utorrent rules?

[shirike]

I have 8 rules set for utorrent.exe


1. Outbound TCP Allow on ports 80, 8080 (for trackers)

2. Inbound TCP/UDP Allow on all ports, remote address 127.0.0.1 (for loopback)

3. Outbound TCP Allow on ports 1024 - 65535 (for peers)

4. Inbound TCP Allow on ports 1024 - 65535 to local port 50321 (listening - this is my port forwarding rule)

5. Inbound UDP Allow on ports 1024 - 65535 to local port 50321 (listening)

6. Inbound TCP Block All

7. Outbound TCP Block All

8. Inbound/Outbound UDP Block All



but it doesn't appear to work - checking port forwarding using the utorrent Speed Guide shows the port is not being forwarded.


Where am I going wrong?

[Alf_]

I think you made these rules assuming they are applied in this particular order (like the old Kerio PF 2 did).
-{ Quote: "6. Inbound TCP Block All
7. Outbound TCP Block All
8. Inbound/Outbound UDP Block All" }-These rules are useless. Delete them and test again.

[shirike]

Deleting those did help but I still receive prompts for rules when utorrent is connecting and the "Logger" screen in utorrent shows 192.168.0.1 is being blocked - that's the ip address of my router

[Alf_]

-{ Quote: "Deleting those did help but I still receive prompts for rules when utorrent is connecting and the "Logger" screen in utorrent shows 192.168.0.1 is being blocked - that's the ip address of my router" }-
Add a rule for this traffic (Router-IP/Port) or better, add the Router-IP to the Trusted zone.