[Paragon GPT Loader] Create Partition

[Viper780]

When i'm creating a partition on my Raid (2x2TB Hitachi HDD on Ich10r Raid-0 - 2 Raid Volumes 1 with 500GB with MBR, second 3,5TB with GPT) i can only create a 2TB Partition but this is OK for me (and i guess having "only" 32bit WinXP is there the problem) so i gave it a try but the following failure occurred


i guess there is a trouble with assigning a drive letter and mounting it.
Under Administrative Tools->Computer Management->Disk Management i don't see the GPT Volume or any Partition.


i've tried it again an made a 3,4TB and a about 100GB Partition but the same happens so i want to delete both partitions but i see only the last one. When this 100GB partition is gone i cant format or delete any other partition and i dont't see any other partition on the GPT Volume.

The Problem is now i can only create a 3GB Partition



a restart didn't help
here are the log files (just remove the .log from the extension)
Logs_101223_1005.zip.log

[Mech_An]

RAIDed configurations are not supported. It is written on the GPT Loader page

Note! The current version of Paragon GPT Loader cannot help you to accommodate Windows OS on a 2.2TB+ drive. Its main purpose is to provide access to 2.2TB+ drives connected internally as a secondary device under any Windows OS since XP. Only internally connected single 2.2TB+ drives are supported, not external storages, or those combined into RAID (Redundant Array of Independent Disks).