[Paragon GPT loader] BSOD after soft install...

[FrenchDexter]

My config :
XP32 SP3
intel quadcore CPU
4gb DDR2
WD 3TB drive
...


After installing GPT LOADER , i've been asked to reboot.
After reboot, when XP is loading i get a Blue Screen, it stays a quarter
of second on screen, so its not possible for me to read what is written.
I also get blue screen if i try to start XP in "Safe Mode".
Only way for me is to run it to a previously state (last good config).
Maybe this is due to GPT loader drivers causing blue screen...
If someone can help, i can send any log if needed...

[Mech_An]

Could you please provide mini dump file for review?
Minidumps are usually located in root directory of C:/. Please go to C:\Windows\Minidump, find file with *.dmp extension and upload it here or to any file hosting.

[FrenchDexter]

Sorry for Delay Mech AN,

found no *.dmp file (system configured for showing hidden & system files of course) . So i installed GPT drivers again to make my system crash again.
But no minidump files are created.
For info the BSOD appears just after XP logo , so maybe its too early , i mean minidumps are not managed at this stage...

I can't read BSOD content coz it stays only quarter of second, but if that can help you maybe i can record the bsod with a CAM then i will have a picture of it.
Tell me if this could help ya.

PS: i use latest gpt loader (build 10.0.16.12579_001).

thx alot in advance.

[Mech_An]

@FrenchDexter

Do you have Acronis installed?

Please try to restore the last known good configuration and check the following:
* run Regedit.exe (Start – Run - type: ‘regedit’ and press enter)
* Find HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}\UpperFilters
* Check what values exist in UpperFilters.

[FrenchDexter]

Mech An,

I don't have acronis installed.

Here are values stored in regkey u pasted in previous post :

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}]
"UpperFilters"=hex(7):50,00,61,00,72,00,74,00,4d,00,67,00,72,00,00,00,00,00
"Class"="DiskDrive"
@="Lecteurs de disque"
"Installer32"="StorProp.Dll,DiskClassInstaller"
"SilentInstall"="1"
"NoInstallClass"="1"
"TroubleShooter-0"="hcp://help/tshoot/tsdrive.htm"
"Icon"="-53"



in ascii , "UpperFilters"="PartMgr" ...

PS : i have daemon tools pro installed (1 virtual scsi dvd drive) + sptd. But i dont think sptd is involved in crash because i have the same crash when running XP in "Safe Mode" and sptd is not loaded ...

[Mech_An]

I apologize for delay.

What WD 3TB drive model do you have?
Is it connected directly via SATA or thru the SATA but using HBA (specific adapted shipped with the drive) ?

[FrenchDexter]

The WD drive : Western Digital Caviar Green 3 Tb 64 Mb Serial ATA II - WD30EZRSDTL.

And yes, with the drive, WD gave a PCI-E serial ATA controler,called : Rocket 620WDALF.

I use the controler and the 3tb drive is plugged on it. But i also tried to plug the drive directly on sata port of mobo , but it crashes same way with drive plugged directly on mobo.