tong1774
January 9th, 2006, 09:30 AM
I am new here, will like to ask a question regarding Ewido memory scan. Below is my spec before i start with my question:
Hardware:
P4 2.8 Precott
DFI Lanparty UT 915P-T12
1 Gig of Twinmos DDR400 Value Ram
Nvidia 6800GS 258MB
Audigy 2 ZS
Cooler Master 450 True Power
1 X SATA
2 X PATA
2 X DVD Drive
3 X 120MM Medium Speed Case Fan
1 X 80MM Slow Speed Fan
1 X Vantec Fan Card
Software:
Window XP Service Pack 1
Zone Alarm Free Edition
AVG Anti Virus
Adaware & Spybot
Ok after intstalled Ewido it manage to find those other anti virus/spayware/adware missed. But i run into problem when i start scan memory when not in safe mode ( I knew i should have use it in safe mood ) The problem is when it reach 89.9%, the whole system will just freeze up. And after a while my monitor get switch on and off like every 10 sec by itself. The only way to stop it is ALT+DEL to force shut down EWIDO with task Manager.
At first i thought its the processor got heat up and decide to refresh itself. But than i check in SpedFan the temperature during that period of time is ok. And then i check with RivaTuner, the core temperature is fine, but to my surprise my ambient temperature of my 6800GS went up to 127c! Its just there for like less then a sec, but its exactly when my monitor switch on and off. Show i start to conclude that the memory scan of Ewido actually scan my video memory and heat it up, or its a software glitch?
This doesn't happen all the time, but 3 out of 5 times when i scan in normal mode. It didnt happen in safe mode though. So is it because i shouldnt scan memory when i am in normal mode? Oh btw when i am scanning the memory, there is no other application running except those background service. And it didnt happen either when i scan the registry, or directories in noraml mode. Only when i scan memory.
Lastly, do Ewido actually heat up my video ram and cause it to refresh itself to prevent overheating? And would that damage my video card in long terms ( Well i wont scan it in noraml mode any more ) Or, there is only software base glitch and nothing to worry about?
Really appreciate if anybody can help me here, thanks...
Hardware:
P4 2.8 Precott
DFI Lanparty UT 915P-T12
1 Gig of Twinmos DDR400 Value Ram
Nvidia 6800GS 258MB
Audigy 2 ZS
Cooler Master 450 True Power
1 X SATA
2 X PATA
2 X DVD Drive
3 X 120MM Medium Speed Case Fan
1 X 80MM Slow Speed Fan
1 X Vantec Fan Card
Software:
Window XP Service Pack 1
Zone Alarm Free Edition
AVG Anti Virus
Adaware & Spybot
Ok after intstalled Ewido it manage to find those other anti virus/spayware/adware missed. But i run into problem when i start scan memory when not in safe mode ( I knew i should have use it in safe mood ) The problem is when it reach 89.9%, the whole system will just freeze up. And after a while my monitor get switch on and off like every 10 sec by itself. The only way to stop it is ALT+DEL to force shut down EWIDO with task Manager.
At first i thought its the processor got heat up and decide to refresh itself. But than i check in SpedFan the temperature during that period of time is ok. And then i check with RivaTuner, the core temperature is fine, but to my surprise my ambient temperature of my 6800GS went up to 127c! Its just there for like less then a sec, but its exactly when my monitor switch on and off. Show i start to conclude that the memory scan of Ewido actually scan my video memory and heat it up, or its a software glitch?
This doesn't happen all the time, but 3 out of 5 times when i scan in normal mode. It didnt happen in safe mode though. So is it because i shouldnt scan memory when i am in normal mode? Oh btw when i am scanning the memory, there is no other application running except those background service. And it didnt happen either when i scan the registry, or directories in noraml mode. Only when i scan memory.
Lastly, do Ewido actually heat up my video ram and cause it to refresh itself to prevent overheating? And would that damage my video card in long terms ( Well i wont scan it in noraml mode any more ) Or, there is only software base glitch and nothing to worry about?
Really appreciate if anybody can help me here, thanks...