On demand scan setting

[guilijan]

I have a doubt with setting on demand scan.
I use Blackspear settings, manual setting, and whant to know why dont check in Scan targets, "operating memory"?
Thank you in advance.
http://www.wilderssecurity.com/showt...=197509&page=2

[Bubba]

If you walk thru the Custom scan setup in the tutorial starting here, you will notice Blackspear selected C: drive as the Scan targets, in the next pic he selected Setup, once in Setup(the next pic), he then selected which Objects and Operating memory was one of those objects selected.

Bubba

[guilijan]

Thank you Bubba,
But in Blackspear recomended settings, in "In-depth scan" setting is not cheked, just curious

[Bubba]

Originally Posted by guilijan

But in Blackspear recomended settings, in "In-depth scan" setting is not cheked, just curious

Are you meaning the Blackspears Settings.xml file that one can download at the bottom this post ?

If so, I would suggest you import the file and then re-check because Operating memory is enabled in that xml file.

from Blackspears Settings.xml


If that is not what you are speaking, Please be a tad more specifc in your explanation and\or show a pic of where you are actually speaking of so that others can possibly assist you properly.

Bubba

[guilijan]

Bubba just follow the link I posted at top ofthis thread and see #28 to #35 specially #35.
I'm not speaking about Blackspears Settings.xml
I'm speaking about Blackspears settings but manual setting, following the guide.

But I just check Operating memory so all is good

[Bubba]

Originally Posted by guilijan

Bubba just follow the link I posted at top ofthis thread and see #28 to #35 specially #35.

I did follow the link earlier but was unsuccessful in explaining to you why it's not selected there but it is selected where is appropriate

But I just check Operating memory so all is good

If having it checked twice is good for you, that's what counts