Asus
April 19th, 2006, 09:48 AM
hello everybody,
To begin i'm apologize for my bad english i hope that you can help me the best you can and help me step by step.
I use Acronis SnapDeploy v1.0.1307 install on a MS 2003 server domain controler ( 192.168.100.1) with DHCP service (192.168.100.2 to 192.168.100.253) on MS VirtualPC.
I already have got an image ( windows XP PRO done with Cloneur Expert ) of the target computer ( DELL GX1 ) save on the server's HDD, and i do 2 differents templates to deploy on 2 target computers ( 2 differents IP configuration and computer names to avoid troubles on the network ).
When i boot the target computer with PXE they receive a IP from my DHCP ( 192.168.100.2 and 192.168.100.3 ), and i have the screen to select if i want to run SnapDeploy Agent or continue Windows.
I select to run SnapDeploy Agent and a few minutes after i've got a screen of the session and the target computer wait for deployement.
The 2 computers is display on the management console i choose the correct template and i deploy it on the target computers.
The first time i do it, i work perfectly, i can deploy with multicast the 2 computers at the same time.
But now there is a problem.
I format the 2 target computers HDD ( because i believe that is not possible to deploy on a HDD not empty, if is possible please tell me ) .
I want to retest the deployement on the same target computer but now when the session start, the computer shutdown automatically and i don't anderstand why if I retry, it's the same problem.
The 2 computers are no more display on the management console, but there are on the DHCP console.
Morever, when i start the management console i've got this :
Type | module | error ( code ) | date | Time |message
---------------------------------------------------------------------
Information | 100 | 0(0x640000) |19/04/2006|15h42:52|deploy
if you need anothers informations, ask me.
please help me as soon as possible because i need it in a few days.
Thank you
To begin i'm apologize for my bad english i hope that you can help me the best you can and help me step by step.
I use Acronis SnapDeploy v1.0.1307 install on a MS 2003 server domain controler ( 192.168.100.1) with DHCP service (192.168.100.2 to 192.168.100.253) on MS VirtualPC.
I already have got an image ( windows XP PRO done with Cloneur Expert ) of the target computer ( DELL GX1 ) save on the server's HDD, and i do 2 differents templates to deploy on 2 target computers ( 2 differents IP configuration and computer names to avoid troubles on the network ).
When i boot the target computer with PXE they receive a IP from my DHCP ( 192.168.100.2 and 192.168.100.3 ), and i have the screen to select if i want to run SnapDeploy Agent or continue Windows.
I select to run SnapDeploy Agent and a few minutes after i've got a screen of the session and the target computer wait for deployement.
The 2 computers is display on the management console i choose the correct template and i deploy it on the target computers.
The first time i do it, i work perfectly, i can deploy with multicast the 2 computers at the same time.
But now there is a problem.
I format the 2 target computers HDD ( because i believe that is not possible to deploy on a HDD not empty, if is possible please tell me ) .
I want to retest the deployement on the same target computer but now when the session start, the computer shutdown automatically and i don't anderstand why if I retry, it's the same problem.
The 2 computers are no more display on the management console, but there are on the DHCP console.
Morever, when i start the management console i've got this :
Type | module | error ( code ) | date | Time |message
---------------------------------------------------------------------
Information | 100 | 0(0x640000) |19/04/2006|15h42:52|deploy
if you need anothers informations, ask me.
please help me as soon as possible because i need it in a few days.
Thank you