PDA

View Full Version : Error 90 and 1517


pocahontas
February 15th, 2005, 04:40 AM
Hi,
the following Errorcodes were shown in the "Verwaltung/Ereignisanzeige". The first shows a PG conflict, right? The second a generell conflict, right?

All Avast and Prozessguard (all secure/main prozess) have got the same:

this prozess is a allowed to read, modify and terminate protected programms and is protected from modify and terminate from other programms.

What´s my fault?

Sincerely
pocahontas



1.)

Ereignistyp: Warnung
Ereignisquelle: avast!
Ereigniskategorie: Client
Ereigniskennung: 90
Datum: 15.02.2005
Zeit: 10:27:48
Benutzer: Nicht zutreffend
Computer: NOTEBOOK-1
Beschreibung:
AAVM - scanning warning: x_AavmCheckFileDirectEx [UNI]: C:\WINDOWS\system32\pghash.dat (C:\WINDOWS\system32\pghash.dat) returning error, 00000005.






2.)

Ereignistyp: Warnung
Ereignisquelle: Userenv
Ereigniskategorie: Keine
Ereigniskennung: 1517
Datum: 15.02.2005
Zeit: 10:11:15
Benutzer: NT-AUTORITÄT\SYSTEM
Computer: NOTEBOOK-1
Beschreibung:
Die Registrierung des Benutzers "NOTEBOOK-1\Administrator" wurde gespeichert, obwohl eine Anwendung oder ein Dienst auf die Registrierung während der Abmeldung zugegriffen hat. Der von der Registrierung des Benutzers verwendete Speicher wurde nicht freigegeben. Der Upload der Registrierung wird durchgeführt, wenn diese nicht mehr verwendet wird.

Dies wird oft durch Dienste verursacht, die unter einem Benutzerkonto ausgeführt werden. Versuchen Sie diese so zu Konfigurieren, dass sie unter den Konten "Lokaler Dienst" oder "Netzwerkdienst" ausgeführt werden.

Weitere Informationen über die Hilfe- und Supportdienste erhalten Sie unter http://go.microsoft.com/fwlink/events.asp.

Pilli
February 15th, 2005, 05:02 AM
Hi pocahontas, I'm afraid I do not read German? but Avast cannot interfere with ProcessGuard's .dlls pguard & pghash as these files are protected files.
I also do not use Avast but many AV / AT programs allow you to put certain files on an always allow list so that they are not scanned.

Maybe a German reader will assist you further :)

HTH Pilli

pocahontas
February 15th, 2005, 10:31 AM
-{ Quote: "put certain files on an always allow list so that they are not scanned." }-

The problem still exists. So I think I have to change the rules in ProzessGuard.
Am I right?

Pilli
February 15th, 2005, 10:47 AM
No need to alter ProcessGuard it is simply that your AV cannot read ProcessGuards data files as they are protected. :)

HTH Pilli