Nero Burning failed?

[scorpio88]

Hopefully someone here can help me. I am trying to make a few copies of a DVD but it keeps failing (homemade, it's of a TV show that's not released on DVD so it's not security issues - I had taped it back in 2000 but my VHS tape is getting old so a friend put it on DVD for me, and now I want to make some copies of it for backup).

Now I was able to copy it once, but now for some reason I keep getting the same error about halfway to the end of the burning process. It's getting frustrating as I've gone through 22 DVD-Rs and I'm not made out of money. Please help (and thanks in advance)...I attached the log below:


---------


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\nero\Wnaspi32.dll':

Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <MATSHITA DVD-RAM UJ-841S>Version: 1.00 - HA 0

TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA DVD-RAM UJ-841S >Version: 1.00 - HA 0

TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2060AT PL atapi Port 0

ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-841S atapi Port 0

ID 1 DMA: On

=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-841S E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 495MB (507184kB)
Free physical memory: 39MB (40200kB)
Memory in use : 92 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.2.2008
UDF/ISO compilation
6:25:55 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

6:25:56 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.IFO has been modified

6:25:56 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.BUP has been modified

6:25:56 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_01_0.IFO has been modified

6:25:56 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_01_0.BUP has been modified

6:25:56 PM #6 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_02_0.IFO has been modified

6:25:56 PM #7 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_02_0.BUP has been modified

6:25:56 PM #8 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_03_0.IFO has been modified

6:25:56 PM #9 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_03_0.BUP has been modified

6:25:56 PM #10 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_04_0.IFO has been modified

6:25:56 PM #11 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_04_0.BUP has been modified

6:25:56 PM #12 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_05_0.IFO has been modified

6:25:56 PM #13 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_05_0.BUP has been modified

6:25:56 PM #14 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_06_0.IFO has been modified

6:25:56 PM #15 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_06_0.BUP has been modified

6:25:56 PM #16 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_07_0.IFO has been modified

6:25:56 PM #17 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_07_0.BUP has been modified

6:25:56 PM #18 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_08_0.IFO has been modified

6:25:56 PM #19 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VTS_08_0.BUP has been modified

6:25:56 PM #20 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed

6:25:56 PM #21 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

6:25:56 PM #22 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

6:25:56 PM #23 Text 0 File Reader.cpp, Line 127
Reader running

6:25:56 PM #24 Text 0 File Writer.cpp, Line 122
Writer MATSHITA DVD-RAM UJ-841S running

6:25:56 PM #25 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

6:25:56 PM #26 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

6:25:56 PM #27 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

6:25:56 PM #28 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45,

4489MB)
Last address to be written: 2066463 (459:12.63,

4036MB)

6:25:56 PM #29 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

6:25:56 PM #30 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: MATSHITA DVD-RAM UJ-841S, Media type: DVD-RW
Disc Manufacturer: MBI01R - WG 20
Disc Application Code: 2, Disc Physical Code: 214

6:25:56 PM #31 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:25:56 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line

830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2066464 (2066464) =

#2066464/459:12.64
relocatable, disc pos for caching/writing not required/

required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks,

length 2066464 blocks [MATSHITA DVD-RAM UJ-841S]
--------------------------------------------------------------

6:25:56 PM #33 Text 0 File ThreadedTransferInterface.cpp, Line

1043
Prepare recorder [MATSHITA DVD-RAM UJ-841S] for write in

CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0

0 4232118272, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2066464 | lead-out | 1 | 0x41 | 0x00

6:25:56 PM #34 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

6:25:56 PM #35 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

6:25:56 PM #36 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

6:25:56 PM #37 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2770 KB/s)

6:25:56 PM #38 Text 0 File ThreadedTransferInterface.cpp, Line

2609
Verifying disc position of item 0 (relocatable, disc pos, no

patch infos, orig at #0): write at #0

6:25:56 PM #39 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

6:25:56 PM #40 Text 0 File Mmc.cpp, Line 21469
Set BUFE: SmoothLink -> ON

6:25:56 PM #41 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

6:25:56 PM #42 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 3
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path

(PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74

um/track
Starting Physical Sector Number of Data Area: 30000 h

(DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN:

FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00

................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

................

6:36:12 PM #43 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x06980000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0C 0x55 0x00 0x00 0x00 0x20 0x00

0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x0C 0x51 0xF0 0x0A
0x00 0x2A 0x00 0x00 0x03 0x00

6:36:12 PM #44 CDR -400 File Writer.cpp, Line 311
Unspecified target error

6:36:13 PM #45 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

6:36:13 PM #46 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

6:36:14 PM #47 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 808191

6:36:14 PM #48 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...

6:36:14 PM #49 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2770 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created

24/07/2006 3:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.40a, size=36528 bytes, created

24/07/2006 3:00:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180

(xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004

10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows

NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[NICK ADSL UK]

Hi scorpio88 :)
You could try updating to the latest build for version 6 as that may very well help ?

http://www.nero.com/enu/downloads-nero6-update.php

[scorpio88]

Tried it, but it still fails. :(

[zfactor]

are you trying to copy the originl again or the copy?

[scorpio88]

The original. I'm doing everything that I did the time before. What I did the first time was copy the VIDEO_TS folder (the only folder the original had), and save it to my HD. Then I opened up Nero StartSmart (6) and went to the Video/Photos option, and DVD-Video one. Put the blank DVD-R in and burn. It fails near 75-99% now, however even though it failed, I put the burned copy in and it seems to work fine on the computer so far. I don't know about a DVD Player though. Just wondering why it fails near the end.

[nanana1]

Don't use Nero bloatware, try DVDFabPlatinum, it copies to your hard disk first before writing to DVD.

Also, use a DVD-RW to try first to avoid creating coasters:D

[zfactor]

try slysoft clone dvd.. i also hate nero

[scorpio88]

Tried using that program, got the same thing happen to me. I tried another program my friend suggested, and it gave me a hardware error. Does anyone know what to do (in terms of the hardware error)? It was working fine the other day. ???

[zfactor]

could the disc now be bad for some reason? can you scan it with nero to see??

[scorpio88]

The drive? How can I do that?

If you mean the actual DVD-R, I keep using new ones each time.

[Huupi]

what brand of media are u using,it happen freqently that switching media brand solve the burning problem,one good to go is Verbatum,for me i ditched Philips and TDK for Verbatum and it solved my burning problems.

Admit that yours is maybe a different cause but at least you can try.

http://www.digitalfaq.com/media/dvdmedia.htm

[GlobalForce]

Hi Scorpio,

I'm no expert but a few observation's stand out:

Dated firmware - http://forum.rpc1.org/dl_firmware.php?download_id=2244
*Investigate carefully the process of upgrading should that be the course you take.
-{ Quote: "Recorder: <MATSHITA DVD-RAM UJ-841S>Version: 1.00 - HA 0" }-

The upgrade shown in the wine emulator will specify whether it's applicable.

197452


Memories too high. Disable cpu eater's prior to burning.
-{ Quote: "Physical memory : 495MB (507184kB)
Free physical memory: 39MB (40200kB)
Memory in use : 92 %" }-

Though your disk's are recognized, consider more appropriate media.
_oogle these code's for a suggested drive/media compatibility chart. ;)
-{ Quote: "Disc Manufacturer: MBI01R - WG 20 (Moser Bauer)
Disc Application Code: 2, Disc Physical Code: 214" }-

The ratio of used vs available free space on your drive?

http://www.wilderssecurity.com/attachment.php?attachmentid=196438&d=1199134962


Does nero's info tool confirm your drive can handle the write speed?


Check your event log's. Are any listing drive related error's?


Make certain all physical connection's are secure.



GF

[zfactor]

no i mean scan the original disc being used the you are trying to make a copy of to see if there is anything wrong with it now