PDA

View Full Version : Port 1


benida
December 9th, 2006, 07:00 AM
I testing my ports to GRC, and I've got these results:

----------------------------------------------------------------------

GRC Port Authority Report created on UTC: 2006-12-09 at 11:48:40

Results from scan of ports: 0-1055

0 Ports Open
1 Ports Closed
1055 Ports Stealth
---------------------
1056 Ports Tested

NO PORTS were found to be OPEN.

The port found to be CLOSED was: 1

Other than what is listed above, all ports are STEALTH.

TruStealth: FAILED - NOT all tested ports were STEALTH,
- NO unsolicited packets were received,
- NO Ping reply (ICMP Echo) was received.

----------------------------------------------------------------------

and these are my rules:

185755

but I've always the same results from GRC.
Help me please

Hermescomputers
December 9th, 2006, 01:26 PM
Look @ my graphic and see the "Blue" Arrow you need to include both ports in the rule not just one!

zapjb
December 9th, 2006, 03:29 PM
http://www.wilderssecurity.com/showthread.php?t=101643

benida
December 9th, 2006, 05:20 PM
I did try it, but I've the same results in the GRC test.

benida
December 9th, 2006, 05:24 PM
-{ Quote: "http://www.wilderssecurity.com/showthread.php?t=101643" }-

Thanks,
but it was all day that I did read old message in the forum, but nothing...
the port 1 is closed and no stealth!

farmerlee
December 9th, 2006, 06:21 PM
I followed the advice in this thread and it stealthed both ports 1 & 2 for me.
http://www.wilderssecurity.com/showthread.php?t=148627

Hermescomputers
December 10th, 2006, 11:23 AM
-{ Quote: "I did try it, but I've the same results in the GRC test." }-

Your probably behind a router with a built in firewall or perhaps a dsl modem with a firewall... that would be where the fault is. Those settings work unless you have another layer between your Ghostwall and the testing site.