JohannesH
July 4th, 2005, 03:47 AM
Hi!
I have installed Disk Director Suite 9 (latest build) and also OS Selector 9.
The following config worked OK for some month now:
First Disk: 3 Primary NTFS Partitions (Windows XP Prof. OS Partitions)
Ext. Partition with 3 more NTFS log.drives and 1 FAT32 log. drive where OS Selector was installed.
The setup was done in the way, that 2 of the primary WinXP partitions where hided against the third (for all 3). That means when booting partition 1, partition 2 and 3 were hided, when booting 2, 1 and 3 were hided etc.
Recently I discovered that the time from the first message from OSS "Working, please wait" (translated from german) until the OS selection menu appears has grown dramatically. Before this it took some seconds, and now it was some minutes!!! I tried this some more times but always it took some minutes, no error message. After booting WinXP was running just normal.
So I decided to reinstall OS Selector. Before I started, I checked all partitions with chkdsk and I let run the Maxtor test utility (Full read only test) on the drive - all without an error.
Next step - Reinstall OSS:
a) Install from bootable media: I choose "custum installation" and tell OSS to install into the FAT32 log. drive within the extended partition (as it was before). At the end when OSS is actually writing to the disk I receive errors:
"Error writing sector xxx" with different sector numbers.
b) Install from within WinXP: I choose the same installation options and at the end I do not get the "Error writing sector xxx" message but it simply hangs and does not finish. Even Task-Manager cannot abort the process.
I have multiple times deleted, created and formatted the log. drive where OSS should get installed but no change.
Interesting: At the end I ran out of ideas but I need this machine and must boot the 3 WinXP partitions. So I gave it a try and did exactly the same with OS Selector 8.0 (install from bootable media). And this installs OK and so I am now able to boot my 3 Windows partitions. I even tried now one more install of OSS 9 over the now working OSS 8 (same situation as I originally upgraded from OSS 8 to 9). But again "Error writing sector xxx".
What is going on here?
Any ideas?
Thank you
Johannes
I have installed Disk Director Suite 9 (latest build) and also OS Selector 9.
The following config worked OK for some month now:
First Disk: 3 Primary NTFS Partitions (Windows XP Prof. OS Partitions)
Ext. Partition with 3 more NTFS log.drives and 1 FAT32 log. drive where OS Selector was installed.
The setup was done in the way, that 2 of the primary WinXP partitions where hided against the third (for all 3). That means when booting partition 1, partition 2 and 3 were hided, when booting 2, 1 and 3 were hided etc.
Recently I discovered that the time from the first message from OSS "Working, please wait" (translated from german) until the OS selection menu appears has grown dramatically. Before this it took some seconds, and now it was some minutes!!! I tried this some more times but always it took some minutes, no error message. After booting WinXP was running just normal.
So I decided to reinstall OS Selector. Before I started, I checked all partitions with chkdsk and I let run the Maxtor test utility (Full read only test) on the drive - all without an error.
Next step - Reinstall OSS:
a) Install from bootable media: I choose "custum installation" and tell OSS to install into the FAT32 log. drive within the extended partition (as it was before). At the end when OSS is actually writing to the disk I receive errors:
"Error writing sector xxx" with different sector numbers.
b) Install from within WinXP: I choose the same installation options and at the end I do not get the "Error writing sector xxx" message but it simply hangs and does not finish. Even Task-Manager cannot abort the process.
I have multiple times deleted, created and formatted the log. drive where OSS should get installed but no change.
Interesting: At the end I ran out of ideas but I need this machine and must boot the 3 WinXP partitions. So I gave it a try and did exactly the same with OS Selector 8.0 (install from bootable media). And this installs OK and so I am now able to boot my 3 Windows partitions. I even tried now one more install of OSS 9 over the now working OSS 8 (same situation as I originally upgraded from OSS 8 to 9). But again "Error writing sector xxx".
What is going on here?
Any ideas?
Thank you
Johannes