Panda Internet security 2009 failed shields up

[anderb]

Hello friends,I´ve installed this suite,after I tested shields up and I failed cause ping reply was received.How can I set up panda firewall to pass on shields up tests?
Thanks for your help:)

[Jaki]

You are probably one of the rare persons who are using Panda. I can't help you there. However, send the bear an e-mail and find out. :isay:


Peace.

[anderb]

Thank u Jaki for your precious help,I solved the problem:isay:

[The Hammer]

-{ Quote: "Thank u Jaki for your precious help,I solved the problem:isay:" }-How did you manage it?

[ASpace]

-{ Quote: "How did you manage it?" }-

Either by setting up the router or by setting-up a rule for controlling ICMP ? :argh:

[The Hammer]

-{ Quote: "Either by setting up the router or by setting-up a rule for controlling ICMP ? :argh:" }-That's how I did it by adjusting my router as I don't use a software firewall.

[david banner]

if you don't use a software firewall would that not cause the fail at shields up?

[xXDarkStalkerxX]

-{ Quote: "if you don't use a software firewall would that not cause the fail at shields up?" }-

Anderb who failed at shields up not The Hammer. A hardware firewall or a good router firewall is much better than a software firewall anyway :P

[david banner]

-{ Quote: "Anderb who failed at shields up not The Hammer. A hardware firewall or a good router firewall is much better than a software firewall anyway :P" }-
oops sorry:-[

[Jaki]

-{ Quote: "Thank u Jaki for your precious help,I solved the problem:isay:" }-

You are welcome, anytime. ;D


Peace.