Bootable media builder doesnt detect my internal disc made of 2 partitions

[fulgur]

Hey, please help me! I am in a big trouble! I am using Acronis Disk Director Suite 10 and I made a bootable media builder on my CD... Then I boot from this CD and the procedure was like this:

http://www.shrani.si/f/3r/90/JWdrwpD/1/02042009177.jpg
http://www.shrani.si/f/1T/11V/1Bzgur4x/1/02042009178.jpg
http://www.shrani.si/f/47/PJ/ybfn2To/1/02042009179.jpg
http://www.shrani.si/f/2j/Wx/W2EBdpO/1/02042009180.jpg
http://www.shrani.si/f/39/3i/2ejMI4Nk/1/02042009181.jpg

So my internal disk was not detected: there is some error on the last picture... It detects only my 2 external western digital harddisks (500 GB and 1 TB)....

Actually I have such kind of disks on my computer:
- internal one (made od 2 partitions)
- 2 external western digital harddisks (500 GB and 1 TB)
http://www.shrani.si/f/V/10/2R3rq4QT/untitled.jpg

[MudCrab]

Are you using the latest build of DD 10 (2,160 or later)?

For the Full Mode version of DD from the CD, have you tried the quiet acpi=off noapic option detailed in Section II of the PLEASE READ BEFORE YOU POST (http://www.wilderssecurity.com/showthread.php?t=55317) thread?

Have you tried the Safe Mode version of DD?

Do you have any other USB "drive-type" devices connected (iPOD, media card readers, printers with media slots, etc.)? If so, have you tried with those disconnected?

[fulgur]

Thanks.... I tried to unplug all usb devices but it was no difference... So finally I used safe mode of bootable version of Acronis and it worked perfectly... So I must thank you for help!!!

Thanks :-*