    Location:
    Hollow Earth - Telos
    Reported error 0x8000FFFF with the Win7 Monthly Rollup KB 4457144.
     
  10. itman

    itman Registered Member

    Joined:
    Jun 22, 2010
    Posts:
    8,592
    Location:
    U.S.A.
    KB44557128 Sept. cumulative update on Win 10 1803 took two tries. Thought the first download of it went way to fast. First time this has happened in a while.
     
  11. Stupendous Man

    Stupendous Man Registered Member

    Joined:
    Aug 1, 2010
    Posts:
    2,839
    Location:
    the Netherlands
    I installed KB4457144, September 11, 2018, Monthly Rollup for Windows 7, and KB4457918, Security and Quality Rollup updates for .NET Framework, and MSRT KB890830. That all went well.
    However, now Windows DEP closed IE11 because of WOT.
    The old WOT for IE was not 'evil' like WOT for Firefox, but WOT for IE seems abandoned by the developers, and now with the latest Windows updates, WOT is no longer compatible with IE.
    So it's goodbye to WOT for IE.
     
  12. Osaban

    Osaban Registered Member

    Joined:
    Apr 11, 2005
    Posts:
    5,614
    Location:
    Milan and Seoul
    Very fast and flawless update of Win 10 Home (64 bit) 1803 to build 17134.285 on two machines...
     
  13. guest

    guest Guest

    Restored previous backup (from previous clean Cumulative Update) > updated Windows and apps > made a new Backup.

    no issues so far, on all machines (as always).
     
  14. stapp

    stapp Global Moderator

    Joined:
    Jan 12, 2006
    Posts:
    23,933
    Location:
    UK
    Same here. Does it have (2) after it in the Installed Updates list in settings?
     
  15. Brian K

    Brian K Imaging Specialist

    Joined:
    Jan 28, 2005
    Posts:
    12,113
    Location:
    NSW, Australia
    Same here with 3 computers. Yes, it does have (2) after it in the Installed Updates list in settings.
     
  16. pegas

    pegas Registered Member

    Joined:
    May 22, 2008
    Posts:
    2,961
    The KB in question installed on the first attempt and created only one entry in the list of installed updates, in my case. Today's updates were pretty silent and even a reboot wasn't required. Actually I didn't notice them at all.
     
  17. stapp

    stapp Global Moderator

    Joined:
    Jan 12, 2006
    Posts:
    23,933
    Location:
    UK
    Very strange that your cumulative didn't require a reboot.
     
  18. Brian K

    Brian K Imaging Specialist

    Joined:
    Jan 28, 2005
    Posts:
    12,113
    Location:
    NSW, Australia
    I restored one of my computers to yesterday (using an image) and ran Check for updates. The Cumulative one downloaded and installed within a few seconds. Strange, too fast. In Update History the Cumulative update showed as successfully installed. When all updates had been installed, Check for updates ran again, automatically. The Cumulative update was present and on this occasion downloading and installing took a long time.
     
  19. pegas

    pegas Registered Member

    Joined:
    May 22, 2008
    Posts:
    2,961
    Right. Hence I run Check for updates as did @Brian K and the KB was downloaded and installed (again), this time with a reboot. Only one entry entry of the KB in the list showed up but now ending with (2).
     
  20. stapp

    stapp Global Moderator

    Joined:
    Jan 12, 2006
    Posts:
    23,933
    Location:
    UK
    I bet this will catch a few people out, thinking they have the cumulative when in fact they don't.

    Strange that Win Updates should mess up like this isn't it :D
     
  21. pegas

    pegas Registered Member

    Joined:
    May 22, 2008
    Posts:
    2,961
    Yeah, they will be happy (like me) that Microsoft finally began to deliver cumulative updates without rebooting. :D
    Absolutely unprecedented thing. :isay:
     
  22. pegas

    pegas Registered Member

    Joined:
    May 22, 2008
    Posts:
    2,961
    Microsoft writes ... :argh:
     
  23. Reality

    Reality Registered Member

    Joined:
    Aug 25, 2013
    Posts:
    1,198
    @Stupendous Man - thanks for your reply and explaining the update.
    I'm not at that computer and wont be for a few days but the "stuck" update was 144kbs and had 32bit in all the entries. This computer is 64bit. Not sure why it would install a 32bit version.
     
  24. Floyd 57

    Floyd 57 Registered Member

    Joined:
    Mar 17, 2017
    Posts:
    1,296
    Location:
    Europe
    Security Update for Flash Player and KB4456655 installed successfully, they didn't need a restart

    However, KB4457128, which is the real update 17134.285, made me pull my hair out until I managed to fix my pc (because ofc I didn't make a backup before installing it)

    After the required restart, my pc would be stuck in "Just a moment" loop indefinitely and wouldn't boot onto the login screen

    Just in case anyone else experiences this problem, here's how to fix it: Start in Safe mode (4), then disable network adapters, wifi vpn plug off ethernet cables etc., then start in Safe Mode with Networking (5) (otherwise you can't start in safe mode with networking, it doesn't work) Open cmd, type "dism /cleanup-mountpoints", after that delete c:\windows\winsxs\pending.xml (you can see the pending packages with "dism /online /get-packages", the last two will be install and uninstall pending), but first you need to edit its security permission, change owner to Administrators then add full control for Administrators, then you can delete it, then type "dism /online /cleanup-image /revertpendingactions" , that should fix it but "Package_for_RollupFix~31bf3856ad364e35~amd64~~17134.285.1.7" state is still Staged next time when pc is booted, I'm gonna try installing it again and see what happens, make sure to make a backup before you install an important update, don't be me wasting countless hours troubleshooting cuz my last backup was 2 days ago so I didn't wanna lose progress
     
  25. Stupendous Man

    Stupendous Man Registered Member

    Joined:
    Aug 1, 2010
    Posts:
    2,839
    Location:
    the Netherlands
    That seems rather odd, indeed.
    Could it be that a 32-bit version of Microsoft Office 2010 is installed on that 64-bit Windows 7 system, so that it needs the updates for the 32-bit version of Office 2010?
    I don't know much about Microsoft Office. I hope someone else who knows more about Microsoft Office can help you with this.

    Edit
    It is very well possible that the 32-bit version of Microsoft Office 2010 is installed on that 64-bit Windows 7 system.
    The 32-bit version is the default when Microsoft Office 2010 is installed.
    You can check in Office 2010 which version is installed.
    If the 32-bit version of Microsoft Office 2010 is installed on that 64-bit Windows 7 system, you would need to download the 32-bit version of the update from Microsoft Download Center.

    Documentation:
    How-To Geek: How Do I Know if I’m Running 32-bit or 64-bit Office 2010?
    Microsoft: About Office: What version of Office am I using?
    Microsoft: Install Office 2010 (that shows that the 32-bit version is the default when Office 2010 is installed)
     
    Last edited: Sep 13, 2018
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.